Kim, Kyoung-Nam;Kwon, O-Dal;Shim, Sang-Ryul;Yoon, Jung-Seo;Park, So-Hyang
Asian Journal of Turfgrass Science
/
v.25
no.1
/
pp.1-10
/
2011
This study was conducted to investigate early germination characteristics and germination pattern of new cultivars of creeping bentgrass (CB, Agrostis pall/stris Huds.) under natural room temperature conditions and to analyze differences between alternative and natural conditions. Seven cultivars of CB were tested in the study. Daily and cumulative germination patterns were measured and analyzed on a daily basis. Significant differences were observed in germination pattern, days to the first germination, days to 50% germination, days to 85% germination, and germination rate among cultivars under different environments. The first germination in all entries was initiated between 4 and 5 days after seeding (DAS) under alternative conditions, while between 6 and 8 DAS under natural conditions, being 2 to 3 days later as compared with that of alternative conditions. As for the first germination percentage, it was generally 5 to 25% under alternative conditions. However, 'Penn A-1', 'Penncross', and 'Penn A-4' cultivars showed a vigorous germination, producing 50 to 70%. Under natural room temperature conditions, it was 5 to 10% for the most entries, except 'Penncross', 'L-93', and 'Penn A-4' cultivars which vigorously produced 20 to 50%. Days to the 50% germination in CB resulted in 4 to 10 DAS under alternative conditions, while 6 to 15 DAS under natural conditions, being 2 to 5 days later than under alternative conditions. Days to the 85% germination were 5.90 to 11.75 DAS under alternative conditions and 7.95 to 12.50 DAS under natural conditions. 'Penn A-1' and 'L-93' were the fastest cultivars under alternative and natural conditions, respectively. Regardless of the temperature conditions, the longest cultivar in germination was 'T-1', being over 11 DAS. In-depth comparative data on germination characteristics and germination patterns among CB cultivars would be usefully applied for a practical CB turf establishment in golf course construction etc.
The study was conducted to investigate early establishment characteristics and germination pattern of fine-textured fescues (FF) under natural room temperature and to analyze differences between alternative and natural conditions for a practical application. Six cultivars from Chewings fescue (CF), creeping red fescue (CRF), hard fescue (HF) and sheep fescue (SF) were evaluated in the study. Daily and cumulative germination pattern were measured and analyzed. Significant differences were greatly observed in germination pattern, days to the first germination, days to 60% germination, and germination percentage with environments, species and cultivars. Final germination rate was 29.7 to 80.0% under natural conditions. The first germination was initiated between 8 and 10 DAS (days after seeding) under natural conditions, being 3 to 4 days later as compared with ISTA conditions. Days to the 60% germination were 12.1 to 19.0 DAS, being 3.0 to 4.2 days slower than that under ISTA conditions. CF 'Jamestown II' was the fastest cultivar, while the slowest CRF 'Audubon'. Turf establishment speed was faster with CRF < SF < HF and < CF in order. Information on differences in germination characteristics and pattern between alternative and natural conditions would be practically useful for a golf course construction etc., when established with FF.
All elements and systems of electronics have optimum temperature conditions. A using of the thermoelectric method of cooling is the most approach for the thermal management of power electronics. An analysis of using the thermoelectric cooling and the temperature control is given as an efficient method of ensuring a work of power electronic devices in conditions of micro-miniaturization.
Journal of the Korean Society of Environmental Restoration Technology
/
v.17
no.5
/
pp.1-17
/
2014
Research was initiated to investigate early establishment characteristics and germination pattern of Kentucky bluegrass (KB, Poa pratensis L.) under natural room temperature and to analyze differences between alternative and natural conditions for a practical application. Fifteen cultivars of KB were evaluated in the study. Daily and cumulative germination pattern were measured and analyzed on a daily basis. Differences were observed in germination percentage, germination pattern, days to the first germination and days to 75% germination. Germination percentage was variable with cultivars at the end of study. It was 75.75 to 90.25% under natural condition. There were considerable variations in early germination characteristics and germination pattern among KB cultivars according to germination conditions. The first germination in all entries tested was initiated between 6 and 9 DAS (days after seeding) under ISTA (International Seed Testing Association) condition. But it was observed between 9 and 12 DAS under natural condition, being 3 to 5 days later as compared with ISTA condition. On the first date of a germinating process, the germination rate was 0.25% to 25.00% under ISTA condition, while 0.50% to 13.25% under natural condition. Days to the 75% germination were 15.08 to 28.80 DAS under ISTA condition and 17.78 to 28.75 DAS under natural condition. Midnight II, Excursion and Midnight were the fastest cultivars under ISTA condition, while Odyssey the fastest one under natural condition. Regardless of germination condition, the slowest cultivar was Voyager II, being over 4 weeks to 75% germination percentage. For the most cultivars, days to 75% germination under natural room temperature condition were 1 to 8 days slower than under ISTA condition. From this study information on differences in germination characteristics and pattern among cultivars would be usefully applied for KB establishment such as golf course construction. Prior to on-site seeding, a comprehensive germination test is practically recommended due to a possible decline in germination capability during domestic distribution and storage after import.
Guenot-Delahaie, Isabelle;Sercombe, Jerome;Helfer, Thomas;Goldbronn, Patrick;Federici, Eric;Jolu, Thomas Le;Parrot, Aurore;Delafoy, Christine;Bernaudat, Christian
Nuclear Engineering and Technology
/
v.50
no.2
/
pp.268-279
/
2018
The ALCYONE multidimensional fuel performance code codeveloped by the CEA, EDF, and AREVA NP within the PLEIADES software environment models the behavior of fuel rods during irradiation in commercial pressurized water reactors (PWRs), power ramps in experimental reactors, or accidental conditions such as loss of coolant accidents or reactivity-initiated accidents (RIAs). As regards the latter case of transient in particular, ALCYONE is intended to predictively simulate the response of a fuel rod by taking account of mechanisms in a way that models the physics as closely as possible, encompassing all possible stages of the transient as well as various fuel/cladding material types and irradiation conditions of interest. On the way to complying with these objectives, ALCYONE development and validation shall include tests on $PWR-UO_2$ fuel rods with advanced claddings such as M5(R) under "low pressure-low temperature" or "high pressure-high temperature" water coolant conditions. This article first presents ALCYONE V1.4 RIA-related features and modeling. It especially focuses on recent developments dedicated on the one hand to nonsteady water heat and mass transport and on the other hand to the modeling of grain boundary cracking-induced fission gas release and swelling. This article then compares some simulations of RIA transients performed on $UO_2$-M5(R) fuel rods in flowing sodium or stagnant water coolant conditions to the relevant experimental results gained from tests performed in either the French CABRI or the Japanese NSRR nuclear transient reactor facilities. It shows in particular to what extent ALCYONE-starting from base irradiation conditions it itself computes-is currently able to handle both the first stage of the transient, namely the pellet-cladding mechanical interaction phase, and the second stage of the transient, should a boiling crisis occur. Areas of improvement are finally discussed with a view to simulating and analyzing further tests to be performed under prototypical PWR conditions within the CABRI International Program. M5(R) is a trademark or a registered trademark of AREVA NP in the USA or other countries.
It is recognized that alternative fuel such as dimethyl ether (DME) has better combustion polluting characteristics than diesel fuel, even though the cetane number of DME is almost the same as that of diesel. Characteristics of DME spray were observed experimentally under various ambient conditions using a constant volume chamber and a common-rail injection system. N-dodecane and LPG fuel sprays were also observed under same conditions of DME spray. Using spray images from backlight scattering and Mie scattering, characteristics of fuel sprays such as penetration and spray volume were visualized and quantitatively measured. The measurements showed that the penetration of early period decreased remarkably, because evaporation of alternative fuels became prosperous by the influence of flash boiling phenomenon under the condition of the low temperature and pressure compared with n-dodecane. The penetration of DME and LPG spray received the influence of temperature more largely in comparison with low density, because the specific surface area increased by atomizing in high density.
Transactions of the Korean Society of Mechanical Engineers B
/
v.28
no.10
/
pp.1172-1177
/
2004
The emission control of automobile has been intensified as a part of the countermeasure to decrease air pollution in the world. As the cars with an alternative fuel starts to get into the spotlight, the cars with low emission has been introduced and exhaust gas regulation forced in this country. These days, LPG vehicles, which infrastructure of fuel was already built up, and CNG vehicles are recognized for alternative fuel cars in this country. In this study, the constant volume combustion chamber was manufactured and used for experiments to obtain the combustion characteristics of propane mixture. The combustion characteristics was analyzed, with the change of supply conditions of propane fuel. Inside the combustion chamber, the maximum temperature increase with the initial pressure is going up. The burning velocity also seems to have the same characteristic as the temperature. However, the heat flux do not change much according to the theoretical correct mixture but it changes with the various initial temperature of the combustion chamber.
Most of the fossil power plants firing lower grade coals are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. The poor combustion conditions are directly related to the gas flow deviation in upper furnace and convection tube-bank but a less reported issue related to in large-scale oppose wall fired boilers. In order to develop a on-line combustion monitoring system and suggest an alternative heat flux estimation method at tube bank, which is very useful information for boiler design tool and blower optimizing system, field test was conducted at operating power boiler. During the field test the exhaust gases' temperature and tube metal temperature were monitored by using a spatially distributed sensors grid which located in the boiler's high temperature vestibule region. At these locations. the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. Test results showed that the flue gas monitoring method is more proper than metal temperature distribution monitoring for real time combustion monitoring because tube metal temp. distribution monitoring method is related to so many variables such as flue gas, internal flow unbalance, spray etc., Heat flux estimation at the tube bank with flue gas temp. and metal temp. data can be alternative method when tube drilling type sensor can't able to use.
Proceedings of the Korean Society of Propulsion Engineers Conference
/
2009.11a
/
pp.443-446
/
2009
In this study, a series of degradation test for structural adhesives was performed to investigate the possibility of replacement of the alternative adhesives to the conventional adhesives. Four types of the adhesives were exposed to combined environmental conditions over 1000 hours at an accelerated aging tester, which can simulate natural weather conditions such temperature, moisture and ultraviolet. Mechanical and chemical properties of the adhesives were evaluated through material testing system and FT/IR spectrometer. According to the results, the conventional adhesives can be replaced by the alternative adhesives because the alternative adhesives were more stable to environmental conditions rather than the conventional adhesives.
Journal of the Korean Society of Environmental Restoration Technology
/
v.11
no.5
/
pp.79-91
/
2008
Research was initiated to investigate germination characteristics of creeping bentgrass (CB, Agrostis palustris Huds.). Seven varieties of CB were evaluated with different experiments. An alternative environment condition requiring for a CB germination test by International Seed Testing Association (ISTA) was applied in the Experiment I, consisting of 8-hr light at $25^{\circ}C$ and 16-hr dark at $15^{\circ}C$(ISTA conditions). Experiment II was conducted under a room temperature condition of 5 to $25^{\circ}C$(natural conditions). In each experiment, data such as seed germinating vigor, early germination characteristics, germination speed and germination peak time were measured. Significant differences were observed in seed germinating vigor, early germination characteristics, germination speed and germination peak time. Seed germinating vigor was variable with different environments and varieties. It was 61.50 to 98.25% under ISTA conditions and 55.00 to 98.50% under natural conditions. There were considerable variations in early germination characteristics among CB varieties according to different conditions. Early germination characteristics indicated that all varieties were 1 to 4 days faster in germination under ISTA conditions, when compared with natural conditions. The germination speed, measured as days to seed germination of 70% and 90%, was much faster with Penn A-1, Penn A-4 and Penncross under ISTA conditions. But it was even faster with L-93 and Penncross when grown under natural conditions. Differences were also observed in germination peak time with varieties and growing conditions. It was 0.57 to 2.86 days under ISTA conditions and 0.74 to 1.74 days under natural conditions. Regardless of the environment conditions, the shortest variety was L-93 and the longest one T-1. Considering germinating vigor, early germination characteristics, germination speed and germination peak time, Penn A-1, Penn A-4 and Penncross were regarded as excellent varieties under ISTA conditions in terms of early establishment characteristics, while L-93, Penn A-1 and Penncross under natural conditions. These results suggest that an intensive germination test be needed prior to planting, for the early germinating vigor, germination speed and germination peak time. Also, a proper variety selection and comprehensive site analysis for the growing environmental conditions should be done before golf course construction.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.