The purpose of this study is to suggest structural model and analyze design factors for the development of small greenhouse standardization model. The average dimensions of small greenhouse desired by urban farmers were 3.3m in width, 1.9m in eaves height, 2.7m in ridge height, 5.7m in length. The cladding materials for small greenhouse were preferred to glass, PC board and plastic film, framework to aluminum alloy and steel, and heating method in electrical energy. In addition, it was analyzed that small greenhouses need to develop structural model by dividing them into entry-level type and high-level type. The roof type that was used for entry-level type was arch shape, framework was steel pipe, cladding material was plastic film. On the other hand, high-level type was used in even span or dutch light type, framework with square hollow steel, cladding materials with glass or PC board. In consideration of these findings and practicality, this study developed four types of small greenhouses. The width, eaves height, ridges height, and length of the small greenhouses of even span type, which were covered with 5mm thick glass and 6mm thick PC board were 3m, 2.2m, 2.9m, and 6m, respectively. The small greenhouse of dutch light type covered with 5mm thick glass was designed with 3.8m in with, 2.2m in eaves height, 2.9m in ridges height, and 6m in length. The width, eaves height, ridges height, and length of the arch shape small greenhouse covered with a 0.15mm PO film were 3m, 1.5m, 2.8m, and 6m, respectively.
The effect of carbon addition on the microstructures and mechanical properties of $Ni_3Al$ and TiAl intermetallic alloys have been characterized. It is shown that carbon is not only an efficient solid solution strengthener in $Ni_3Al$ and TiAl, it is also an efficient precipitation strengthener by fine dispersion of carbide. Transmission electron microscope investigation has been performed on the particle-dislocation interactions in $Ni_3Al$ and TiAl intermetallics containing various types of fine precipitates. In an $L1_2$-ordered $Ni_3Al$ alloy with 4 mol.% of chromium and 0.2~3.0 mol.% of carbon, fine octahedral precipitates of $M_{23}C_6$ type carbide, which has the cube-cube orientation relationship with the matrix, appear during aging. Typical Orowan loops are formed in $Ni_3Al$ containing fine dispersions of $M_{23}C_6$ particles. In the L10-ordered TiAl containing 0.1~2.0 mol.% carbon, TEM observations revealed that needle-like precipitates, which lie only in one direction parallel to the [001] axis of the $L1_0$ matrix, appear in the matrix and preferentially at dislocations. Selected area electron diffraction (SAED) patterns analyses have shown that the needle-shaped precipitate is $Ti_3AlC$ of perovskite type. The orientation relationship between the $Ti_3AlC$ and the $L1_0$ matrix is found to be $(001)_{Ti3AlC}//(001)_{L10\;matrix}$ and $[010]_{Ti3AlC}//[010]_{L10\;matrix}$. By aging at higher temperatures or for longer period at 1073 K, plate-like precipitates of $Ti_2AlC$ with a hexagonal structure are formed on the {111} planes of the $L1_0$ matrix. The orientation relationship between the $(0001)_{Ti2AlC}//(111)_{L10\;matrix}$ is and $[1120]_{Ti2AlC}//[101]_{L10\;matrix}$. High temperature strength of TiAl increases appreciably by the precipitation of fine carbide. Dislocations bypass the carbide needles at further higher temperatures.
We investigated the effects of Al and Mg on the microstructure and hardness of the coating layer of galvanized steel sheets, by thermodynamic calculations, X-ray diffraction, scanning electron microscopy, and Vickers hardness tests of Zn-0.2Al, Zn-6Al-2Mg, and Zn-10Al-5Mg coating layers. Regardless of the alloy composition of the galvanizing bath, a Fe-Al layer was observed between the coating layer and steel sheet. The Zn-0.2Al coating layer consists of major h.c.p. Zn phase and minor f.c.c. Al phase. The fraction of f.c.c. Al phase (containing a significant amount of Zn) of the coating layer increases with increasing the chemical composition of Al of the galvanizing bath. The h.c.p. MgZn2 phase was formed in the Al/Mg-containing Zn-6Al-2Mg and Zn-10Al-5Mg coating layers, forming Zn-Al-MgZn2 eutectic microstructure. The primary MgZn2 phase was additionally formed in the Zn-10Al-5Mg coating layers containing high concentrations of Al and Mg. The Vickers hardness values of Zn-0.2Al, Zn-6Al-2Mg, and Zn-10Al-5Mg coating layers were 59.1 ± 1.2 HV, 161.2 ± 5.7 HV, and 215.5 ± 40.3 HV, respectively. The addition of Al and Mg increased the hardness of the coating layer by increasing the fraction of the Al phase (containing Zn) and MgZn2 intermetallic compound, which were harder than the Zn phase.
본 논문에서는 편종의 조율 방안을 모색하기 위하여 유물 편종과 현대 편종의 음향 스펙트럼을 비교분석하였다. 유물 편종은 세종대왕기념관에서 소장하고 있는 편종을, 현대 편종은 국립국악원에서 연주되는 편종을 사용하였다. 음향 스펙트럼과 TV 홀로그래피를 이용한 모드분석을 통해 현대 편종의 모드진동수와 모드형상을 파악하였다. 유물 편종의 경우는 음향 스펙트럼 분석만 하였다. 각각의 음고에 해당하는 현대 종과 유물 종의 기명진동수는 9.8 센트부터 203 센트까지 차이를 나타냈다. 유물 편종의 조율 상태가 양호하지 못한 점, 현대 국악에서 기준 황종음고를 서양의 C4로 정하는 경향 등을 그 차이의 원인으로 해석할 수 있다. 편종의 음색을 결정하는 고차 모드진동수의 기명진동수에 대한 상대적인 비율을 조사한 결과, (3,0)a와 (3,0)b모드를 제외한 모든 고차 모드진동수에서 유의미한 차이를 나타냈다. 이 차이는 통계적으로 유의미할 뿐만 아니라 최소가지진동수 이상이었다 이것은 유물 편종과 현대 편종 사이에 음색의 차이가 있음을 시사한다. 조율방안을 모색하기 위해서는 보다 많은 유물 편종에 대한 추가적인 음향 분석, 주물 분석 및 구조에 대한 연구가 필요하다.
Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.
Samples of anodic oxide film used in semiconductor and display manufacturing processes were prepared at different electrolyte temperatures to investigate the corrosion resistance. The anodic oxide film was grown on aluminum alloy 6061 by using a sulfuric acid ($H_2SO_4$) electrolyte of 1.5 M at $0^{\circ}C$, $5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, and $20^{\circ}C$. The insulating properties of the samples were evaluated by measuring the breakdown voltage, which gradually increased from 0.43 kV ($0^{\circ}C$) to 0.52 kV ($5^{\circ}C$), 1.02 kV ($10^{\circ}C$), and 1.46 kV ($15^{\circ}C$) as the electrolyte temperature was increased from $0^{\circ}C$ to $15^{\circ}C$, but then decreased to 1.24 kV ($20^{\circ}C$). To evaluate the erosion of the film by fluorine plasma, the plasma erosion and the contamination particles were measured. The plasma erosion was evaluated by measuring the breakdown voltage after exposing the film to $CF_4/O_2/Ar$ and $NF_3/O_2/Ar$ plasmas. With exposure to $CF_4/O_2/Ar$ plasma, the breakdown voltage of the film slightly decreased at $0^{\circ}C$, by 0.41 kV; however, the breakdown voltage significantly decreased at $20^{\circ}C$, by 0.83 kV. With exposure to $NF_3/O_2/Ar$ plasma, the breakdown voltage of the film slightly decreased at $0^{\circ}C$, by 0.38 kV; however, the breakdown voltage significantly decreased at $20^{\circ}C$, by 0. 77 kV. In addition, for the entire temperature range, the breakdown voltage decreased more when sample was exposed to $NF_3/O_2/Ar$ plasma than to $CF_4/O_2/Ar$ plasma. The decrease of the breakdown voltage was lower in the anodic oxide film samples that were grown slowly at lower temperatures. The rate of breakdown voltage decrease after exposure to fluorine plasma was highest at $20^{\circ}C$, indicating that the anodic oxide film was most vulnerable to erosion by fluorine plasma at that temperature. Contamination particles generated by exposure to the $CF_4/O_2/Ar$ and $NF_3/O_2/Ar$ plasmas were measured on a real-time basis. The number of contamination particles generated after the exposure to the respective plasmas was lower at $5^{\circ}C$ and higher at $0^{\circ}C$. In particular, for the entire temperature range, about five times more contamination particles were generated with exposure to $NF_3/O_2/Ar$ plasma than for exposure to $CF_4/O_2/Ar$ plasma. Observation of the surface of the anodic oxide film showed that the pore size and density of the non-treated film sample increased with the increase of the temperature. The change of the surface after exposure to fluorine plasma was greatest at $0^{\circ}C$. The generation of contamination particles by fluorine plasma exposure for the anodic oxide film prepared in the present study was different from that of previous aluminum anodic oxide films.
Ar/Ar-$H_{2}$ 플라즈마법으로 V, Ta, B산화물과 금속의 환원 및 정련을 행하였다. 다시말해 Ar 플라즈마에서의 고온환원반응 및 Ar-(20%)$H_{2}$ 플라즈마에서의 정련 반응에 대한 연구를 각각 수행하였다. Ar 플라즈마 환원에 의하여 $C/V_{2}O_{5}$=4.50의 비에서 순도 96wt%의 조금속 Vdmf 얻었고, 바나듐 산화물의 열분해에 의한 $O_{2}$의 손실로 인해 $C/V_{2}O_{5}$=4.50에서 최대환원도가 얻어졌다. Ar-(20%)$H_{2}$ 플라즈마 정련에서는 $C/V_{2}O_{5}$=4.40의 비에서 99.2wt%의 금속 V을 얻었고, 주된 정련반응은 잔류탄소와 잔류산소의 반응으로 판단된다. 금속 Ta은 Ar 플라즈마 환원에 의하여 $C/Ta_{2}O_{5}$=5.10의 비에서 99.8wt%가 얻어졌고, $Ta_{2}O_{5}$의 열분해에 의한 $O_{2}$ 손실은 발생하지 않았다. Ar-(20%)$H_{2}$ 플라즈마 정련시 탈산반응이 탈탄반응보다 현저했으며, $C/Ta_{2}O_{5}$비가 4.50-5.10의 범위에서 99.9wt%의 금속 Ta을 제조하였다. 이 비에서는 탈산반응에 의한 잔류산소의 감소로 Ta외 Vickers 경도가 약 220Hv였다. 한편, Ar 및 Ar-$H_{2}$ 플라즈마에 의한 $B_{2}O_{3}$의 환원에는 C이 환원제로서 적합하지 않았으나, Fe원 소재와 C, $B_{2}O_{3}$ 및 페로보론을 고주파 유도 용해하였을 때 용강중에서의 $B_{2}O_{3}$의 환원으로 Fe-B-Si 합금을 얻었다.
본고에서는 더부골 고분군 출토 청동용기 27점에 대한 미세조직과 성분분석을 통해 고려 말 민간에서 사용된 청동용기의 제작방법과 기술체계의 변화를 살펴보았다. 본 연구대상 청동용기는 합금조성과 제작공정을 고려하여 네 가지 형식으로 나눌 수 있는데 1) 구리-주석(22% 정도) 합금을 이용한 주조${\rightarrow}$고온단조${\rightarrow}$담금질, 2) 구리-주석(10% 이하)-납 합금을 이용한 주조${\rightarrow}$서냉, 3) 구리-주석(10~20%)-납 합금을 이용한 주조${\rightarrow}$담금질, 4) 구리-주석(10~20%)-납 합금을 이용한 주조${\rightarrow}$고온단조${\rightarrow}$담금질이 있다. 청동용기의 제작방법과 기술체계의 연구에 있어서 합금조성과 제작공정은 중요한 부분을 차지한다는 것이 본고에서 확인되었다. 합금조성에 있어서 납의 첨가는 담금질 처리온도, 불순개재물의 차이, 청동용기의 표면색상에 영향을 미친 것으로 판단된다. 담금질 처리는 납을 첨가한 경우 $586{\sim}520^{\circ}C$에서 실시되었고, 납을 포함하지 않은 경우 $799{\sim}586^{\circ}C$에서 수행되었다. 미세조직 내에 존재하는 불순개재물에서도 합금재료로서 납의 첨가 유무에 따라 셀레늄의 존재 유무가 나타났는데 이는 구리-주석(22% 정도) 합금의 경우 구리제련과정에서 이미 납이 포함되지 않은 구리광석을 사용했을 가능성을 제시한다. 또한 청동용기가 매장환경하에서 부식될 때 합금재료로서 납의 첨가 여부로 인해 표면색 차이가 나타나는 것으로 밝혀졌는데. 합금 조성에 따른 표면 색상분석에서 납이 첨가되면 청동용기의 표면색이 연녹색 또는 암녹색을 띠었고, 그렇지 않은 경우에는 암갈색 또는 검은색을 띠는 것으로 확인되었다. 제작공정에 있어서는 담금질 처리 유무에 따라 청동용기의 두께 차이가 나타났는데 주조 후 서냉시켜 만든 용기의 두께는 1mm 이상이었지만 담금질 과정이 포함된 용기의 두께는 대부분 1mm 이하였다. 제작공정은 사회적 분위기도 반영하는데, 고려 말 동과 숙련된 장인이 부족했지만 청동용기의 수요가 증가하면서 비싼 주석 대신 납을 사용하고, 고온에서 형태 가공을 하지 않고 짧은 시간에 대량으로 만들 수 있는 방법을 선택한 것으로 추정된다. 이번 연구결과는 고려시대 장인들이 여러 가지 합금비율에 따른 다양한 제작기법을 사용한 기술혁신으로 부족한 원료상황을 극복했다는 것을 보여준다. 최근 들어 많은 양의 청동용기들이 발굴 조사되고 있다. 본 연구는 적절한 분석방법을 통해 관련 기술 특성에 대한 지식뿐만 아니라 그러한 기술체계가 확립될 수밖에 없었던 사회적 배경에 대한 중요한 자료로 판단된다.
동아대학교 석당박물관 소장 지자총통은 조선 중기에 사용하던 전장유통식 중화기무기로 천자총통 다음으로 큰 화기류이다. 지자총통의 표면에는 표면 이물질들로 인해 고유의 색상이 가려져 있는 상태로, 보존처리가 필요한 상황으로 판단되었다. 안정적인 보존처리를 위해 감마선(γ선), X선 비파괴 투과조사, 내시경카메라 관찰을 실시하여 내부 구조와 보존상태를 파악하였고, p-XRF 성분분석, SEM-EDS 성분분석, XRD 분석 등을 활용하여 지자총통의 재질 성분과 표면 오염물 등에 관한 성분분석을 진행하였다. 휴대용현미경 관찰과 정밀 3D스캔으로 지자총통 표면 명문의 상태, 새김형태 등을 확인하였다. 감마선, X선 비파괴 투과조사 결과, 지자총통 내부에 다량의 기포가 관찰되었으며, 육안관찰로 확인되는 표면의 채플릿은 비파괴투과조사 결과로는 확인되지 않았다. p-XRF 성분분석 결과 지자총통은 구리(Cu), 주석(Sn), 납(Pb) 합금으로 만들어진 청동으로 확인되었으며, SEM-EDS를 활용한 표면 이물질 성분분석 결과, 백색이물질은 칼슘(Ca), 황(S), 티타늄(Ti)이 주성분으로 확인되었다. 티타늄은 백색수정액의 주성분인 이산화티타늄(TiO2)으로 추정되었으며, 적색이물질은 바륨(Ba)이 주성분으로 확인되어 페인트의 체질안료인 황산바륨(BaSO4)으로 추정되었다. 티타늄과 바륨을 주성분으로 하는 백색과 적색 오염물은 근래에 이르러 표면에 묻은 것으로 추정된다. 황색이물질은 알루미늄(Al), 규소(Si)로 확인되어 토양성분에서 유래한 것으로 추정했다. 백색이물질의 XRD 성분분석결과 황화칼슘(CaS)으로 확인되었고, SEM-EDS와 XRD 성분분석결과로 백색이물질은 석고(CaS)로 확인하였다. 성분분석의 결과를 토대로 표면 이물질 제거, 안정화처리, 강화처리를 진행하였다. 보존처리를 진행하던 중에 휴대용 현미경과 정밀 3D스캔을 통해 알려지지 않았던 명문 우(右), 병(兵), 상(上), 이(二)를 발견하였다. 또한, 명문의 새김방법과 깊이, 너비 등을 측정하였다. 우병상(右兵上)은 창원 합포성 내 위쪽이며, 이(二)는 두 번째 돈대로 파악할 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.