• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.804-809
• /
• 2015

Since Korea is home to Reticulitermes speratus, a kind of subterranean termites that prefer dark and humid conditions, there have been increasing damages to wooden structures by termites. One noticeable attribute of Korean subterranean termites is that they prefer than Pinus densiflora, the major construction material for Korean traditional houses. And because wide varieties of termites are distributed all over the world, it is not so easy to choose appropriate control methods depending on specific areas. This necessitates careful applications of the following control methods depending on the kinds of termites: fumigation treatment, soil termiticide, preservatives and insect treatment, termite colony elimination system, chemical treatment, and other physical and biological treatment methods. The purpose of this study is to investigate the control effects of environmentally-friendly Alkaline copper quaternary (ACQ), Copper Azole (CuAZ) and Micronized copper quarter (MCQ) on the termites contributing to the damage of wooden structures. It was found in this study that wood with preservative treatment produced a significantly higher termicidal efficacy than untreated wood.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.641-651
• /
• 2015

The aim of this study was to estimate the service life of alkaline copper quaternary (ACQ)-treated wood. The service life of preservative-treated wood was estimated by comparing a residual quantity of ACQ in wood with toxic threshold to fungi. Indoor and outdoor leaching tests were carried out in order to predict residual ACQ quantity within wood. As a result, the leaching ratio of ACQ from treated wood above ground via precipitation was 18.1% for 50 years. When the H4 treated wood, which is traditionally used in contact with the ground and fresh water, is used above-ground, the leaching ratio of ACQ for 50 years is 18.1% and the residual quantity of ACQ is $4.2kg/m^3$, which is higher than the toxic threshold of ACQ. Thus, the H4 treated wood used above-ground will be resistant to biodeterioration for at least 50 years.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.253-259
• /
• 2018

To determine the depth of preservative penetration in ACQ treated wood, the degree of penetration of Cu was measured. In this study, we developed a DDAC coloring method to investigate the penetration depth of DDAC, which is one of the active ingredient of ACQ, into wood. The following conclusions were obtained. The DDAC component reacts with a 2', 7'-dichlorofluorescein indicator and results in a deep orange color. This orange coloring reaction appears not only in DDAC solutions but also in ACQ treated wood tissues in which DDAC is present. It is possible to visually verify that DDAC has better wood penetration than Cu in the spruce, which is an refractory wood species, by the DDAC coloring method developed this study. In addition to the results, it is necessary to investigate the difference in penetration of Cu and DDAC for other wood species with poor preservative penetration.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.544-558
• /
• 2017

The objective of this research is to investigate preservative efficacy for refractory species in field tests. The field tests were set up to evaluate the preservative performance of western hemlock and white spruce preservative-treated to the residential products group C and D of Canadian standard (CSA O80 Series-08) that have been developed for residential use in above-ground and ground-contact conditions, respectively. They were incised and pressure-treated with alkaline copper quaternary (ACQ) or copper azole (CA). Treated samples for the ground contact stake test and ground proximity test were installed in Jinju, Korea on November 2010 according to AWPA E7-09 and AWPA E18-06, respectively. Each sample has been annually assigned ratings for decay and termite attack, based on AWPA E7 grading system. After six years and five months of exposure, the untreated samples showed decay and particularly severe damage by termite attack but all the preservative-treated samples showed no decay. The results showed that the 5-mm penetration depths may be applicable for the treatment of refractory species. This paper discusses what to consider for the use of refractory species in Korean wood preservation industry from the penetration and retention points of view.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.491-498
• /
• 2014

In order to obtain basic data for concentration control of alkaline copper quat (ACQ) solution in wood preservative treatment, this study investigates the change of concentration and adsorption of treating solution and active ingredient, copper oxide (CuO) and didecyldimethyl ammonium chloride (DDAC), in the process of recycling of ACQ solution. Japanese larch (Larix leptolepis), Douglas-fir (Psedotsuga menziesii) and Radiata pine (Pinus radiata) were treated with ACQ solution. The active ingredient concentration of ACQ solution was decreased continuously with increase of recycling. There are differences between extent of concentration decrease of Cu (as CuO) and DDAC. DDAC was decreased more quickly and to a higher degree than Cu for all recycling. The extent of DDAC concentration decrease was remarkable than that of Cu for wood species. The amount of DDAC adsorbed into wood decreased with the increase of ACQ solution recycling, but adsorption of Cu was little difference regardless of recycling. The adsorption of Cu into wood increased as DDAC concentration decrease by recycling of ACQ solution. This is likely due to decrease of DDAC competition with Cu for the same reaction site in wood.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.504-510
• /
• 2015

This research was performed to evaluate soil contamination caused by copper depleted from ACQ-treated wood. Three years after the exposure of ACQ-treated wood in the field test sites, soil samples around the treated wood were collected and analyzed for the copper amount and distribution through soil. Soils around the deck posts installed in five different neighborhood parks located in Chonnam and Gyeongnam were investigated for copper contents. The results of the field test showed that the amount of copper leached from the end surface of treated wood buried under soil was more than 1.5 times the copper amount leached from the lateral surfaces, and the mobility of copper was very restricted in soil. The copper contents of soil within 10 cm from the treated deck posts installed in the parks showed to be less than 500 mg/kg, which are the limit values of the 2nd region set up by enforcement regulation of soil environment conservation act. The distribution ranges of copper in soil from the treated wood set up in the field test sites seemed to be much wider than those from deck posts, which may explained by the fact that the retentions of the treated samples used in the field test sites were much higher than those of the deck posts.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.245-254
• /
• 2009

As a substitute for CCA, which is inhibited due to its environmental pollution and human harmfulness, and CuAz and ACQ with a high cost, okara-based wood preservatives were formulated with okara hydrolyzates using copper sulfate and/or borax as a metal salt. The efficacy of the preservatives and X-ray microanalysis of wood specimens treated with the preservatives were examined to confirm the potential of the okara-based wood preservatives. Most of the preservatives showed excellent decay resistance against brown-rot fungi, Postia placenta and Gloeophyllum trabeum. The efficacy was improved when the acid concentration and temperature used for the hydrolysis of okara increased. In addition, when borax was added into copper sulfate/okara hydrolyzates preservative formulations, any decay was not found in the specimens. From the microscopic observation of the specimens treated with okara-based wood preservatives, it seems that okara is contributed to the fixing of metal salts in wood blocks. Therefore, it is speculated that okara-based wood preservatives can effectively protect wood against fungal attack as CuAz, and that the preservatives are sufficient to use as an alternative wood preservative of CCA, ACQ and CuAz.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.743-749
• /
• 2016

The concentration control of wood preservatives is necessary to produce a preservative treated wood having a uniform quality. Concentration measurement method of wood preservatives to be easily used in the field has not been developed yet. This study examined the way to estimate the concentration from turbidity of ACQ wood preservative that can be relatively easily measured by using a portable turbidity meter. The addition of phosphoric acid solution in an alkaline ACQ solution having a very low turbidity is created a suspension of the white substance and the turbidity suddenly increased. The optimum amount of addition of the phosphoric acid solution is until the pH of ACQ solution reaches 7, the turbidity of the ACQ solution reaches maximum value. Excessive addition of the phosphoric acid solution results in a turbidity decrease with acidification of the ACQ solution. Also ACQ solution becomes transparent. The high significance was recognized with positive correlation between the concentration and the turbidity of the ACQ solution. From the t-test, The significant difference between the actually measured concentrations and the concentrations predicted by the regression equation for industrial ACQ solutions was not recognized. Thus, it was possible to know that concentration prediction and control of industrial ACQ solution using the turbidity and a regression equation. Therefore, using the regression equation and turbidity is expected to be able to management the concentration of ACQ solution in the industrial field.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.265-273
• /
• 2015

In general, when wood products are used outdoors for a certain period of time the surface color of wood changes due to light, water, heat and so on. This color change can be considered importantly for the product's market value. In this study, the color change of ACQ (Alkaline Copper Quaternary) and CBHDO (CuO $H_3BO_3$ N-cyclohexyldiazenium-anion) treated wood and untreated wood was investigated during 2-year weathering test. From this experimental study, it was found that the colors of the treated wood changed more reddish and yellowish from green. Meanwhile, the untreated wood turned to grey color rapidly. Also, the color of the treated wood in short-term exposure changed closer to the inherent color of the fresh natural wood than that of the untreated woods.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.110-123
• /
• 2008

The use of CCA as a wood preservative was recently inhibited due to its environmental pollution and human harmfulness. Instead of CCA, copper azole (CuAz) and alkaline copper quaternary (ACQ) have been used as alternative wood preservatives, but the price of the preservatives is much more expensive than that of CCA. As a substitute for high-priced CuAz and ACQ, environmentally friendly wood preservatives were formulated with okara, which is an organic waste from the production of tofu. Prior to formulating the preservatives, okara was hydrolyzed by three levels of sulfuric acid concentration (1, 2.5 and 5%) to easily penetrate the effective components of the preservatives into wood blocks. Final preservative solutions were formulated with the hydrolyzed okara and metal salts, such as copper sulfate, copper chloride and borax. The preservatives were treated into wood blocks by vacuum-pressure method to measure the treatability of the preservatives, and the treated wood blocks were placed in hot water for three days to measure the leachability of the preservatives. The effective components of the preservatives might be successfully penetrated into wood blocks through the uses of hydrolyzed okara and ammonia water. However, the leached amount of effective components was increased as the concentration of acid used for the hydrolysis of okara increased. The treatability and leachability of the preservatives were not affected by hydrolysis temperature but negatively affected by the addition of borax. Based on the results above, the optimal conditions for formulating okara-based wood preservatives cost-effectively and environmentally might be 1% acid hydrolysis of okara and the use of $CuCl_2$ as a metal salt. In addition, the treatability and leachability of okara-based wood preservatives were superior or no differences comparing with those of CuAz. Therefore, it is concluded that okara-based wood preservatives might have a potential to be used as an environmentally friendly wood preservative.