• 한국결정성장학회지
• /
• 제20권4호
• /
• pp.192-196
• /
• 2010

일반 포틀랜드 시멘트 콘크리트에 개질 유황 고분자가 혼입되었을 때의 압축강도 및 내염기성의 영향을 일반 포틀랜드 시멘트 콘크리트와 비교하여 나타내었다. 개질 유황이 혼입된 콘크리트는 일반 콘크리트에 비해 매우 큰 강도를 나타내었고, $55^{\circ}C$에서 배합 및 혼합 작업하였을 때 안정적으로 공시체의 제작이 가능하였다. 13%의 $CaCl_2$에 개질 유황이 혼입된 콘크리트 공시체를 침지되어 내염기성을 평가하였다. 내염기성 시험에서, 개질 유황이 혼입된 콘크리트는 $CaCl_2$에 대한 저항성은 일반 콘크리트에 비해 증가하였다.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.351-358
• /
• 2011

It was researched to be alternative of TGIC type hardener with human hazard element as PT 910 mix powder paint with hardener. Generally PT 910 was compared with TGIC & Epoxy resin of hardener to be used at thermosetting powder paint. We inquired a property of matter for paint through Gel time, glass transition temperature, melting point and a property of matter for film through a property of adhesion, a property of tolerance, softness, gloss, acid-resistant, alkali-resistant, salt water spray-resistant, facilitation climatic. When PT 910 is used of hardener, it was shown the excellent results in gel time, softness, salt water spray-resistant, fracilitation climatic and the similar results in melting point, a property of tolerance, a property of adhesion, gloss, acid-resistant, alkali-resistant, as compared with the powder paint used by TGIC hardener. The glass transition temperature was little low. But there was slightly different results. After the study results, we reached the conclusion that thermosetting powder used by PT 910 is alterative to by TGIC hardener.

• 한국산림과학회지
• /
• 제11권1호
• /
• pp.1-24
• /
• 1970

본(本) 실험(實驗)은 우리나라 주요조림수종(主要造林樹種)인 해송, 소나무, 리기다소나무, 잣나무, 낙엽송, 전나무에 대하여 토양(土壤) pH에 따른 영양흡수동태(營養吸收動態)와 내산도(耐酸度)를 밝히기 위하여 인공적(人工的)으로 pH를 조절(調節)한 사경배지(砂耕培地)에서의 N, P, K, Ca 및 Fe의 흡수동태(吸收動態)와 내산도(耐酸度)를 검토(檢討)하였다. 1. 강산성역(强酸性域)에서의 영양흡수동태(營養吸收動態)를 pH 3구(區)를 기준(基準)으로 건물증가율(乾物增加率)로서 보면 리기다소나무>소나무>해송 이었고 따라서 내산도(耐酸度)도 같은 순위(順位)라고 할 수 있다. 2. 알카리성역(性域)인 pH 9구(區)에서의 영양흡수동태(營養吸收動態)를 건물증가율(乾物增加率)로서 보면 해송>리기다소나무>소나무>잣나무>전나무>낙엽송이었음으로 내(耐)알카리 도(度)도 같은 순위(順位)라고 할 수 있다. 3. 본(本) 실험(實驗)에서 K와 Ca의 흡수동태(吸收動態)로 보아 그 흡수동태(吸收動態)로서 내산도(耐酸度)를 판정(判定)할 수 있으며 흡수량(吸收量)이 K>Ca이면 내산성(耐酸性)이 강(强)하고 K

• Journal of Microbiology and Biotechnology
• /
• 제11권3호
• /
• pp.534-538
• /
• 2001

The xynA gene encoding an alikali-tolerant endo-1,4-${\beta}$-xylanase (XYN) was cloned from the alkalophilic Bacillus pumilus A-30. The nucleotide sequence of a 974-bp DNA fragment containing the xynA was determined. An ORF of 684 nucleotides that encoded a protein of 228 amino aicds was detected. Asparagine-71 of XYN from B. Pumilus A-30 showed to be highly conservative in alkaline xylanases of family G/11, upon comparing the amino acid sequences of 17 family G/11 xylanases. Site-directed mutation of N71D of the xynA gene resulted in a decrease of 12.4% in the specific acitivity and a significant decline in the enzyme activity in the alkaline pH range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.421-421
• /
• 2008

Generally, the polymer thick-film resistors for embedded organic or hybrid substrate are patterned by screen printing so that the accuracy of resistor pattern is not good and the tolerance of resistance is too high(${\pm}$20~30%). To reform these demerits, a method using Fodel$^{(R)}$ technology, which is the patterning method using a photosensitive resin to be developable by aqueous alkali-solution as a base polymer for thick-film pastes, was recently incorporated for the patterning of thermosetting thick-film resistor paste. Alkali-solution developable photosensitive resin system has a merit that the precise patterns can be obtained by UV exposure and aqueous development, so the essential point is to get the composition similar to PSR(photo solder resist) used for PCB process. In present research, we made the photopatternable resistor pastes using 8 kinds of epoxy acrylates and a conductive carbonblack (CDX-7055 Ultra), evaluated their developing performance, and then measured the resistance after final curing. To become developable by alkali-solution, epoxy acrylate oligomers with carboxyl group were prepared. Test coupons were fabricated by patterning copper foil on FR-4 CCL board, plating Ni/Au on the patterned copper electrode, applying the resistor paste on the board, exposing the applied paste to UV through Cr mask with resistor patterns, developing the exposed paste with aqueous alkali-solution (1wt% $Na_2CO_3$), drying the patterned paste at $80^{\circ}C$ oven, and then curing it at $200^{\circ}C$ during 1 hour. As a result, some test compositions couldn't be developed according to the kind of oligomer and, in the developed compositions, the measured resistance showed different results depending on the paste compositions though they had the same amount of carbonblack.

• 공업화학
• /
• 제21권4호
• /
• pp.411-416
• /
• 2010

본 연구에서는 알칼리 현상형 감광성 수지재료와 전도성 카본블랙을 이용하여 만들어진 감광성 폴리머 저항 페이스트를 이용하여 후막저항체의 허용편차(tolerance)를 개선하고자 하였다. 먼저 카본블랙과 감광성 수지의 선택이 폴리머 후막저항(polymer thick film resistor, PTFR)의 저항값의 범위와 허용편차의 수준에 미치는 영향을 조사하였다. 이후 테스트 기판상에 감광성 저항 페이스트를 도포하는 방법에 따른 저항값 허용편차의 차이를 평가하였다. 감광성 저항 페이스트를 스크린 인쇄를 이용하여 테스트 기판의 전면에 도포한 경우에는 테스트 기판상에서 균일한 두께의 후막을 형성하기 어렵기 때문에 위치에 따른 저항값의 허용편차가 크게 나타났다. 반면, 롤러를 이용하여 페이스트를 도포하였을 때, 전체 기판 면적에 균일한 두께의 저항체 후막을 형성할 수 있었으며, 저항값 평가 결과 ${\pm}10%$ 이내의 낮은 허용편차를 나타내었다. 포토공정을 이용한 정밀한 패터닝 공정과 롤러를 이용한 균일한 두께의 저항막 도포 공정을 결합함으로써 후막저항의 허용편차를 개선할 수 있었다.

• BMB Reports
• /
• 제41권6호
• /
• pp.448-454
• /
• 2008

Two full-length cDNAs, PutPMP3-1 and PutPMP3-2, encoding PMP3 family proteins were isolated from Puccinellia tenuiflora, a monocotyledonous halophyte. Expression of both genes was induced by low temperature, salt stress, dehydration, ABA, and $NaHCO_3$. Transcripts of PutPMP3-2 were more strongly induced by these stresses relative to those of PutPMP3-1, particularly under low temperature and dehydration conditions. Expression of PutPMP3-1 and PutPMP3-2 in yeast mutants lacking the PMP3 gene can functionally complement the membrane hyper-polarization and salt sensitivity phenotypes resulting from PMP3 deletion. To compare the functions of PutPMP3-1 and PutPMP3-2, the orthologous genes in rice (OsLti6a and OsLti6b) were isolated. Both OsLti6a and OsLti6b could functionally complement the loss of PMP3 in yeast. PutPMP3-2 and OsLti6a were more effective in reversing membrane hyperpolarization than PutPMP3-1 and OsLti6b. However, the four yeast transformants each showed similar levels of salt tolerance. These results imply that these PMP3 family members don't function identically under different stress tolerance conditions.

• International Journal of Oral Biology
• /
• 제44권2호
• /
• pp.31-36
• /
• 2019

Streptococcus mutans is one of the important bacteria that forms dental biofilm and cause dental caries. Virulence genes in S. mutans can be classified into the genes involved in bacterial adhesion, extracellular polysaccharide formation, biofilm formation, sugar uptake and metabolism, acid tolerance, and regulation. The genes involved in bacterial adhesion are gbps (gbpA, gbpB, and gbpC) and spaP. The gbp genes encode glucan-binding protein (GBP) A, GBP B, and GBP C. The spaP gene encodes cell surface antigen, SpaP. The genes involved in extracellular polysaccharide formation are gtfs (gtfB, gtfC, and gtfD) and ftf, which encode glycosyltransferase (GTF) B, GTF C, and GTF D and fructosyltransferase, respectively. The genes involved in biofilm formation are smu630, relA, and comDE. The smu630 gene is important for biofilm formation. The relA and comDE genes contribute to quorumsensing and biofilm formation. The genes involved in sugar uptake and metabolism are eno, ldh, and relA. The eno gene encodes bacterial enolase, which catalyzes the formation of phosphoenolpyruvate. The ldh gene encodes lactic acid dehydrogenase. The relA gene contributes to the regulation of the glucose phosphotransferase system. The genes related to acid tolerance are atpD, aguD, brpA, and relA. The atpD gene encodes $F_1F_0$-ATPase, a proton pump that discharges $H^+$ from within the bacterium to the outside. The aguD gene encodes agmatine deiminase system and produces alkali to overcome acid stress. The genes involved in regulation are vicR, brpA, and relA.

• Journal of Microbiology and Biotechnology
• /
• 제25권12호
• /
• pp.1971-1976
• /
• 2015

Oceanobacillus kimchii is a member of the genus Oceanobacillus within the family Bacillaceae. Species of the Oceanobacillus possess moderate haloalkaliphilic features and originate from various alkali or salty environments. The haloalkaliphilic characteristics of Oceanobacillus advocate they may have possible uses in biotechnological and industrial applications, such as alkaline enzyme production and biodegradation. This study presents the draft genome sequence of O. kimchii X50^T and its annotation. Furthermore, comparative genomic analysis of O. kimchii X50^T was performed with two previously reported Oceanobacillus genome sequences. The 3,822,411 base-pair genome contains 3,792 protein-coding genes and 80 RNA genes with an average G+C content of 35.18 mol%. The strain carried 67 and 13 predicted genes annotated with transport system and osmoregulation, respectively, which support the tolerance phenotype of the strain in high-alkali and high-salt environments.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3592-3596
• /
• 2011

A novel poly(vinylchloride)-based membrane sensor using $N^1$,$N^3$,$N^5$-tris(2-(2,3-dihydroxybenzylamino)-ethyl)cyclohexane-1,3,5-tricarboxamide (CYCOENCAT, L) as ionophore has been prepared and explored as $Fe^{3+}$ selective electrode. The membrane electrode composed of ionophore, poly(vinylchloride) and o-nitropheyloctyl ether in the optimum ratio 4:33:63 gave excellent potentiometric response characteristics, and displayed a linear log[$Fe^{3+}$] versus EMF response over a wide concentration range of $1.0{\times}10^{-5}-1.0{\times}10^{-1}$ M with super nernstian slope of 28.0 mV/decade and the detection limit of $8.0{\times}10^{-6}$ M. The proposed ion selective electrode showed fast response time (< 15 s), wide pH range (3.0-7.0), high non-aqueous tolerance (up to 20%) and adequate long life time (120 days). It also exhibited very good selectivity for $Fe^{3+}$ relative to a wide variety of alkali, alkaline earth, transition and heavy metal ions. Further, the analytical applicability of the sensor was tested as an indicator electrode in the potentiometric titration of $Fe^{3+}$ with EDTA.