• 전산구조공학
• /
• 제3권3호
• /
• pp.141-146
• /
• 1990

본 연구에서는 다목적연구로 반응도제어장치의 제어봉에 대한 내진해석을 수행하였다. 해석모델은 물속에 잠겨있는 두개의 관(중성자흡수봉 및 유동관)이 동심축상에 있으며 부분적으로 중첩된 두 관끝단의 유체틈에 의해 서로 동적으로 연결되어 있다. 유체에 의한 동적질량을 고려한 고유진동수를 구하고 안전정지지진에 의해 발생하는 최대응력과 최대변위를 동위상 및 역위상 거동별로 각각 구하였다. 해석결과 최대응력은 허용치보다 작게 나타나 구조적인 건전성은 입증되었으나, 최대변위는 두 개의 관이 서로 부딪히고 중성자흡수봉은 주위의 다른 벽에도 부딪히는 현상을 수발함을 알 수 있었다.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.151-159
• /
• 2006

It analyzed the mechanical behaviors of non-ballasted railway bridge (steel plate girder type) with ballast reinforced on the finite element analysis, field test and laboratory test far the static and dynamic responses. The major objective of this study is to investigate the effects and application of reinforcement for steel plate girder railway bridge by the external post-tensioning method. The reinforcement of non-ballast railway bridge had obviously stable dynamic behaviors due to the additional dead force which was ballast. But in case of static behaviors, static displacements and stresses had increased nearly the allowable values. Therefore we analyzed the mechanical behaviors of non-ballasted railway bridge with ballast reinforced and external post-tensioning reinforced on the finite element analysis and laboratory test for the static and dynamic behavior. As a result, the reinforcement of ballasted railway bridge the external post-tensioning method are obviously effective for the additional dead force which is ballast. The analytical and experimental study are carried out to investigate the post-tension force decrease bending behavior and deflection in composite bridge for serviceability. The servicing railway bridge with ballast reinforced has need of the reasonable reinforcement measures which could be reducing the effect of additional dead load that degradation phenomenon of structure by an unusual. stresses and a drop durability.

• 한국전산구조공학회논문집
• /
• 제17권2호
• /
• pp.95-104
• /
• 2004

최근 건설이 증가하고 있는 곡선교는 1960년대 까지는 직선 거더의 조합으로 구성하여 건설되어 왔으나, 현재 곡선 거더의 사용이 증대되고 있는 추세이다. 곡선 거더를 사용하는 경우에는 시간과 건설비용의 절감 뿐 아니라 미관상으로도 유리하다. 판형교에서는 전단좌굴을 방지하기 위하여 전단 좌굴강도의 검토와 보강재의 설계가 반드시 필요하다. 직선 복부판과 비교하여 곡선 복부판은 형상비와 곡률에 따라 전단좌굴 강도가 변화하나, 현재까지 곡선 복부판의 전단좌굴강도에 대한 연구는 그다지 이루어지지 않은 실정이다. 따라서 본 연구에서는 곡선복부판의 선단좌굴 강도를 유한요소해석을 통하여 알아보고 이론 산정하는 간략식을 제시하였다.

• 대한의용생체공학회:의공학회지
• /
• 제17권1호
• /
• pp.49-60
• /
• 1996

An experimental investigation was performed under steady flow condition to assess hydrodynamic performance of floating-type monoleaflet polymer valves (MLPV) withdifferent leaflet thickness. The St. Jude Medical valve (SJMV) was also used for comparison test. Pressure drops of MLPVS are larger than those for other types of polymer valves and mechanical valves. Furthermore, the thicker is the leaflet thickness of the polymer valve, the larger are the corresponding pressure drop. The velocity profiles for MLPs reveal a large reversed flow region downward to the valve position. The maximum wall shear stresses of MLPVS at a flow rate of $30{\ell}$/min are in the range 50-130 dyn/$cm^2$, and the corresponding maximum Reynolds shear stresses are in the range of 100-500 dyn/$cm^2$, respectively, which are beyond the allowable limit clinically. In contrast, floating-type monoleaflet polymer valves show better hydrodynamic performance in leakage volume. From the designing point of view, it may be concluded that the optimum thickness of leaflet for better hydrodynamic performance is one of the Important parameters.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 춘계학술대회
• /
• pp.241-246
• /
• 1995

An experimental investigation was performed under steady flow condition to assess hydrodynamic performance of floating-type monoleaflet polymer valves (MLPV) with different leaflet thickness. The St. Jude Medical valve (SJMV) was also used for comparison tests. Pressure drops of MLPVs are larger than those for other types of polymer valves and mechanical valves. Furthermore, the thicker is the leaflet thickness of a polymer valve, the larger arc the corresponding press drop. The velocity profiles for MLPV reveal a large reversed flow region downward to the valve position. The maximum wall shear stresses of MLPVs at a flow rate of 30 l/min are in the range $54-130\;dyn/cm^2$, and the corresponding maximum. Reynolds shear stresses are in the range of $100-500\;dyn/cm^2$, respectively. Both arc beyond the allowable limit clinically. In contrast, floating-type monoleaflet polymer valves show better hydrodynamic performance in leakage volume. From the designing point of view, it can be concluded that the optimum thickness of leaflet for better hydrodynamic performance is one of the important parameters.

• 산업기술연구
• /
• 제23권A호
• /
• pp.69-81
• /
• 2003

Numerical analysis is important for the design, construction and maintenance of large caverns. The rock mass contains generally discontinuities such as faults, joints and fissures. The mechanical behavior and geometric characteristics of these discontinuities would have a significant impact on the stability of the caverns. In this research the Distinct Element Method(DEM) was used to analyze the structural stability of the large cavern. The Barton-Bandis Joint Model (B-B J.M) was used as a constitutive model for the joint. In addition, two different cases 1) analysis with a support system and 2) analysis with no support system, were analyzed to optimize a support system and to investigate reinforcing effects of a support system. The most significant parameters of in-situ stress, JRC of in-situ natural joints, and spatial distribution characteristics of discontinuities were acquired through field investigation. Displacement (horizontal, joint shear), maximum joint opening, maximum and minimum principal stresses, range of relaxed zone, rockbolt axial forces and shotcrete stresses were calculated at each excavation stage. As a result of analysis the calculated values proved to be under the allowable value Rockbolts also proved to be an efficient support measure to control joint shear displacement which had significant effects on extending the relaxed zone. As a consequence, the structural stability of the cavern was assured with an appropriate support system.

• Structural Engineering and Mechanics
• /
• 제51권5호
• /
• pp.847-866
• /
• 2014

This paper describes a formulation to predict optimum post-tensioning forces and cable dimensioning for self-anchored cable-stayed suspension bridges. The analysis is developed with respect to both dead and live load configurations, taking into account design constrains concerning serviceability and ultimate limit states. In particular, under dead loads, the analysis is developed with the purpose to calculate the post-tensioning cable forces to achieve minimum deflections for both girder and pylons. Moreover, under live loads, for each cable elements, the lowest required cross-section area is determined, which verifies prescriptions, under ultimate or serviceability limit states, on maximum allowable stresses and bridge deflections. The final configuration is obtained by means of an iterative procedure, which leads to a progressive definition of the stay, hanger and main cable characteristics, concerning both post-tensioning cable stresses and cross-sections. The design procedure is developed in the framework of a FE modeling, by using a refined formulation of the bridge components, taking into account of geometric nonlinearities involved in the bridge components. The results demonstrate that the proposed method can be easily utilized to predict the cable dimensioning also in the framework of long span bridge structures, in which typically more complexities are expected in view of the large number of variables involved in the design analysis.

• 한국방재학회 논문집
• /
• 제8권1호
• /
• pp.47-55
• /
• 2008

본 연구에서는 최근 발생하는 지중 매설관의 파손이 곡선부에 집중되고 있는 현실적인 문제를 통해 지중 매설관의 곡선부에 대해 보다 합리적인 해석 방법을 제시하고, 곡선부를 갖는 지중 매설관의 안전성 평가에 관한 연구를 수행하였다. 실제 시공 및 균열이 발생한 사례를 바탕으로 대상 모델을 선정하고 지중 매설관에 작용 가능한 하중 조합을 고려하였다. 3차원 유한요소해석을 통해 변형량과 응력 그리고 좌굴에 대한 구조해석을 수행하였으며 이를 통해 직선부에 비해 곡선부에 응력이 집중되며 지중 매설관의 안전성을 저해 하고 있음을 볼 수 있었다. 이러한 결과를 통해 곡선부를 갖는 지중매설관의 경우곡선 연결부에 대한 정밀한응력 해석을 통한 안전성 평가가 이루어져야 한다고 판단된다.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1034-1039
• /
• 2006

본 논문은 내진등급 IIA 글로브 밸브의 지진하중에 대한 구조 건전성을 평가하였다. 밸브 구조물을 3차원 모델링하여 유한요소법을 사용하여 모달 해석 및 등가 정적 응력해석을 수행하였다. 모달 해석 결과 구조물은 충분히 강건하므로 지진 가속도 값을 사용한 등가 정적 응력해석이 가능하였다. 정적 응력 해석에서 구한 응력을 조합하여 원자력 규격집에 근거한 허용기준에 따라 밸브의 구조 건전성을 평가하였다. 지진하중에서 발생한 응력값이 허용값 아래에 분포하므로 글로브 밸브 구조물은 구조적 건전성을 유지할 수 있다고 평가할 수 있다.

• Tribology and Lubricants
• /
• 제38권1호
• /
• pp.22-26
• /
• 2022

A 1.7-ton grade small excavator is a construction equipment that can perform various functions in limited spaces where heavy equipment cannot enter easily. Owing to the recent acceleration of urbanization, it has been used increasingly in drainage and gas pipes, as well as for road repair works in urban areas. The power train of a traveling reducer for a 1.7-ton grade small excavator utilizes a complex planetary gear system. Complex planetary gears are vital to the power train of a traveling reducer as it mitigates the fatigue strength problem. In the present study, the specifications of a complex planetary gear train are calculated; furthermore, the gear bending and compressive stresses of the complex planetary gears are analyzed to achieve an optimal design of the latter in terms of cost and reliability. In this study, the actual gear bending and compressive stresses of a planetary gear system are analyzed using a self-developed gear design program based on the Lewes and Hertz equation. Subsequently, the calculated specifications of the complex planetary gears are verified by evaluating the results with the data of allowable bending and compressive stress based on curves of stress vs. number of cycles of the gears.