• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.36-47
• /
• 2006

인공위성에서 자세획득을 위해 기동을 하거나 이상상태 발생으로 위성이 임무를 수행하지 못하여 결국에 위성을 잃어버리게 되는 Flat Spin 상태에서 자세를 복구하는 방안인 Dual Spin Turn의 원리에 대한 연구가 수행되었다. Dual Spin Turn 현상에서 중요한 모멘텀 전달 원리를 물리적으로 명확하게 설명하였다. 그리고 기존의 연구결과에서 많이 알려진 방법을 포함하여 일반적인 위성의 관성모멘트 조건과 모멘텀 휠의 회전 방향 등을 여러 가지로 변화시켜 보면서 타당성을 검증하였다. Dual Spin Turn 과정은 개루프 제어와 에너지 감쇄장치의 도입이라는 2단계 제어방법을 이용하여 여러 경우에 대해 시뮬레이션으로 분석해보았다. 또한 제어의 타당성을 입증하기 위해 2단계 제어 이후의 안정성에 대해 검증하였다. 그리고 Dual Spin Turn을 이용하여 Flat Spin Recovery를 수행하는 시나리오를 예제로 제시하였다.

• 한국표면공학회지
• /
• 제40권4호
• /
• pp.190-196
• /
• 2007

Dye sensitized solar cells(DSSC) are the most promising future energy resource due to their high energy efficiency, low production cost, and simple manufacturing process. But one problem in DSSC is short life time compared to silicon solar cells. This problem occurred from photocatalytic degradation of dye material by nanometer sized $TiO_2$ particles. To prevent dye degradation as well as to increase its life time, the transparent coating film is needed for UV blocking. In this study, we synthesized nanometer sized $TiO_2$ particles in sols by increasing its internal pressure up to 200 bar in autoclave at $120^{\circ}C$ for 10 hrs. The synthesized $TiO_2$ sols were all formed with brookite phase and their particle size was several nm to 30 nm. Synthesized $TiO_2$ sols were coated on the backside of fluorine doped tin oxide(FTO) glass by ink jet printing method. With increasing coating thickness by repeated ink jet coating, the absorbance of UV region (under 400 nm) also increases reasonably. Decomposition test of titania powders dispersed in 0.1 mM amaranth solution covered with $TiO_2$ coating glass shows more stable dye properties under UV irradiation, compared to that with as-received FTO glass.

• 한국입자에어로졸학회지
• /
• 제15권3호
• /
• pp.105-113
• /
• 2019

The exhaust emissions from coal-fired power plants have received much attention because coal-fired power plants are the one of the largest sources of particulate matter (PM) emissions in South Korea. To measure the PM10 and PM2.5, we developed the novel diluter which is comprised of ejector and porous tube in series. The dilution ratio must be defined to calculate particle concentrations of the sampled air as well as to probe match for the isokinetic sampling. For this reason, we verified the dilution ratio of the developed diluter by the flow rate, numerical solution, gas concentration and particle concentration. The ejector-supplied flow rates were 10-50 L/min and the porous tube-supplied flow rates were 30, 50 L/min in this study. All methods above showed similar dilution ratios to each other within 10 % error rate. The dilution ratio was confirmed by comparing mass concentrations before and after the dilution process.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.541-552
• /
• 2019

Construction development and greenhouse gas emissions have globally required a strategic management to take some steps to stain and maintain the environment. Nowadays, recycled aggregates, in particular ceramic waste, have been widely used in concrete structures due to the economic and environmentally friendly solution, requiring the knowledge of recycled concrete. Also, one of the materials used as a substitute for concrete cement is wollastonite mineral to decrease carbon dioxide (CO2) from the cement production process by reducing the concrete consumption in concrete. The purpose of this study is to investigate the effect of wollastonite on the mechanical properties and durability of conventional composite concrete, containing recycled aggregates such as compressive strength, tensile strength (Brazilian test), and durability to acidic environment. On the other hand, in order to determine the strength and durability of the concrete, 5 mixing designs including different wollastonite values and recovered aggregates including constant values have been compared to the water - cement ratio (w/c) constant in all designs. The experimental results have shown that design 5 (containing 40% wollastonite) shows only 6.1% decrease in compressive strength and 4.9% decrease in tensile strength compared to the control plane. Consequently, the use of wollastonite powder to the manufacturing of conventional structural concrete containing recycled ceramic aggregates, in addition to improving some of the properties of concrete are environmentally friendly solutions, providing natural recycling of materials.

• 한국융합학회논문지
• /
• 제10권11호
• /
• pp.71-77
• /
• 2019

본 연구에서는 다중 선택 배낭 모형의 최적해를 찾는 해법을 제시하고자 한다. 다중 선택은 동일한 집단에 소속된 구성원들이 동시에 선택되거나 동시에 배제되는 상황에서 관찰된다. 각 집단 간 관련성의 측정치인 오목 함수가 의사결정기준으로 설정되었다. 다중 선택은 비선형 제약식으로 모형화 되는데 일반 배낭 제약식으로 변환될 수 있다. 따라서 최적 해법 개발을 위해 오목함수 최소화 문제와 배낭 문제의 일반적인 해법들에서 채택하고 있는 분지 한계 접근법을 이용하였다. 단체상에서 오목함수를 가장 근접하게 하한추정하는 함수가 1차식이라는 사실이 한계 전략의 이론적 토대가 된다. 또한 하위 단계에서도 1차식 목적함수가 유일하게 결정되도록, 후보 단체를 두 개의 초평면에 투사시킴으로써 1차원 낮은 두 개의 하위 단체로 분할하는 방법이 분지 전략의 핵심이다. 앞으로 본 연구의 결과는 다양한 형태의 배낭 제약식 하에서의 오목 함수 최소화 문제의 해법을 개발하는데 응용될 수 있을 것이다.

• 한국물환경학회지
• /
• 제35권2호
• /
• pp.123-130
• /
• 2019

Ethylenediaminetetraacetic acid-modified bentonite (EMB) was used for adsorption of zinc ion (Zn) from aqueous solution, compared with unmodified bentonite (UB). Parameters such as dose (0.750 ~ 3.125 g/L), mixing intensity (10 ~ 150 rpm), contact time (0.17 ~ 30 min), pH (2 ~ 7), and temperature (298 ~ 338 K), were studied. Zn removal efficiency for EMB was 20 ~ 30 % higher, than that for UB, in all experiments. Thermodynamic studies demonstrated that adsorption process was spontaneous with Gibb's free energy (${\Delta}G$) values, ranging between -5.211 and -7.175 kJ/mol for EMB, and -0.984 and -2.059 kJ/mol for UB, and endothermic with enthalpy (${\Delta}H$) value of 9.418 kJ/mol for EMB and 7.022 kJ/mol for UB. Adsorption kinetics was found to follow the pseudo-second order kinetics model, and its rate constant was 3.41 for EMB and $2.00g/mg{\cdot}min$ for UB. Adsorption equilibrium data for EMB were best represented by the Langmuir adsorption isotherm, and calculated maximum adsorption capacity was 2.768 mg/g. It was found that the best conditions for Zn removal of EMB within the range of operation used, were 3.125 g/L dose, 90 rpm intensity, 10 min contact time, pH 4, and 338 K. Therefore, EMB has good potential for adsorption of Zn.

• Advances in nano research
• /
• 제13권6호
• /
• pp.513-525
• /
• 2022

In this study, it was aimed to evaluate direct oxidation of aqueous solution containing cefalexin antibiotic with new generation Sn/Sb/Ni: 500/8/1 anode. The fact that there is no such a study on treatment of cefalexin with these new anode made this study unique. According to the operating parameters evaluation COD graphs showed clearer results compared to TOC and CLX and thus, it was it was chosen as major parameter. Furthermore, pseudo-first degree kd values were calculated from CLX results to show more accurate and specific results. Experimental results showed that after 60 min of electrochemical oxidation, complete removal of COD and TOC was accomplished with 750 mg L^-1 KCl, at pH 7, 50 mA cm^-2 current density and 1 cm anode-cathode distance. Also, the stability of the Sn/Sb/Ni anode was evaluated by taking SEM and AFM images and XRD analysis before and after of electrochemical oxidation processes. According to the results, it was not occurred too much change on the anode surface even after 300 h of electrolysis. Thus, it was thought that the anode material was not corroded to a large extent. Furthermore, the removal efficiencies were very high for almost all the time and conditions. According to the results of the study, electrochemical oxidation with new generation Sn/Sb/Ni anodes for the removal of cefalexin antibiotic was found very successful and applicable due to require less reaction time complete mineralization and doesn't require pH adjustment step compared to other studies in literature. In future studies, different antibiotic types should be studied with this anode and maybe with real wastewaters to test applicability of the process in treatment of pharmaceutical wastewaters containing antibiotics, in a better way.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.191-201
• /
• 2021

In this study, an eco-friendly indigo reduction system(scale up reduction, use of buffer solution, and pH control) using baker's yeast(Saccharomyces cerevisiae) was applied for natural indigo(Polygonum tinctorium) dyeing of Hanji fabric and Hanji-mixture fabric(Hanji/Cotton, Hanji/Silk). The effect of concentration of baker's yeast, repeat dyeing, and bath reuse was investigated in terms of dye uptake indicating reduction power. And the oxidation-reduction potential(ORP) was monitored. We also evaluated color properties and colorfastness according to the color strength. The yeast concentration did not significantly affect the maximum reduction power. However, the highest yeast concentration was effective in improving the initial dye uptake, and its the reduction retention power was the most excellent. Even on the last reduction day, the effect of increasing the dye uptake by repeat dyeing was observed. And it was confirmed that the reduction bath could be reused for up to 30 days by supplementing yeast at the end of reduction. For all the fabrics used, deeper and darker PB color were obtained by repeat dyeing. As dyeing was repeated, purplish tint got stronger on the Hanji/Silk fabric compared to other fabrics. Regardless of the composition of Hanji fabrics and color strength, washing and dry cleaning fastness were relatively good with above rating 4-5, and fastness to rubbing and light were acceptable with a rating 3-4 ~ 4-5. The eco-friendly natural indigo dyeing process using niram and baker's yeast would offer global marketability and diversity of Hanji product as a sustainable high value-added material.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.67-82
• /
• 2022

In this paper, buckling and free vibration of imperfect, functionally graded beams, including porosities, are investigated, using a higher order shear strain theory. Due to defects during the manufacturing process, micro porosities may appear in the material, hence the appearance of this imperfection in the structure. The material properties of the beams are assumed to vary regularly, with power and sigmoid law, in the direction of thickness. A novel porosity distribution affecting the functionally graded volume fraction is presented. For the compact formulation used for cementite-based materials and already used in P-FGM, we have adapted it for the distribution of S-FGM. The equations of motion in the FG beam are derived using Hamilton's principle. The boundary conditions for beam FG are assumed to be simply supported. Navier's solution is used to obtain the closed form solutions of the FG beam. The numerical results of this work are compared with those of other published research to verify accuracy and reliability. The comparisons of different shear shape functions, the influence of porosity, thickness and inhomogeneity parameters on buckling and free vibration of the FG beam are all discussed. It is established that the present work is more precise than certain theories developed previously.

• 광물과 암석
• /
• 제36권4호
• /
• pp.337-343
• /
• 2023

감람석은 철감람석과 마그네슘감람석의 완전고용체로서 암석형 행성, 운석, 소행성, 행성간 먼지 등에 풍부하게 함유되어 있다. 감람석은 조성범위가 매우 넓기 때문에 감람석 함유 시료의 광물정량분석을 위해서는 다양한 조성의 감람석 표준물질을 구비해야 한다. 감람석 표준물질을 전기로와 스테인리스강관을 이용하여 1000~1100 ℃ 범위의 온도에서 합성하였다. 엑스선회절분석에 의하면 시료에 따라 합성불순물과 미반응물이 있으나 전반적으로 전조성 범위를 포함하는 감람석이 합성되었다. 합성 감람석들은 출발물질의 철감람석 몰비에 비례하여 단위포 치수가 선형으로 증가하는 경향을 보였으며, 회절강도도 자연산 감람석과 부합하였다. 그러나 철 함량이 높은 합성 감람석에서 불순물 함량이 증가하는 경향이 있어 아직 모든 합성 감람석을 표준물질로 사용할 수 없으며, 출발물질의 고순도화, 반응시간 및 온도 조절 등의 합성과정 개선이 필요하다.