• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.69-76
• /
• 2007

The body of an excavator, one sort of the construction equipment, consists of mainframe part, track frame part, boom part and arm part. The all parts are manufactured in the body welding operation. The scheduling in the body welding operation of a construction equipment manufacturing is to take all the various constraints into consideration. The offset time, due date, daily capacity of operations, daily jig's capacity, precedence relation, outsourcing, alternative resource and all of the shop floor environment should be considered. An APS(Advanced Planning & Scheduling) system is a proper and efficient system in such circumstance. In this paper, we present an APS system, the optimal scheduling system for the construction equipment manufacturing specifically for the body welding operation, using ILOG Solver/Scheduler. ILOG Solver/Scheduler is a general purposed commercial software which supports to find a feasible or optimal solution using object oriented technique and constraints satisfaction programming, given constraints and objectives.

• Journal of Convergence for Information Technology
• /
• v.12 no.1
• /
• pp.172-179
• /
• 2022

Unlike other processes such as washing, the ironing process in the laundry process is difficult to standardize and thus relies on manual labor. Unlike upper garments, pants have pleats at the waist as well as a crease line below the waist, Therefore, two separate ironing devices have been developed and used. However, in this method, problems such as additional worker input, space loss, and wrinkling of pants occur due to manual movement between processes, Consequently, a pants ironing device that combines the two equipments is required. The all-in-one pants ironing system described in this paper automatically sequentially irons the upper part and side of the pants regardless of the length, shape, and upper pleats of the pants. It also performs a self-diagnosis function while displaying the ironing progress on the user's monitor. As a result of this study, it became possible to double the amount of ironing and reduce power consumption by more than 20% compared to the case of using two independent equipment.

• Journal of Environmental Impact Assessment
• /
• v.10 no.3
• /
• pp.195-209
• /
• 2001

The objective of this study is intended to propose plans for reforming environmental impact assessment(EIA) systems by reviewing the current legal systems of EIA related laws and their implementation status in Korea, and by comparing the Korean situation to EIA systems in several foreign countries. This study tried to integrate all EIA related systems scattered over several laws into one comprehensive EIA law, and also to develop legal procedures necessary to accomplish the legislative purpose of the integrated EIA law. Therefore, I propose four reforms (1) All EIA systems should be integrated into one comprehensive EIA act. (2) Administrative plans and policies, though environmentally harmful, which are not currently subject to any prior consultation system, should be covered by the prior consultation system. (3) A screening or scoping should be adopted. (4) Widen civil participation should be encouraged and the administrative control enforcement and introduction of group litigation or citizen suits would be considered.

• 프린팅코리아
• /
• v.11 no.5
• /
• pp.106-106
• /
• 2012

코닥은 최근 드루파2012에서 전시될 '코닥 어치브 올인원 CTP 시스템(Kodak Achieve All-In-One CTP System)'의 유용성에 대해 발표했다.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11S
• /
• pp.3299-3308
• /
• 1999

One of the most important prerequisites for a successful software process is the collaboration and software requirements negotiation of all stakeholders in the software development process. Remote users using computer networks can negotiate software requirements by computer supported system, and can share their informations. The goal of software requirements negotiation system is an integration of all win conditions and an agreement after resolution of conflicts. The existing systems need an exclusive system and must be dependent on specific platform and network. Users must have the knowledge of all stakeholder's status and use homogeneous collaborating applications. This paper presents the Web-based software requirements negotiation system for the purpose of resolution of the existing systems' problems. The Web-based software requirements negotiation system can be driven by WinWin Spiral model, and it is based on hybrid execution method. The proposed system is validated and tested on heterogeneous environments.

• Korean Journal of Digital Imaging in Medicine
• /
• v.5 no.1
• /
• pp.130-136
• /
• 2002

One of current trends of medical technology is analog to digital. Moreover, The Government put a premium on PACS(Picture Archiving and Communication System) for Medical Insurance in November, 1999. Therefore many hospitals are installing(or planning to install) PACS facilities on their buildings. However most of hospitals didn't consider PACS facilities in the beginning of construction. In particular, the Networking is one of the most difficult things for PACS installation. There is no space for network equipments, and no path for network lines, etc. To solve these problems, wireless network is proposed. The wireless network is divided to three parts mainly. One is the wireless communication for Local Area Network, another is the data transmission through a satellite for Tele-Radiology, and the last one is the technology using Bluetooth for each sub-system of PACS. But there are other problems in wireless systems, i.e., network bandwidth, system stability, interference with other devices. The purpose of this paper is to suggest the future and new trend of PACS including all the problems.

• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.283-293
• /
• 2005

The purpose of this study was to evaluate the effect of dual bonding technique by comparing microshear bond strength between two different luting methods of resin cement to tooth dentin. Three dentin bonding systems(All-Bond 2, One-Step, Clearfil SE Bond), two temporary cements (Propac, Freegenol) were used in this study. In groups used conventional luting procedure, dentin surfaces were left untreated. In groups used dual bonding technique, three dentin bonding systems were applied to each dentin surface. All specimens were covered with each temporary cement. The temporary cements were removed and each group was treated using one of three different dentin bonding system. A resin cement was applied to the glass cylinder surface and the cylinder was bonded to the dentin surface. Then, micro-shear bond strength test was performed. For the evaluation of the morphology at the resin/dentin interface, SEM examination was also performed. 1. Conventional luting procedure showed higher micro-shear bond strengths than dual boning technique. However, there were no significant differences. 2. Freegenol showed higher micro-shear bond strengths than Propac, but there were no significant differences. 3. In groups used dual bonding technique, SE Bond showed significantly higher micro-shear bond strengths in One-Step and All-Bond 2 (p<0.05), but there was no significant difference between One-Step and All-Bond 2. 4. In SEM observation, with the use of All-Bond 2 and One-Step, very long and numerous resin tags were observed. This study suggests that there were no findings that the dual bonding technique would be better than the conventional luting procedure.

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.48-54
• /
• 2014

In this paper, three refrigeration systems bypassing hot-gas to compressor outlet, compressor and condenser outlet and evaporator inlet are theoretically compared to offer basic design data for performance depending on cooling load using a HYSYS program. The main results are summarized as follows : First, the COP of third system is the highest. Next, the COP of second system is higher than first one. And, the temperature of compressor inlet of third system is constant for all cooling load. Compared to first and second system, the compressor inlet temperature of the first system is higher than second one for all cooling loads. From the above results, third system, which is bypassing hot-gas to evaporator inlet, is more advantageous when considering the precise temperature control and excellent performance of oil and water cooler of industrial machine.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.82-90
• /
• 1998

The study was carried out to investigate on the response of environmental sanitation problems in action of the volume based waste charge system in Seoul. The responses from the 396 persons who dwelled in Seoul was stimulatively answered, this system was considered as a successful one 69.6% of total answers, but little portion (21.2%) of those was unknown on the mean of this system. And we knew that this system was need to the communication and education through the press media about this one. After the action of the volume based waste charge system, the volume of refuse discharged in a day was decreased 30-50% than before. In the problems of environmental sanitation after this system, the number of sanitary insect(cockroach etc) and rat was decreased, also the production of order and dust caused by refuse was decreased in comparison with those before. This results were considered that the Separate Collection should be perfectly performed. In response, the regular envelope of refuge was serious problems, the improvement for this one was demanded, The kind of difficult refuse treated was waste foodstuffs> electric products> rubbers> furniture> bottles, cans>papers, pulps etc. and the next proposal for this system should be prepared. Conclusively, the volume based waste charge system should be remarkable system in terms of resources recycling as well as wastes reduction. Above all in order to conform this system the separate collection system should be systematically performed, the next improvable proposal of the detailed methods in this system should be prepared.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.358-366
• /
• 2012

LED-ID (Light Emitting Diode - Identification) is one of the key technologies for identification, data transmission, and illumination simultaneously. This is the new paradigm in the identification technology environment. There are many issues are still now challenging to achieve high performance in LED-ID system. Collision issue is one of them. Actually this is the most significant issue in all identification system. LED-ID system also suffers from collision problem. In our system, collision occurs when two or more readers transmit data to tag at the same time or vice versa. There are many anti-collision protocols to resolve this problem; such as: Slotted ALOHA, Basic Frame Slotted ALOHA, Query Tree, Tree Splitting, and Q-Algorithm etc. In this paper, we propose modified Q-Algorithm to resolve collision at tag. The proposed protocol is based on Q-Algorithm and used the information of arrived readers to a tag from neighbor. The information includes transmitting slot number of readers and the number of readers that can be arrived in next slot. Our proposed protocol can reduce the numbers of collision slot and the successful time to identify all readers. In this paper our simulation and theoretical results are presented.