• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.103-111
• /
• 2012

In this study, the full-scale laboratory model test on utilization of recycled aggregates and crushed stone as vertical drains to use an alternative material of sand in soft ground is performed. The settlement and pore water pressure were measured to evaluate the discharge capacity and filed application, and the results were compared and analyzed through the finite element method. The measured and estimated settlement in all vertical drain materials decreases gradually with the load increase. The measured settlement 6.55~8.63 mm, and the estimated by the Hyperbolic model was 7.45~7.92 mm. So the model used for the analysis can be applied to the settlement estimation of the actual field. The variations of pore water pressure with time showed constantly regardless of the load in all vertical drainage materials. The pore water pressure was similarity to that of sand after rapid drawdown. Therefore, it was applicable to the field because discharge capacity was enough to be an alternative material to the sand which had been being used as the vertical drains.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.483-488
• /
• 2021

With continuous emission of environmental pollutants and an increase in greenhouse gases such as carbon dioxide, demand to seek other types of energy sources, alternative energy, was needed. Hydrogen, an eco-friendly energy, is attracting attention as the ultimate alternative energy medium. Hydrogen storage technology has been studied diversely to utilize hydrogen energy. In this study, the gas behavior of hydrogen in the storage tank was numerically examined under charge conditions for the Tpe III hydrogen tank. Numerical results were compared with the experimental results to verify the numerical implementation. In the results of pressure and temperature values under charge condition, the Realizable k-ε model and Reynold stress model were quantitatively matched with the smallest error between numerical and experimental results.

• 에너지공학
• /
• 제18권4호
• /
• pp.230-238
• /
• 2009

우리나라는 에너지 절약 및 온실가스 배출저감 기술 중 하나로써 소형 열병합 발전과 소형 연료전지 열병합 발전을 연구해 왔으며 정책적으로 이를 보급하려고 한다. 기존의 석탄화력발전설비, 복합화력발전설비, 석유 화력발전설비를 열병합 발전설비로 대체하는 시나리오를 작성하여 에너지소비량과 온실가스 배출량의 변화추이를 에너지 경제 모델인 LEAP (Long-range Energy Alternative Planning system)을 이용하여 정량적으로 분석하였다. 2019년을 기준으로 열병합 발전설비를 석탄화력발전설비와 교체하였을 경우, 온실가스 배출량이 약 6.34%가 감소하였고 복합화력발전설비와 교체하였을 경우, 온실가스 배출량이 약 0.8%가 증가하였으나 열병합발전설비의 열생산량을 고려해주면 배출량이 감소하는 경향을 보일 것으로 사료된다. 석유화력발전설비를 열병합발전설비로 대체할 경우, 온실가스 배출량이 약 0.8% 감소할 것으로 예상된다.

• Communications for Statistical Applications and Methods
• /
• 제10권2호
• /
• pp.291-303
• /
• 2003

This work is proposed an alternative identification method of outlying cell which is one of important issues in categorical data analysis. One finds that there is a strong relationship between the location of an outlying cell and the corresponding parameter estimates of the well-fitted log-linear model. Among parameters of log-linear model, an outlying cell is affected by interaction terms rather than main effect terms. Hence one could identify an outlying cell by investigating of parameter estimates in an appropriate log-linear model.

• 응용통계연구
• /
• 제10권2호
• /
• pp.403-411
• /
• 1997

본 연구에서는 시스템을 지배하는 변수들에 대한 자료가 부정확하거나 애매모호한 경우에 통계적 회귀모형의 대안으로서 제안된 퍼지 회귀모형과 그 모수 추정을 살펴본다. 그리고 사례연구를 통하여 퍼지 회귀모형의 장단점을 이해하고 결과를 비교해본다.

• Communications for Statistical Applications and Methods
• /
• 제3권3호
• /
• pp.39-46
• /
• 1996

Most of existing nonparametric test statistics are based on the residuals which are obtained by regressing the data to a parametric model. In this paper we compare power of goodness-of-fit test statistics for testing the (null)parametric model versus the (alternative) nonparametric model.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.126-129
• /
• 1999

This paper presents a new averaged model for controlled on time boost power factor correction (PFC) circuit. The proposed model accurately predicts the average behavior of the PFC circuit, and offers a good alternative in studying the large signal dynamics of the circuit. The accuracy of the model is verified through both computer simulation and experiments.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.105-106
• /
• 2003

The spectral eddy viscosity model is investigated through the large eddy simulation of the decaying and forced isotropic turbulence. It is shown that the widely accepted 'plateau and cusp' model overpredicts resolved kinetic energy due to the amplification of energy at intermediate wavenumbers. Whereas, the simple plateau model reproduces a correct energy spectrum. This result overshadows a priori tests based on the filtered DNS or experimental data. An alternative method for the validation of subgrid-scale model is discussed.

• Journal of the Korean Statistical Society
• /
• 제30권4호
• /
• pp.645-660
• /
• 2001

In this paper we propose a goodness-of-fit test statistic for testing the (null) parametric model versus the (alternative) nonparametric model. Most of existing nonparametric test statistics are based on the residuals which are obtained by regressing the data to a parametric model. Our test is based on the bootstrap estimator of the probability that the smoothing parameter estimator is infinite when fitting residuals to cubic smoothing spline. Power performance of this test is investigated and is compared with many other tests. Illustrative examples based on real data sets are given.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.82-87
• /
• 1998

In order to provide a manufacturing system with efficiency and flexibility to cope with the changes in shop floor status, the integration of process planning and operations scheduling is required. In this paper, an integrated system of process planning and operations scheduling based on the concept of process net model and genetic algorithm is suggested. The process net model includes the alternative process plans. The integrated system is applied for prismatic parts.