• Composites Research
• /
• 제26권4호
• /
• pp.259-264
• /
• 2013

본 연구에서는 기계적 전기적 기능을 모두 만족하는 다중대역 스킨구조물에서의 복사 소자를 2중 사출으로 제작하였다. 추후 외부 스킨 구조 변형에 따른 복사 소자의 안정성을 검증하기 위하여 충격 및 좌굴에 대한 시험과 축 하중과 전단 하중에 대한 강도 해석을 실시하였다. 그리고 다중 대역 안테나 스킨 구조의 복사 소자에 대한 실험적 방법과 해석적 방법을 통한 강도 분석 결과, 구조의 허용 하중을 예측하고 충격과 좌굴에 대한 안정성을 평가할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권4호
• /
• pp.149-158
• /
• 2005

본 논문에서는 전통 목조 건축물의 보다 실제에 가까운 구조특성을 파악하고 건물에 대한 안전성을 평가하기 위하여 현존하는 대표적인 전통 목조 건축물인 부석사 무량수전을 대상으로 하여 최대한 실제와 유사한 거동상태가 되도록 건축물을 3차원 및 2차원으로 모델링하여 범용 구조해석 프로그램을 통한 구조해석을 실시한 후에 해석결과를 비교, 분석하고 검토하였다.

• 대한토목학회논문집
• /
• 제5권4호
• /
• pp.23-30
• /
• 1985

비점성토 지반에서 말뚝 기초의 지지력을 산정하는 방법으로 동역학적 공식이 있다. 이 공식은 사용이 간편한 반면에 공식에 사용되는 경험적인 계수값들의 타당성과 항타기록의 정확성등이 문제가 된다. 본 논문에서는 현재 널리 사용되는 6 종류의 공식을 선정하여 각 공식이 산출한 계산 허용 지지력을 말뚝 재하 시험으로부터 구한 실측 허용 지지력과 비교 분석하고, 말뚝 재하시험 결과와 동일한 허용 지지력을 산출할 수 있도록 선형 회귀곡선을 이용하여 각 공식을 수정하였다. 수정된 공식중에서 Gates의 공식이 가장 신뢰도가 높은 것으로 나타났으며, 기존의 Olson 수정공식과 비교한 결과 본 논문 제안 공식이 10% 이상 보수적인 결과를 산출하였다.

• 한국물환경학회지
• /
• 제20권2호
• /
• pp.151-156
• /
• 2004

A decision support system, Watershed Analysis Risk Management Framework(WARMF), was applied to the Kyungan Stream watershed, a tributary of Lake Paldang, for calculation of total maximum daily loads(TMDL). The WARMF system was developed by Systech Engineering, USA, and has been successfully used in several watersheds, for TMDL studies. The study area was divided into 14 sub-basins, based on digital elevation model(DEM). The integrated watershed and stream model of WARMF was validated by flow and BOD data measured during the year of 1999. There were reasonable agreements between model results and field data, both in water flow and BOD. The validated Kyungan WARMF was extensively utilized to study the quantitative relationship between waste loads and receiving water quality. Based on TMDL guideline at Paldang Lake and Kyungan Stream, the water quality criterion were set to be 3.0mg/L, 3.5mg/L, and 4.0mg/L at the watershed outlet. The allowable waste loads of BOD, both from point and non-point sources, were determined at each water quality criterion. From this study, it was concluded that the WARMF provided several advantages over the conventional application of watershed and stream models for TMDL study, such as time variable simulations, multiple possible soutions, and reduction loads for goal water quality, etc.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 말뚝기초 학술발표회
• /
• pp.65-84
• /
• 2000

Europe and US which have more restrictive regulations than Korea about the noise and vibration during construction are using Auger-cast Pile to reduce the problem relating with noise and vibration. However Auger-cast Pile has problems like difficult quality control and low bearing capacity. In Europe, Displacement in-situ concrete Pile has been used to sove that problems since 1990s, and Korea has performed the test construction in 1997 and it has been used as the real structural foundation since 1998. Test and real construction results verified that the allowable capacity of the pile(diameter = 410mm) is between 70 and 100ton. Though De Beer & Van Imps design method utilizing CPT result is used to calculate the bearing capacity of the Displacement in-situ Pile, Korea is dependant upon the SPT as the sounding test, so design method utilizing SPT result is necessary to promote the application of the pile. To find out reasonable design method using SPT result, rearing capacity of the pile constructed in sand and clay in Korea was calculated using Meyerhof, SPT-CPT translation method, Nordlund, Douglas and DM-7 method, and the calculation results were compared to the load test result. Analysis result shows that SPT-CPT translation method is more reliable than others and economical design can be possible because it considers efficiently the friction capacity of Displacement in-situ Pile.

• 대한토목학회논문집
• /
• 제11권4호
• /
• pp.9-15
• /
• 1991

본 연구는 도로교량들의 효율적인 안전도 명가 및 내하급수 판정 전산화 시스템을 개발하는데 그 목적이 있다. 이를 위해 현행 도로교 내하급수 체계를 합리적으로 개선한 후 외관조사 또는 가용 통계자료 만으로 안전성 평가를 실시할 수 있는 신뢰성 방법에 기초한 합리적인 내하력 평가방법을 제시하고 비상작전시 군용차량의 설제적인 허용통과 급수 판정시스템을 개발하였다. 연구결과 본 연구에서 제시된 내하력 및 내하급수 판정시스템, 그리고 내하력 평가 프로그램 BRS(Bridge Rating System)은 교량의 노후도와 각종 불확실량을 체계적으로 반영한 실 내하력 평가수단으로서 장차 교량의 안전성 및 내하력 평가에 널리 활용될 수 있다고 사료되었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.363-366
• /
• 2009

The maximum output torque developed by the machine is dependent on the allowable current rating and maximum voltage that the inverter can supply to the machine. Therefore, to use the inverter capacity fully, it is desirable to use the control scheme considering the voltage and current limit condition, which can yield the maximum torque per ampere over the entire speed range. This controller is controlled speed and current using hybrid PI(HBPI) controller and estimation of speed using ANN. Also, this paper is proposed control of maximum torque per ampere(MTPA) of induction motor. This strategy is proposed which is simple in structure and has the honest goal of minimizing the stator current magnitude for given load torque. The performance of the proposed induction motor drive with maximum torque control using HBPI controller is verified by analysis results at dynamic operation conditions.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.100-108
• /
• 2010

A low voltage wire should be used considering that a load used in the end is a low voltage. In regard to these wires, there are needs for research about the wire thickness calculation in accordance with IEC standard because the standardization process for IEC (KS standard) was completed on June 30, 2005, and they stopped producing NEC-standard products by the order from Korean Agency for Technology and Standards under Ministry of Knowledge Economy (former Ministry of Commerce, Industry and Energy) since July 1, 2006. This study compared, in terms of the thickness calculation of low voltage wire, a reduction factor application by IEC standard about allowed current and an application for calculation of voltage drop. It also proposed the formula for IEC standard to decrease errors and resolve the difficulty of standardized calculation by analyzing the difference between simplified formula and standardized formula that are the most frequently used calculation method of voltage drop.

• 한국강구조학회 논문집
• /
• 제22권5호
• /
• pp.435-443
• /
• 2010

현행 송전강관철탑의 경우 허용응력 설계개념을 도입한 철탑설계기준을 적용하여 설계, 제작되고 있다. 이 철탑설계기준의 압축재의 설계 강도 결정은 압축재의 허용좌굴응력에 의하여 결정되고 있으나 이는 접합부의 내력을 고려치 않은 값이다. 부재가 압축좌굴내력에 도달하기 전에 접합부의 변형으로 인하여 국부변형에 의한 접합부 파괴가 발생할 수 있다. 따라서 본 연구에서는 접합부의 보강형태별로 접합부내력을 산출하고 이를 데이터베이스화한 후 지난 연구에서 도출한 등가비선형해석기법의 부재내력과의 상호 비교를 통하여 부재파괴와 접합부파괴의 선행 여부를 판별할 수 있는 실용적인 평가 및 설계 기법을 제시하였다.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.151-159
• /
• 2006

It analyzed the mechanical behaviors of non-ballasted railway bridge (steel plate girder type) with ballast reinforced on the finite element analysis, field test and laboratory test far the static and dynamic responses. The major objective of this study is to investigate the effects and application of reinforcement for steel plate girder railway bridge by the external post-tensioning method. The reinforcement of non-ballast railway bridge had obviously stable dynamic behaviors due to the additional dead force which was ballast. But in case of static behaviors, static displacements and stresses had increased nearly the allowable values. Therefore we analyzed the mechanical behaviors of non-ballasted railway bridge with ballast reinforced and external post-tensioning reinforced on the finite element analysis and laboratory test for the static and dynamic behavior. As a result, the reinforcement of ballasted railway bridge the external post-tensioning method are obviously effective for the additional dead force which is ballast. The analytical and experimental study are carried out to investigate the post-tension force decrease bending behavior and deflection in composite bridge for serviceability. The servicing railway bridge with ballast reinforced has need of the reasonable reinforcement measures which could be reducing the effect of additional dead load that degradation phenomenon of structure by an unusual. stresses and a drop durability.