• Korean Journal of Human Ecology
• /
• v.19 no.4
• /
• pp.667-674
• /
• 2010

This study evaluated the convenience and heating performance of 4 heated vests on the market through a trial of the vests. Participants were four healthy men who wore the garments outside in cold temperatures typical of the garments' real conditions of use. As the results, all the participants preferred the product, having an easily operable controller in ergonomic aspects and the good insulation for keeping the body temperature. The heating performance of vests was the most important factor in selecting the best product in this test. Indeed, the vests themselves found not to be sufficiently warm in the experimental condition. Thus, heated vests with the enhanced heating performance should be developed so that temperatures in the allowed range can be safely accessed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.327-330
• /
• 1998

The stability of the properties of magnetite particles in novel medicinal magnetic ointments of multipurpose application was examined by Mossbauer spectroscopy. Comparative analysis of the results obtained by model fitting of $\^$57/Fe nuclei spectra with those known for the system Fe$_3$O$_4$-${\gamma}$-Fe$_2$O$_3$ allowed to identify the phase composition of the particles. This composition, as well as that of the initial pure component in the form of a highly dispersed fraction (∼ 100${\AA}$), differs noticeably from the stoichiometric one. Despite their small sizes, the particles exhibit no superparamagnetism ( in the temperature range from 95 to 300k ). Radiative sterilization of the ointments has no effect on the magnetic component composition.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.49-53
• /
• 2009

If you are installing communications cables in the pipeline based on the kind of cable installation tension within the allowed range of the tension must be maintained. The tension of the installation affected by the cable types, cable jacketed status, cross-sectional shape of the pipeline, the substance present in the pipeline, pipeline linear, the direction of the cable is installed. Depending on the size of the cable installation tension fatal influence on the quality of communication, or, at worst, the cable can be cut. In this paper, test bed for building a pipeline and using optical cable and such cable tension was measured. Freedom of access to the pipeline used in the experiment, and installed in conjunction with the cable tension was measured. It possible for the cable installation to determine whether a duplicate, and have compared the actual measured tension value and the theoretical expression.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.629-630
• /
• 2010

Radio frequency identification (RFID) tags are cheap, simple devices that can store unique identification information and perform simple computation to keep better inventory of packages. Because of this, they are intended to replace the barcodes for supply chain management in the near future. However, unlike barcodes, these tags have a longer range in which they are allowed to be scanned, subjecting them to unauthorized scanning by malicious readers and to various attacks. Therefore, a security protocol for RFID tags is needed to ensure privacy and authentication between each tag and their reader. In order to accomplish this, in this paper, we proposed a lightweight privacy and authentication protocol for passive RFID tags.

• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.107-116
• /
• 1994

In the manufacturing of VLSI circuits, variations of device characteristics due to the slight differences in process parameters drastically aggravate the performances of fabricated devices. Therefore, it is very important to establish optimal process conditions in order to minimize deviations of device characteristics. In this paper, we used one-dimensional process simulator, SUPREM-II, and two dimensional device simulator, MINIMOS 4.0 in order to extract optimal process parameter which can minimize changes of the device characteristics caused by process parameter variation in the case of short channel nMOSFET and pMOSFET device. From this simulation, we have derived the dependence relations between process parameters and device characteristics. Here, we have suggested a method to extract process parameters from design trend curve(DTC) obtained by these dependence relations. And we have discussed short channel effects and device limitations by scaling down MOSFET dimensions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.7
• /
• pp.981-986
• /
• 2009

The application of a cryogenic storage system is growing fast in different kinds of fields including to keep umbilical cord blood. Umbilical cord blood stem plays an important role in the treatment of a blood and immune system related genetic diseases, cancers and blood disorders. This study gives the optimal cryogenic system for cord blood banking. Three-dimensional models are employed and finite element method is used to do structure analyses of all designed models. The results shows model 3 have a good structure properties, and model 4 shows the best structure property as its maximum is 92.9 MPa. The other is too dangerous or infeasible to support load condition that allowed by STS 304. The results can be used in the design of these kinds of systems to obtain good predictions of trends over a wide range of design alternatives and operating conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.628-632
• /
• 2001

Experimental approach was investigated to improve gear rattle noise of a small car. During the development of a small car serious problem occurred inside the transmission gear units. The transmission was a carried over system from a less powered predecessor. Several components of suspicion were investigated, and applied to reduce rattle noise. In general, backlash, the assembly gaps, and the clutch disk rattle induce gear rattle noise. Above mentioned improvements were applied to reduce the noise, but still problem remained. Meanwhile, the temperature inside the gearbox was reported to be unusually high and the life of transmission oil quality deteriorated drastically, Temperature increment caused the large gap between the bearing outer diameter and the transmission housing. Large gap made the gear shaft assembly move intermittently and impact each other. The tighter control of the assembly gap allowed the rotating shafts smoothly and reduced the gear rattle noise even in the high temperature range.

• Journal of Agricultural Extension & Community Development
• /
• v.12 no.1
• /
• pp.57-68
• /
• 2005

Since about 2000. local government has started making ordinance related to the rural development planning which is revitalizing rural area through using rural resource. But, the ordinance of local government have not any contents relating to the land use planning system that is necessary in rural development planning. According to the present local autonomy act, ordinance can not have any regulations restricting basic human right without being allowed by law. In recent, central government is considering to hand power making land use planning system over local government. This paper is to study how to expand the legislative power of local government. This study discussed on logical bases through examining disputes on legal theories, the nature of local ordinance, range of local autonomy affairs and cases of local ordinance.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.420-423
• /
• 2010

We fabricated 1 mm-thick periodically-poled lithium niobate (PPLN) crystals by using a high-voltage amplifier for standard electric field poling combined with a voltage multiplier. Furthermore, two 1 mm-thick PPLNs were directly bonded to make a 2 mm-thick PPLN. The large aperture allowed broad angular tuning, and a broad spectral range of quasi-phase matched second-harmonic generation can be achieved in a single channel. High-power applications are also expected.

• Clinics in Shoulder and Elbow
• /
• v.6 no.1
• /
• pp.80-84
• /
• 2003

We report a patient with an anterior dislocation of the shoulder with uncommon bucket handle type fracture of the anterior glenoid fossa with intact glenoid labrum. The fracture fragment was displaced into the posterior aspect of the glenohumeral joint resulting in prevention of reduction of the shoulder. Excellent fixation was obtained with suture anchors and bioabsorbable interfragmentary screws. This allowed stable range of motion exercises, optimizing the patient's functional outcome.