• 유통과학연구
• /
• 제17권6호
• /
• pp.85-90
• /
• 2019

Purpose - In China, electric vehicle industry has been increased attention as a environmental friendly transportation to solve pollution problems, and still growing to solve a technological gap issues in automobile industry. Although the interest of electric vehicle is getting bigger, there are not many studies that showing consumers' intention to purchase an electric vehicle. Because of this phenomenon, this study tried to find the factors which can affect the purchase intention of electric vehicle. Research design, data, and methodology - Drawing on the Planned Behavior Theory(TPB), this study examined attitude toward the behavior, subjective norm of environmental protection, and the influence of economic benefits on purchase intention through survey. we measure 233 Chinese samples. Results - The results showed that attitude toward electric vehicles, subjective norms of environmental protection, and economic benefits had a significant effect on purchase intention. To be specific, the consciousness of environmental protection, economic considerations, product image and its characteristic are all considerable aspects from the standpoint of Chinese consumers. In addition, we found that the higher the age group, the weaker relationship between attitude toward electric vehicle and purchase intention. Conclusion - This study suggests that diverse factors related to the purchase intention of electric car in China market and Chinese consumers. Especially, economic benefit factors, which have a statistically significant and significant influence on the purchase intention of electric vehicles, are not significant variables in the existing electric vehicle research. This result is considered to be the result of the fact that the electric vehicle is not only an automobile having an environmentally friendly factor but also a product which makes it consider the economic situation. Put together, the results of this paper give us the theoretical basis for establishing an electric vehicle marketing strategy in the rapidly changing Chinese market. Also, this paper will provide new ventures for marketing and distribution strategies for Korean companies that are looking to expand into China.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.864-865
• /
• 2011

Battery Disconnecting System (BDS) is the important equipment in electric vehicle system. Therefore, most of electric vehicle companies, i.e. Hyundai Motors, Renault Motors, General Motors, want to have the reliability of 15 years - 150, 000 miles. Recently, reliability prediction through Siemens Norm SN 29500 is considered without testing. In this paper, we will introduce the standard and various input parameters. Also the case study will be shown for BDS. Prediction model is constructed by listing all the components of BDS. It calculates the $\pi$ factors for each components using the conversion equation in the standard and converts the reference failure rates to the expected operating failure rates. According to the result, the parts which will be improved are EV-Relays.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.451-457
• /
• 2023

Global warming is causing abnormal climates such as floods, droughts, and typhoons all over the world. According to some scientists, carbon dioxide emitted from automobiles is the main cause of global warming. To cope with this, each country is making efforts to replace the existing fossil fuel-powered engine-driven cars with electric vehicles. In order to commercialize small electric vehicles in Korea, it is necessary to solve many problems such as improvement of hill climbing capacity and improvement of power performance. In this study, we propose a proprietary model for a continuously variable transmission(CVT) of a small electric vehicle that can be operated on hills, in which a spring is mounted on a driving pulley and a driven pulley. A prototype of the CVT model using a spring was manufactured and attached to a small electric vehicle body.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.742-751
• /
• 2018

Electric vehicles (EV) are emerging as the future transportation vehicle reflecting their potential safe environmental advantages. Vehicle to Grid (V2G) system describes the hybrid system in which the EV can communicate with the utility grid and the energy flows with insignificant effect between the utility grid and the EV. The paper presents an optimal power control and energy management strategy for Plug-In Electric Vehicle (PEV) charging stations using Wind-PV-FC-Battery renewable energy sources. The energy management optimization is structured and solved using Multi-Objective Particle Swarm Optimization (MOPSO) to determine and distribute at each time step the charging power among all accessible vehicles. The Model-Based Predictive (MPC) control strategy is used to plan PEV charging energy to increase the utilization of the wind, the FC and solar energy, decrease power taken from the power grid, and fulfil the charging power requirement of all vehicles. Desired features for EV battery chargers such as the near unity power factor with negligible harmonics for the ac source, well-regulated charging current for the battery, maximum output power, high efficiency, and high reliability are fully confirmed by the proposed solution.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.136-145
• /
• 2013

It is very important to determine specifications of components included in the drive-train of vehicles at the initial design stage. In this study, component sizing process and performance analysis for Extended-Range Electric Vehicles (E-REV) are discussed based on the foundation of determined system configuration and performance target. This process shows sizing results of an electric driving motor, a final drive gear ratio and a battery capacity for target performance including All Electric Range (AER) limit. For E-REV driving mode, the constant output power of a Gen-set (Engine+Generator) is analyzed in order to sustain State of Charge (SOC) of the battery system.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 춘계학술강연 및 발표대회
• /
• pp.7-7
• /
• 2002

Recently social demand to achieve low fuel consumption and clean emission requires the development of new generation vehicle beyond the conventional vehicle concept. In this point, new generation vehicle is newly designed as electric vehicle, hybrid electric vehicle, fuel cell electric vehicle or 3 liter car etc. In order to develop new generation vehicle, it is very important to develop new materials and process technologies now. In this paper these new technologies are presented focusing on weight reduction specially. Steel body can be achieved 20-25% weight reduction by adoption of high strength steel and new process technologies, i.e tailored blank and hydroforming. Aluminium body can be achieved 40-50% weigt down by use of all aluminium monocoque body or aluminium space frame with aluminium panel. Plasitic composite body can be achieved 30% weight reduction comparing with conventional steel body.

• 무역학회지
• /
• 제47권5호
• /
• pp.1-20
• /
• 2022

As a part of environmental pollution mitigation in China, the number of environmentally friendly vehicles in China is proliferating, attention to vehicles that use environmentally friendly energy continues to increase, and China's new energy vehicle market is also growing rapidly. Similar to existing research, the focus of the subsidy is to provide financial support for electric vehicle buyers and the expansion of new energy vehicle charging infrastructure. Under these circumstances, this study attempts to understand the influence of Chinese consumers' green responsibility and other psychological factors on electronic vehicle purchase intention based on norm activation theory and theory of planned behavior. PLS-SEM examined the proposed hypotheses with 369 valid Chinese consumers, and all were supported. Our findings contribute to the extension of the research scope of Chinese consumers' intention to purchase electric vehicles and provide practical information for domestic and foreign firms entering China, the world's largest electric vehicle market.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.78-81
• /
• 2011

Generally, vehicle is insulated from the earth by rubber tire which is intrinsically the insulation material. The electrical ground of vehicle was floated in the sense of electric potential over the electric power sources. First of all, the floated electrical ground of vehicle should be equipotentially connected with the (-) line of electrical equipment. Bimodal tram has the different kinds of electric system. They must be kept insulated to each other electrically. When there is some unbalanced event or connection between them, it will invoke some errors or breakdown to electrical devices including sensors and actuators. This paper has investigated the floating ground effect of bimodal tram built with composite body and shown the effect according to the unbalanced ground of vehicle and the connection between different electric systems.

• International Journal of Automotive Technology
• /
• 제1권1호
• /
• pp.9-16
• /
• 2000

The growing concerns on environmental protection have been constantly demanding cleaner and more energy efficient vehicles without compromising any conveniences provided by the conventional vehicles. The recent significant advances in proton-exchange-membrane (PEM) fuel cell technology have shown the possibility of developing such vehicles powered by fuel cells. Several prototype fuel cell electric vehicles (FCEV) have been already developed by several major automotive manufactures, and all of the favorable features have been demonstrated in the public roads. FCEV is essentially a zero emission vehicle and allows to overcome the range limitation of the current battery electric vehicles. Being motivated by the laboratory and field demonstrations of the fuel cell technologies, variety of fuel cell alliances between fuel cell developers, automotive manufactures, petroleum companies and government agencies have been formed to expedite the realization of commercially viable FCEV. However, there still remain major issues that need to be overcome before it can be fully accepted by consumers. This paper describes the current fuel cell vehicle development status and the staggering challenges for the successful introduction of consumer acceptable FCEVS.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.94-100
• /
• 2004

Most power steering systems obtain the power by a hydraulic mechanism. Therefore, it consumes more energy because the oil power should be sustained all the times. Recently, to solve this problem the electric power system has been developed and become widely equipped in passenger vehicles. In this research the simulation integration technique for an electric power steering system with MATLAB/SIMULINK and a full vehicle model with ADAMS has been developed. A full vehicle model interacted with electronic control unit algorithm is concurrently simulated with an impulsive steering wheel torque input. The dynamic responses of vehicle chassis and steering system are evaluated. This integrated method allows engineers to reduce the prototype testing cost and to shorten the developing period.