• Title/Summary/Keyword: Allowed Range

Search Result 325, Processing Time 0.032 seconds

Optimal cross-section and configuration design of cyclic loaded elastic-plastic structures

  • Valido, Anibal J.;Sousa, Luis G.;Cardoso, J. Barradas
    • Structural Engineering and Mechanics
    • /
    • v.4 no.1
    • /
    • pp.25-35
    • /
    • 1996
  • This paper describes a continuum variational formulation for design optimization of nonlinear structures in the elastic-plastic domain, where unloading and reloading of the structures are allowed to occur. The Total Lagrangian procedure is used for the description of the structural deformation. The direct differentiation approach is used to derive the sensitivities of the various structural response measures with respect to the design parameters. Since the material goes into the inelastic range and unloading and reloading of the structure are allowed to occur, the structural response is path dependent and an additional step is needed to integrate the constitutive equations. It can be shown, consequently, that design sensitivity analysis is also path-dependent. The theory has been discretized by the finite element technique and implemented in a structural analysis code. Mathematical programming approach is used for the optimization process. Numerical applications on trusses are performed, where cross-sectional areas and nodal point coordinates are treated as design variables. Optimal designs have been obtained and compared by using two different strategies: a two level strategy where the levels are defined accordingly the type of design variables, cross sectional areas or node coordinates, and optimizing simultaneously with respect to both types of design variables.

Mercury recovery from aqueous solutions by polymer-enhanced ultrafiltration using a sulfate derivative of chitosan

  • Carreon, Jose;Saucedo, Imelda;Navarro, Ricardo;Maldonado, Maria;Guerra, Ricardo;Guibal, Eric
    • Membrane and Water Treatment
    • /
    • v.1 no.4
    • /
    • pp.231-251
    • /
    • 2010
  • The sulfatation of chitosan, by reaction with chlorosulfonic acid under controlled conditions, allowed increasing the pH range of chitosan solubility. The biopolymer was characterized using FTIR and $^{13}C$-NMR spectroscopy, elemental analysis and titration analysis and it was tested for mercury recovery by polymer enhanced ultrafiltration (PEUF). In slightly alkaline conditions (i.e., pH 8) mercury recovery was possible and at saturation of the polymer the molar ratio $-NH_2$/Hg(II) tended to 2.6. Polymer recycling was possible changing the pH to 2 and the polymer was reused for 3 cycles maintaining high metal recovery. The presence of chloride ions influences metal speciation and affinity for the polymer and "playing" with metal speciation allowed using the PEUF process for mercury separation from cadmium; at pH 11 the formation of hydroxo-complexes of Hg(II) limits it retention. Cake formation reveals the predominant controlling step for permeation flux.

Study on Fluid Inclusion and Genetic Modelling of Pegmatites at the Maewol Feldspar Mine (매월장석광산(梅月長石鑛山)의 페그마타이트내(內) 유체포유물(流體包有物)과 그 성인(成因)에 관한 모델 연구)

  • Moon, Kun Joo
    • Economic and Environmental Geology
    • /
    • v.21 no.4
    • /
    • pp.381-387
    • /
    • 1988
  • Maewol Feldspar Mine produces feldspar ore from pegmatites. K-Rb Age of muscovite is 137.7Ma. Fluid inclusions in quartz crystal of the pegmatite show bimodal distribution of homogenization temperatures. The high homogenization temperatures range from 290 to $302^{\circ}C$ while low homogenization temperatures range from 157 to $195^{\circ}C$. Three phases liquid $CO_2$ bearing inclusions indicate $CO_2$ gases were abundantly mixed with granitic melt until the pegmatic magma melt cooled to $290^{\circ}C$. Low density of the magmatic melt relative to the same volume of granitic magma is due to mixture of volatiles(mainly $CO_2$ gases) with the melt and larger space and slow cooling allowed to grow crystals of the pegmatic magma.

  • PDF

Dynamic Reanalysis of Base-Isolated Systems Using a Perturbation Technique (섭동법에 의한 면진구조계의 동적 재해석)

  • Kim, Hee-duck
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.4 no.2
    • /
    • pp.167-175
    • /
    • 2001
  • In this study, a general perturbation method is presented to reanalysis dynamic response of base-isolated systems. The perturbation is expanded to general order and which provide the formulation of perturbed solutions. in which eigensolutions of non-modified system are treated as unperturbed solutions. The accuracy of present method is tested using a 2-DOF system with isolator, where the stiffness and damping coefficients of isolator are changed, respectively, The reanalyzed eigensolutions and response using perturbed solutions are successfully approached to exact ones after just first perturbation. Supposing the practical criterion as ${\pm}5%$ error, the modification range of -50%~30% from original system can be allowed for the first order perturbation. Using higher order solutions, the applicable range will be wide.

  • PDF

Simple Postoperative Exercise of Acute Achilles Tendon Rupture without Active Range of Motion Exercise (아킬레스건 파열 이후의 능동적인 관절 범위 운동이 없는 간단한 재활 운동 방법)

  • Jae-Kwang Hwang;Youngjoo Jung;Dong-Kyo Seo
    • Journal of Korean Foot and Ankle Society
    • /
    • v.27 no.1
    • /
    • pp.12-16
    • /
    • 2023
  • Purpose: Postoperative exercise for acute Achilles tendon rupture is important for a patient's return to daily life and sports. On the other hand, the protocol requires considerable effort to educate patients and continuous checking. This study evaluated the outcome of a new simple and delayed rehabilitation protocol after Achilles tendon rupture repair. Materials and Methods: From July 2014 to November 2020, one hundred eighty-three patients were operated on by one surgeon. The exercise protocol was classified into two methods. One group (immediate protocol, control group) started immediate full weight bearing with a 20° plantar flexion range of motion from two days postoperatively. Ankle dorsiflexion was restricted to 0°. The other group (delayed protocol, case group) started full weight bearing with a controlled ankle motion boot from two weeks postoperatively. No range of motion exercise was allowed until six weeks postoperatively. Age, sex, body mass index, ankle range of motion, muscle power, time to return to previous physical activity, functional score, and complication rate were evaluated. The results of the two groups were compared using a Mann-Whitney test. Statistical significance was set as p<0.05. Results: The range of motion, double heel rising, and one-leg standing were achieved faster in the control group (p<0.05). However, single-heel rising, repeated single-heel rising, return to previous activity (work, run, and sport), and functional scores showed no statistical difference (p>0.05). Conclusion: Simple and delayed postoperative rehabilitation of acute Achilles tendon rupture without active range of motion exercises showed satisfactory functional results and a low complication rate.

Analysis of connecting joint anglle and moment in arm landing action in Sports Aerobics (스포츠에어로빅스 팔착지 동작의 연계관절 각도와 모멘트분석)

  • Yoo, Sil
    • Korean Journal of Applied Biomechanics
    • /
    • v.13 no.3
    • /
    • pp.311-325
    • /
    • 2003
  • A relation between the movement range of arms and arising moment has been studied to find out efficient movement range to minimize impact concerning arm landing in sports aerobics. Four male athletes who won top three in national-level sports aerobics competition were chosen for the experiment. They were allowed to jump in between two force platform so that the right hand and the right leg could land onto the front and rear force platform, respectively. The sampling frequency was 200 Hz. The main conclusions based on the analysis of the angle and joint moment parameters of wrist, elbow, and shoulder are as follows: 1. The wrist moment was small when its angle was small, indicating that the dorsi-flexion of the wrist joint offered a positive influence to reduce wrist moment. 2. The elbow angle increased as wrist angle decreased and vice versa. This means that the movement range of the wrist joint affects that of the elbow joint. The darsi-flexion of the wrist is the position to absorb the impact of the elbow effectively rather than to absorb the impact of the wrist itself. The impact is absorbed by the flexion of wrist joint rather than the wrist. 3. The degree of moment transfer of the shoulder joint, having absorbed the impact from the elbow and elbow joint, became dependent on the efficiency of the fore-joints impact absorption.

Development of Water Supply System under Uncertainty

  • Chung, Gun-Hui;Kim, Tae-Woong;Kim, Joong-Hoon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.2179-2183
    • /
    • 2009
  • As urbanization is progressed, the network for distributing water in a basin become complex due to the spatial expansion and parameter uncertainties of water supply systems. When a long range water supply plan is determined, the total construction and operation cost has to be evaluated with the system components and parameter uncertainties as many as possible. In this paper, the robust optimization approach of Bertsimas and Sim is applied in a hypothetical system to find a solution which remains feasible under the possible parameter uncertainties having the correlation effect between the uncertain coefficients. The system components to supply, treatment, and transport water are included in the developed water supply system and construction and expansion of the system is allowed for a long-range period. In this approach, the tradeoff between system robustness and total cost of the system is evaluated in terms of the degree of conservatism which can be converted to the probability of constraint violation. As a result, the degree of conservatism increases, the total cost is increased due to the installation of large capacity of treatment and transportation systems. The applied robust optimization technique can be used to determine a long-range water supply plan with the consideration of system failure.

  • PDF

An Approach to Improve the End-to-end Performance for Mobile Ad hoc Networks (이동 애드 혹 망을 위한 종단간의 성능 개선 방안)

  • 이용석;최웅철
    • Journal of KIISE:Information Networking
    • /
    • v.31 no.3
    • /
    • pp.327-334
    • /
    • 2004
  • In this paper, we make MAC protocol improvements for performance enhancement of multi-hop ad-hoc wireless networks. A node in ad-hoc wireless networks can transmit a packet only when the medium is available, and while a packet is being transmitted, no other nodes are allowed to transmit a packet if they are in carrier sensing range. Carrier sensing range can be divided into two disjoint areas of transmission range and carrier sensing zone(9), and we address the importance of the protocol behavior when a node is in carrier sensing zone. The characteristic of the carrier sensing zone is that a node can not know when the remaining time of the on-going transmission session expires or exactly when the media becomes available. Current MAC protocol does not behave in much different way between when a node is in transmission range and in carrier sensing zone. We have conducted a comprehensive simulation to study the performance improvements. The simulation results indicate that the performance is increased and the number of dropped packets due to collision is significantly reduced as much as a half.

Extension of Measurement Range of Gyro Sensor Data (누적형 자이로 센서 데이터의 최대측정영역 확장 방법)

  • Oh, Shi-Hwan;Kim, Jin-Hee
    • Aerospace Engineering and Technology
    • /
    • v.11 no.2
    • /
    • pp.39-48
    • /
    • 2012
  • In case a measurement output of gyro sensor is an accumulated angle counts, it is usually provided as a binary bit counter which is allowed to roll-over at its maximum or minimum value. And it is a well known fact that the roll-over behavior restricts the measurement range of the processed sensor output below the actual measurable range of sensor hardware itself. In this study, a conventional sensor data processing method for a gyro with an accumulated angle output is introduced. And also, an improved method which can extend the processed output range over the conventional one is proposed. It is also derived that the increased range depends on the variation speed of a input signal. Finally, the derived equations and the performance of the proposed algorithm are verified using a computer simulation.

A Study on the allowed range of viewing and copying right of criminal victim's investigation records (범죄 피해자의 수사기록 열람·등사권의 허용 범위에 관한 연구)

  • NAM, SEON MO
    • The Journal of the Convergence on Culture Technology
    • /
    • v.5 no.1
    • /
    • pp.127-137
    • /
    • 2019
  • In this study, I set the allowable range of viewing / copying rights of investigation records on criminal victims and bereaved families in the procedure of investigation. I tried to grasp the contents of the suspect's statement at an early stage and support it in order to cope appropriately Recently, the social consideration of people suffering from crime victims is expanding in fact. The scope of the investigation is set by the lawyer of the suspect in relation to the subordinate statute concerning the investigation and reading of the investigation record. In parallel, it is necessary to apply to the victim's lawyer or bereaved. This is a part that coincides with the purpose of certifying private rights such as browsing of litigation records to the victim and ultimately has a purpose related to the allowable range. Although it is the right to receive the investigation result at each stage, it is not used properly. Especially when distorted investigation progresses, if the suspect is not prosecuted, the victim may be in a state of regret. The important part can be summarized as the question of whether the investigation of the victim's lawyer is allowed to view and access the criminal records. This section has been reviewed with a focus on the current Act and its functional aspects should be emphasized and revised in accordance with the legal environment. These findings will contribute to ensuring victims' rights in the future. It is also used as an important resource in the legislative process, including the revision of the criminal procedure law.