• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2279-2286
• /
• 2012

The template synthesis of copper(II) and nickel(II) complexes derived from 2,6-diformyl-4-methylphenol with diethylenetriamine or 1,2-bis(3-aminopropylamino)ethane produce the 12-membered $N_3O$ and 17-membered $N_4O$ macrocyclic complexes, respectively. The geometry of the complexes has been determined with the help of electronic and EPR spectroscopic values and found to be five coordinated square pyramidal and, six coordinated distorted tetragonal for 12-membered and 17-membered macrocyclic complexes, respectively. Electrochemical studies of the mononuclear $N_3O$ and $N_4O$ copper(II) complexes show one irreversible oneelectron reduction wave at $E_{pc}=-1.35$ and -1.15 V respectively, and the corresponding nickel(II) complexes show irreversible one-electron reduction wave at $E_{pc}=-1.25$ and -1.22 V, respectively. The nickel(II) complexes show irreversible one-electron oxidation wave at $E_{pa}=+0.84$ and +0.82 V, respectively. All the complexes were evaluated for in vitro antimicrobial activity against the human pathogenic bacteria and fungi.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.49-62
• /
• 1994

An analysis method for the time-dependent nonlinear analysis of segmentally erected planar prestressed concrete cable-stayed bridges was described. To account for the time-dependent effects, load history, creep, shrinkage. aging of concrete and relaxation of prestress were considered. Changes in boundary conditions and loads, installing and removing frame elements, stressing, restressing and removing cables and prestressing tendons were incorporated for modeling segmental erection operations. One typical example on segmentally erected prestressed concrete cable-stayed bridge was presented to illustrate the analysis method. Results of this example show that it is important to follow the development of stresses and deformations at all stages of construction to predict the true response of the bridge through its various load history.

• Progress in Medical Physics
• /
• v.6 no.2
• /
• pp.93-101
• /
• 1995

In this paper, we implemented a digital medical image management and a remote monitor display system for a personal computer. The designed system can display up to a 1280${\times}$1024 image which can accomodate eight images with a 256${\times}$256${\times}$8bits. When one of these images is clicked by the mouse, the selected image can be displayed with 256${\times}$256${\times}$8bits or 1024${\times}$1024${\times}$8bits. For the selected image, we can use one of the image processing functions in this system and send it to a remote monitor for the close examinations. To search and store digital images effectively, we constructed and image database management system with the B＋TREE structure. This system can be operated in an IBM-PC 386 or higher and all the function are performed easily with a mouse to provide a user firendly environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1571-1576
• /
• 2005

DCS has many processing components and various communication elements. And its communication delay characteristic is affected diverse operating situation and context. Especially, binding signal which traversed from one control-node to another control-node undergo all sort of delay conditions. So its delay value has large deviation with the lapse of time, and the measurement of delay statistics during long time is very difficult by using general oscilloscope or other normal instruments. This thesis introduces the design and implementation of PC-based BDAS(Binding Delay Analysis System) System developed to overcomes these hardships. The system has signal-generator, IO-card, data-acquisition module, delay-calculation and analyzer module, those are implemented on industrial standard PC/Ethernet hardware and Windows/Linux platforms. This system can detect accurate whole-system-wide delay time including io, control processing and network delay, in the resolution of msec unit, and can analyze each channel's delay-historic data which is maintained by realtime database. So, this system has strong points of open system architecture, for example, user-friendly environment, low cost, high compatibility, simplicity of maintenance and high extension ability. Of all things, the measuring capability of long-time delay-statistics obtained through historic-DB make the system more valuable and useful, which function is essential to analyze accurate delay performance of DCS system. Using this system, the verification of delay performance of DCS for nuclear power plants is succeeded in KNICS(Korea Nuclear Instrumentation & Control System) projects

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.6
• /
• pp.10-16
• /
• 1994

In case of off-line character recognition with statistical method, the character recognition speed for Korean or Chinese characters is slow since the amount of calculation is huge. To improve this problem, we seperate the recognition steps into several functional stages and implement them with hardwares for each stage so that all the stages can be processed with pipline structure. In accordance with temporal parallel processing, a high speed character recognition system can be implemented. In this paper, we implement a classification hardware, which is one of the several functional stages, to improve the speed by parallel structure with multiple DSPs(Digital Signal Processors). Also, it is designed to be able to expand DSP boards in parallel to make processing faster as much as we wish. We implement the hardware as an add-on board in IBM-PC, and the result of experiment is that it can process about 47-times and 71-times faster with 2 DSPs and 3 DSPs respectively than the IBM-PC(486D$\times$2-66MHz). The effectiveness is proved by developing a high speed OCR(Optical Character Recognizer).

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.299-305
• /
• 2021

Dissolved oxygen, pH, and temperature are the most important factors for fish farming because they affect fish growth and mass mortality of the fish. Therefore, fish farm workers must always check all pools on the farm, but this is very difficult in reality. That's why we developed a control system for smart fish farms. This system includes a gateway, sensor gatherers, and a PC program using LabVIEW. One sensor gatherer can cover up to four pools. The sensor gatherers are connected to the gateway in the form of a bus. For the gateway, the ATmega2560 is used as the main processor for communication and the STM32F429 is used as a sub-processor for displaying LCD. For the sensor gatherer, ATmega2560 is used as the main processor for communication. MQTT (Message Queuing Telemetry Transport), RS-485, and Zigbee are used as the communication protocols in the control system. The users can control the temperature and the dissolved oxygen using the PC program. The commands are transferred from the PC program to the gateway through the MQTT protocol. When the gateway gets the commands, it transfers the commands to the appropriate sensor gatherer through RS-485 and Zigbee.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.2
• /
• pp.87-94
• /
• 2009

There are several types of compressors which are appropriate for hydrogen gas station. Diaphragm type of compressor is the one of them and it satisfies the requirements for that purpose in terms of maintaining gas purity and making high pressure over 700 bar. The objective of this study is to find an optimal design of oil distribution hole configuration. The number of holes is changed maintaining total cross-sectional area of holes. Five cases(1 hole, 4, 8,16 and 24 holes) were studied through Fluid Structure Interaction(FSI) analysis method. Gas and oil pressure, the deflection and stress of the diaphragm were analysed during compression and suction process respectively. There is no specific difference among the cases during compression. An additional deflection due to the existence of hole was found during suction for all case. But the highest deflection and stress were found in the 1 hole case. It was seen that 60% decrease of stress in magnitude in 24 hole case compare to the 1 hole case.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.1
• /
• pp.37-44
• /
• 2017

While IoT (Internet of Things) industry has been spreading, it becomes very important for object to recognize user's information by itself without any control. Above all, gender (male, female) is dominant factor to analyze user's information on account of social and biological difference between male and female. However since each gender consists of diverse face feature, face-based gender classification research is still in challengeable research field. Also to apply gender classification system to IoT, size of device should be reduced and device should be operated with low power. Consequently, To port the function that can classify gender in real-world, this paper contributes two things. The first one is new gender classification algorithm based on deep learning and the second one is to implement real-time gender classification system in embedded board operated by low power. In our experiment, we measured frame per second for gender classification processing and power consumption in PC circumstance and mobile GPU circumstance. Therefore we verified that gender classification system based on deep learning works well with low power in mobile GPU circumstance comparing to in PC circumstance.

• Animal Bioscience
• /
• v.36 no.11
• /
• pp.1632-1646
• /
• 2023

Objective: The objective of the present study was to investigate the effect of dietary betaine (BT) supplementation on the hepatic transcriptome profiles in broiler chickens raised under heat stress (HS) conditions. Methods: A total of 180 (21-d-old) Ross 308 male broiler chicks were allotted to 1 of 3 treatment groups with 6 replicated cages in a completely randomized design. One group was kept under thermoneutral conditions at all times and was fed a basal diet (PC). Other 2 groups were exposed to a cyclic heat stress condition. One of the 2 groups under heat stress conditions was fed the basal diet as a negative control (NC), whereas the other group was fed the basal diet supplemented with 0.2% BT. All chickens were provided with diets and water ad libitum for 21 d. Following the experiment, the liver samples were collected for RNA sequencing analysis. Results: Broiler chickens in NC and BT group had decreased (p<0.05) growth performance. In the transcriptome analysis, the number of differentially expressed genes were identified in the liver by HS conditions and dietary BT supplementation. In the comparison between NC and PC treatments, genes related to energy and nucleic acid metabolism, amino acid metabolism, and immune system were altered by HS, which support the reason why heat-stressed poultry had decreased growth performance. In the comparison between NC and BT treatments, genes related to lipid metabolism, carbohydrate metabolism, and immune system were differently expressed under HS conditions. Conclusion: HS negatively impacts various physiological processes, including DNA replication, metabolism of amino acids, lipids, and carbohydrates, and cell cycle progression in broiler chickens. Dietary BT supplementation, however, offers potential counteractive effects by modulating liver function, facilitating gluconeogenesis, and enhancing immune systems. These findings provide a basis for understanding molecular responses by HS and the possible benefits of dietary BT supplementation in broiler chickens exposed to HS.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.9
• /
• pp.1188-1194
• /
• 2000

Objective : Internal carotid-posterior communicating artery(IC-PC) aneurysms can be clipped easily without any special preparations. Occasionally, however, it is difficult to clip the low-lying IC-PC aneurysms without some kinds of additional procedures. Clinical Material and Methods : We experienced four cases of low-lying IC-PC aneurysms, which the intradural anterior clinoidectomy and/or anterior petroclinoid fold(APF) resection was essential to expose the proximal side of the aneurysmal neck and/or proximal control. One patient harbored two low-lying IC-PC aneurysms bilaterally. The patients were divided into two groups according to the necessity of anterior clinoidectomy : Group I(n=4) that needed an intradural clinoidectomy and/or APF resection and Group II(n=29) that had IC-PC aneurysms, easily clipped without any special preparation. Also, various radiometric parameters were measured through the preoperative angiograms. Results : The incidence of such aneurysms was 12% among a total of thirty-three surgically treated IC-PC aneurysms during lasr 3 years. Among four cases, three cases presented with subarachnoid hemorrhage and all aneurysmal sac projected to postero-inferior direction. In our study, We initially considered the necessity of intraoperative anterior clinoid process(ACP) removal and/or resection of APF in cases of shorter distance less than 5.6mm between the proximal aneurysmal sac and tip of the ACP(p<0.001), and the proximal portion of aneurysmal neck has located below the interclinoid line(p=0.001). Conclusion : Through a careful preoperative evaluation, some radiometric parameters can be used to determine whether the ACP should be removed in clipping of the low-lying IC-PC aneurysms. Unlike to total removal of the ACP, the intradural partial anterior clinolidectomy and/or APF resection, which are more familiar to surgeons, reduce the risks of the premature rupture, operative time, and also contribute a more precise clip placement with proximal control than the extradural clinoidectomy.