• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.34-41
• /
• 2015

Bonding strength of a thermal sprayed coating is difficult to measure using a conventional pull-off test method. Scratch test is a potential alternative testing method. An adhesive and a cohesive bond strength of the coating can be measured by the pull-off test while the scratch test performed on the cross-section of the thermal sprayed coating can only demonstrate the cohesive bond strength of the coating. Nevertheless, it is still beneficial to perform the scratch testing on the cross-section of the coating for the sake of comparison thus providing an alternative to the pull-off test. The scratch test method can reduce testing time and cost in the long run due to a significant cost reduction in consumables and energy and time saving from the curing step of the glue used in the pull-off test. This research investigates the possibility of using the scratch test to measure the cohesive bond strength of Mo/NiCrBSi composite coating. The results from the pull-off test and the scratch test indicate that the cohesive bond strengths of the Mo composite coating show similar trend and that the cohesive bond strength are increased when increasing NiCrBSi content.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.152-153
• /
• 2013

Based on the Fire Service Act of mandatory provision, new buildings are strictly forced to use fire protection materials. Flame resistant EPS is one of those materials. Unlike conventional EPS that can be fused to make EPS ingot and be recycled for various purposes, flame resistant EPS waste cannot be recycled due to the presence of protective coating that is applied to increase the fire protection properties of EPS. A suitable alternative that can process large amount of flame resistant EPS wastes needs to be developed, and one of the possible alternative is to use them as construction materials. In this research, experiments were designed to observe whether the flame resistant EPS wastes can be utilized as partial replacements of fine aggregates in cement mortar. The replacement ratio of waste EPS was varied, and its effect on compressive strength and absorption capacity was investigated. According to the experimental results, both compressive strength and absorption capacity met the Korean Standard specification for cement bricks and blocks, indicating that flame resistant EPS wastes can be used for construction purposes.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.5
• /
• pp.103-111
• /
• 2012

In this study, the full-scale laboratory model test on utilization of recycled aggregates and crushed stone as vertical drains to use an alternative material of sand in soft ground is performed. The settlement and pore water pressure were measured to evaluate the discharge capacity and filed application, and the results were compared and analyzed through the finite element method. The measured and estimated settlement in all vertical drain materials decreases gradually with the load increase. The measured settlement 6.55~8.63 mm, and the estimated by the Hyperbolic model was 7.45~7.92 mm. So the model used for the analysis can be applied to the settlement estimation of the actual field. The variations of pore water pressure with time showed constantly regardless of the load in all vertical drainage materials. The pore water pressure was similarity to that of sand after rapid drawdown. Therefore, it was applicable to the field because discharge capacity was enough to be an alternative material to the sand which had been being used as the vertical drains.

• Korean Journal of Organic Agriculture
• /
• v.10 no.3
• /
• pp.67-77
• /
• 2002

This study was conducted to investigate an effects on ago-chemical alternative materials such as the wood vinegar, a lactic acid bacteria serum, the fermented plant juice, the brown rice vinegar and a Chitosan used for amount and qualities of fruits and to examine the pest protection efficiency for their uses in the apple and pear orchard farms. An apple yields in the orchard cultivated with using the ago-chemical alternative materials without appling the fertilizer and pesticides were decreased at 56% relative to the conventional farming practice method. Also, it was indicated that there was difficult to produce the fruits with marketability because the small sizes of fruits were produced. For the quality of fruits, the brix of apple produced in the orchard cultivated with using the ago-chemical alternative materials was similar, but Vitamin C content was greater than that of the conventional farming practice method. As a results of treating with the wood vinegar, a lactic acid bacteria serum, the fermented plant juice, the brown rice vinegar and a Chitosan instead of applying pesticides, the fruit disease in the Chitosan treatment was a little decreased, but was great occurred in the other treatments compared with the conventional farming practice mehod. However, it observed that brix and Vitamin C content of apple produced in the Chitosan, brown rice vinegar, fermented plan juice and fish amino acid treatments and in the Chitosan, brown rice vinegar, charcoal power and peat moss treatments were greater than those of the conventional farming practice method, respectively. Over all, it considered that there was very difficult to manage the orchard depended on the ago-chemical alternative materials without appling the chemical fertilizer and pesticides in the apple orchard, but it might be proper to use the ago-chemical alternative materials as an auxiliary means to decrease the appling amount of chemical fertilizer and pesticides. Furthermore, the general effects on the ago-chemical alternative materials to the perennial fruits should be investigated with considering the changes of soil fertility, soil microbial status and natural enemy creatures after treating them for a long time.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.299-309
• /
• 2014

HSA800 is a new high strength steel (HSS) plate for building structures developed by POSCO and RIST in 2011. It has upper and lower bounds for yield ($F_y$) and tensile ($F_u$) strength as of 650-770MPa and 800-950MPa, respectively, with yield ratio ($F_y/F_u$) limit as of 0.85 which make steel quality more reliable and enhance the seismic resistance of structures. As made by TMCP, it has a good weldability without increasing carbon percentage. The objective of this study is to provide alternative design of mega-structural members of the Lotte World Tower (555m, 123 story), a first super-tall building in Korea, using HSS considering structural safety, constructability, and cost-effectiveness. Steel outrigger trusses, belt-trusses and steel exterior columns were selected and analyzed to evaluate the structural performance between original and alternative designs using HSS. The results show that HSS can be applied to the members which do not affect lateral stiffness of a building and, in this study, approximately 1100tons of steel were saved. It implies that HSS can save overall construction costs - manufacturing, delivery, and erection costs - by reducing mega structural member size. HSA800 was very first applied to the Lotte World Tower based on the results of this study.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.2
• /
• pp.89-92
• /
• 2012

PURPOSE. Adequate passive-fitting of one-piece cast 3-element implant-supported frameworks is hard to achieve. This short communication aims to present an alternative method for section of one-piece cast frameworks and for casting implant-supported frameworks. MATERIALS AND METHODS. Three-unit implant-supported nickel-chromium (Ni-Cr) frameworks were tested for vertical misfit (n = 6). The frameworks were cast as one-piece (Group A) and later transversally sectioned through a diagonal axis (Group B) and compared to frameworks that were cast diagonally separated (Group C). All separated frameworks were laser welded. Only one side of the frameworks was screwed. RESULTS. The results on the tightened side were significantly lower in Group C ($6.43{\pm}3.24{\mu}m$) when compared to Groups A ($16.50{\pm}7.55{\mu}m$) and B ($16.27{\pm}1.71{\mu}m$) ($P$ <.05). On the opposite side, the diagonal section of the one-piece castings for laser welding showed significant improvement in the levels of misfit of the frameworks (Group A, $58.66{\pm}14.30{\mu}m$; Group B, $39.48{\pm}12.03{\mu}m$; Group C, $23.13{\pm}8.24{\mu}m$) ($P$ <.05). CONCLUSION. Casting diagonally sectioned frameworks lowers the misfit levels. Lower misfit levels for the frameworks can be achieved by diagonally sectioning one-piece frameworks.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.2
• /
• pp.58-65
• /
• 2021

As increasing social needs of pavement maintenance, pattern frame method has been constructed in Korea. The pattern frame not only increases the skid resistance of pavements but also improve the scenery. However, construction of the pattern frame currently relies on imported materials. In this paper, we localize the materials used in pattern frame and conduct performance verification on them. The important performance indicators are the adhesion strength of undercoating materials and the skid resistance of finished pattern frames. The adhesion strength was targeted at 1.4MPa, and the localization alternative material met the target performance with 2.35MPa, the skid resistance performance was targeted at 40BPN, and the localization alternative material met the target performance with 75BPN. In the case of localized materials, approximately 40% cost reduction (per 1m²)compared to imported materials was confirmed.

• Korean Journal of Adult Nursing
• /
• v.15 no.1
• /
• pp.116-125
• /
• 2003

Purpose: This study was to evaluate the importance of liver cancer patient's diet and to provide guideline materials for proper nursing intervention. Method: The hermeneutic phenomenological method of van Manen was applied for the in-depth interview of liver cancer patients and the cultural background studies including linguistic, literary and art works to enhance the insight and understanding, from which the meaning of the cognition and lesson of the experiences were extracted. The participants for this study were five male patients, who had been diagnosed with liver cancer, 5-15 years ago and had been treated with Transcatheter Arterial Embolization without chemotherapy. The repeated interview and close observation were carried out for nine months starting from January 2001 in Seoul, Korea. Result: Eight essential themes were emerged ; (1) confliction(frustration) with hospital treatment (2) trial of every possible remedies (3) liking unpolluted natural foods(4) faithful tolerance (5) experiencing diet effectiveness (6) discovering personal control methods (7) deepen their faith in God (8) searching for healthy new life. Conclusion: The alternative diet therapy influenced their life beyond the physical overcoming of cancer toward psychological and spiritual healing. The study evidenced the necessity for scientific research and education on the effectiveness and application of complementary and alternative diet therapy for the treatment of cancer in hospital practices.

• Korean Institute of Interior Design Journal
• /
• v.14 no.6 s.53
• /
• pp.228-235
• /
• 2005

This study analyzes the new possibility of design through the research for the expression of cladding design architectural materials, and applies to connection with creative design concept. In these modern days, architectural materials became the subject of expression as itself thanks to the development of new technology and materials. The physical properties of materials and their beauty value made possible the variety and possibility of expression in space design. The expressional properties of materials can lead mutual communication between commodity and brand by association, presenting brand image and the distinction of its value. Therefore, the trends of designed material expression in space design according to modern aspect can offer the possibility of material space design for ahead. This study suggest an alternative idea for revitalizing design by materials.

• International Journal of Automotive Technology
• /
• v.7 no.5
• /
• pp.565-570
• /
• 2006

The development of a light-weight vehicle is in great demand for enhancement of fule efficiency and dynamic performance. The vehicle weight can be reduced effectively by using lightweight materials such as aluminum and magnesium. However, if such materials are used in vehicles, there are often instances when different materials such as aluminum and steel need to be joined to each other. The conventional joining method, namely resistance spot welding, cannot be used in joining different materials. Self-piercing rivet(SPR) and adhesive bonding, however, are good alternatives to resistance spot welding. This paper is concerned with the crushing test of double hat-shaped member made by resistance spot welding, SPR and adhesive bonding. Various parameters of crashworthiness are analyzed and evaluated. Based on these results, the applicability of SPR and adhesive bonding are proposed as an alternative to resistance spot welding.