• Journal of the Korean Applied Science and Technology
• /
• v.23 no.2
• /
• pp.169-176
• /
• 2006

Acrylic adhesives for automobiles protection were prepared by emulsion polymerization. Monomers used were n-butyl acrylate(BA), acrylonitrile (AN), butyl methacrylate(BMA), glycidyl methacrylate(GMA), and acrylic acid (AA). Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was kept at 200 rpm. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, when each 0.03 mole of GMA and AA was introduced, the adhesion properties and various above mentioned resistances of the prepared adhesives were satisfied the standard for automobiles.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.4
• /
• pp.67-75
• /
• 1982

모텔리그닌의 펄프화(化) 처리(處理) 및 폐액(廢液)리그닌의 반응생성물(反應生成物)로부터 알칼리 및 설페이트 펄프화중(化中)에 일어나는 반응양식(反應樣式)을 조사(調査)한 것이다. 알칼리의 처리결과(處理結果)는 친핵시약(親核試藥)에 의해 페놀레이트 이온이 생성(生成), 퀴논메타이드 중간체(中間體)를 걸쳐 $C_6-C_3$ 단위(單位)의 ${\alpha}$위(位) aryl은 탈리(脫離)하여, 리그닌은 저분자화(低分子化)가 시작되고, 저분자생성물(低分子生成物)은 축합반응(縮合反應)에 의해 극(極)히 일부(一部)는 고분자화(高分子化)된다. 저분자화(低分子化)된 리그닌은 산화(酸化)에 의해 퀴노이드 착색구조(着色構造)를 형성(形成)한다. 페놀성의 일부(一部) 및 비(非)페놀성리그닌은 oxirane와 thiirane의 중간체(中間體)를 거쳐 $C_6-C_3$ 단위(單位)의 ${\beta}$위(位)의 arylether가 탈리(脫離)된다. 그러나, hydrosulfide 이온은 hydroxide 이용 보다 강(强한)한 친핵종(親核種)이므로 thiirane의 중간체(中間體) 생성(生成)이 용량(容量)하여 개열(開裂)이 더욱 촉진(促進)된다. 저분자(低分子)리그닌의 고분자축합(高分子縮合)은 벤젠핵(核)의 2.6 위(位)보다 5위(位)에 축합(縮合)이 많이 일어 난다.

• Advances in concrete construction
• /
• v.15 no.3
• /
• pp.149-159
• /
• 2023

Water glass (WG) and sodium sulfate (SS) were used to prepare polymeric aluminum chloride residue cement mortar (PACRM) by single and compound blending with polymeric aluminum chloride waste residue, respectively. The structural strength and textural characteristics examinations showed that PACRM consistency increased by incorporating WG, but decreased by incorporating SS. When WG and SS were compounded, the mortar consistency initially rose before falling. The compressive strength of PACRM increased and then decreased as WG was increased. The mechanical properties of PACRM were better enhanced by SS than WG, showing no strength deterioration. The main reason for the improved mechanical properties of polymeric aluminum chloride waste residue in the presence of activators is the increased precipitation of reactive substances, such as C-S-H gels, calcium silica, and Ca(OH)₂. The density of the specimens with PACRM and the degree of aggregation of hydration products were significantly enhanced by generating more hydration products in the mortar. Further, the cracks and pores were significantly reduced, and the matrix structure was continuous and dense at 5% SS doping and 3% compound doping.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.1
• /
• pp.99-106
• /
• 1998

Two kinds of carrageenan were extracted from red seaweeds, Tichocarpus crinitus, collected in The Peter the Great Bay of Russia on August, 1996. One is KC1-insoluble carrageenan and another is KC1-soluble carrageenan. The yield of KC1-insoluble carrageenan was 17.15%, which is composed of 18.06% total sulfate, 5.61% protein, 3.51% K+, 0.49% Na+, 1.66% Ca2+, 54.26% galactose, 4.68% xylose, trace of mannose and glucose. The yield of KC1-soluble carrageenan was 3.52%, which is composed of 24.06% total sulfate, 5.2% protein, 5.32% K+, 0.16% Na+, 2.80% Ca2+, 33.54% galactose, 5.48% xylose, 4.32% mannose, trace of glucose. But rhamnose was not detected in both case. FT-IR spectrum showed that the KC1-insoluble carrageenan was kappa-type carrageenan and that KC1-soluble carrageenan was lambda, iota hybrid-type carrageenan. KC1-insoluble carrageenan was very weakly formation the gel compared with KC1-insoluble carrageenan from other red seaweeds. So we investigated viscosity. Both type carrageenan was stable in the temperature until 9$0^{\circ}C$, 1 hr. The viscosity of the solution of KC1-insoluble carrageenan was increased to about two folds by K+, but was not changed by Ca2+. The viscosity of the solution of KC1-soluble carrageenan was reduced by K+ and Ca2+. Both of them was stabilized in alkali but was reduced in comparison with acid conditions. In this study, both carrageenan was expected as thickening agent than gelling agent for food additives.

• Journal of Energy Engineering
• /
• v.23 no.1
• /
• pp.58-66
• /
• 2014

Catalytic gasification of a low rank coal- Inner Mongolian lignite has been carried out with carbon dioxide. The gasification reactions were performed in a thermogravimetric analyzer at temperatures of $600^{\circ}C$ to $900^{\circ}C$. The kinetic parameters were evaluated using three different gas-solids reaction models and the prediction ability of each model were compared. Among the models evaluated, the modified volumetric model was found to correlate best both the non-catalytic and catalytic gasification reactions. The theoretical models, homogeneous and shrinking-core models, were found to satisfactorily correlate gasification reactions for the non-catalytic and $FeSO_4$-catalyzed reactions. In case of alkali metal catalysts, the catalytic activity was mostly pronounced at a low temperature of $600^{\circ}C$ and observed to decrease by 50% as the temperature was increased to $700^{\circ}C$, and it remained nearly constant at temperature over $800^{\circ}C$. The order of catalytic activity was found to be: $K_2CO_3$ > $Na_2CO_3$ > $K_2SO_4$ > $FeSO_4$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1668-1675
• /
• 2004

The effect of pH on surface hydrophobicity, sulfhydryl group, infrared spectrum, SDS-PAGE (sodium dodecyl sulfate-polyacrylamide gel electrophoresis) pattern and enthalpy was investigated in recovered protein from mackerel and frozen blackspotted croaker by alkaline processing. Hydrophobic residue in myofibrillar protein exposed to the surface of protein, and hydrophobic interaction were the highest around 6$0^{\circ}C$. The surface hydrophobicity was different between myofibrillar protein and myofibrillar protein including sarcoplasmic protein (recovered protein). The peak at 1636 c $m^{-l}$ was increased with pH, and the recovered protein was unfolded in alkali pH. Difference of surface and total sulfhydryl group at pH 7.0 and 10 was comparative high, and decrease of surface sulfhydryl group indicated formation of S-S bonds. Mackerel and frozen blackspotted croaker in alkaline pH showed bands of polymerized myosin heavy chain on SDS-PAGE pattern. The transition temperatures of recovered protein were 33.1, 44.3 and 65.5$^{\circ}C$. Gelation of recovered protein from alkali processing was estimated by increase of $\beta$-sheet structure by pH treatment, S-S bonds by oxidation of surface sulfhydryl group in heating, polymerization of myosin heavy chain in order.r.

• Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.102-111
• /
• 2010

This study was conducted to investigate the optimal conditions of collagen extraction from scales of yellowfin tuna (Thunnus albacares) using surface response methodology. Four independent variables of NaOH concentration and pretreatment fime in alkali pretreatment and enzyme concentration and treatment time in enzyme hydrolysis were used to predict a model equation for the collagen yield. The determinant coefficient ($R^2$) for the equation was 0.906. The values of the independent variables for the maximum yield were 0.32 N NaOH, 16.38 h alkali pretreatment time, 0.18% enzyme concentration, and 31.02 h enzyme treatment time. In the physicochemical properties of tuna scale collagen, sodium dodecyl sulfate-polyacrylamide gel electrophoresis of tuna scale collagen showed the same migration distances as that of calf skin collagen. The amide A, I, II, and III regions of tuna scale collagen in Fourier transform infrared measurements were shown in the peaks of 3,414 $cm^{-1}$, 1,645 $cm^{-1}$, 1,553 $cm^{-1}$, and 1,247 $cm^{-1}$, respectively. The amount of imino acids in tuna scale collagen was 18.97% and the collagen denaturation temperature was $33^{\circ}C$. The collagen solubility as a function of NaCl concentration decreased to 4% NaCl (w/v) and the collagen solubility as a function of pH was high at pH 2-4 and sharply decreased from pH 4 to pH 7. Viscosity of the collagen solution decreased continuously until $30^{\circ}C$ and this decreasing rate slowed in the temperature range of $35-50^{\circ}C$.

• Journal of Yeungnam Medical Science
• /
• v.3 no.1
• /
• pp.41-48
• /
• 1986

Band 3, the predominent 95,000 dalton anion transport protein, is the major intrinsic glycoprotein of the human erythrocyte membrane. This anion carrier exists as a dimer and binds the cytoskeletons such as spectrin, ankyrin and actin. And the liposomes are vesicular structures which form spontaneouly upon hydration of phospholipids. These artificial lipid vesicles have been investigated as model of the biological membranes and as a mean of improving the delivery of nucleic acids, drugs, proteins and biological substances to specific target tissues and cells. In this study, we were purified Band 3 from the human erythrocyte membrane(ghost) was prepared by hemolysis of intact human erythrocyte with weak alkali-hypotonic solution. Band 6 was removed from ghost by extracting with solution of an ionic strength of 0.15. Band 3 and Band 4 were solubilized selectively by extracting Band 6-depleted ghosts with Triton X-100 under nondenaturing conditions. Band 3 was then purified from Triton X-100 extract treated with p-chloromercuribenzoate by sucrose density gradient ultracentrifugation. This purified Band 3 was incorporated into liposomes prepared by reverse-phase evaporation. Phosphatidyl L-serine and cholesterol(1 : 1 molar ratio) were dissolved in chloroform and then chloroform was removed by rotatory evaporation under reduced pressure. Band 3 solution without Triton X-100 was introduced into a mixture of lipids and diethylether. Diethylether was subsequently removed by evaporation. This purified Band 3 and its incorporation into liposomes were confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.171-177
• /
• 2010

As concrete structures are exposed to chemical substances, damaged from salt, or progressed to the neutralization, the surface damage of the structures is generated timely fashion, resulting shortened service life. Especially, the sulfate erosion causes rapid surface defects, and the steel skeleton becomes corroded due to the water infiltration, generating stability deterioration of the concrete structure. In this study, the physical characteristics of the acid-resistant mortar with aluminosilicates was investigated in order to resolve problems of the acid resistance, one of the most serious problems of the cement type repair material. As the result of the experiment, the test specimen turned to exhibit almost equivalent physical characteristics with those of concrete sectional repair materials in terms of compressive and bending strengths. As both the cement sectional repair material and the test specimen were immerged in sulfuric acid solution to examine weight changes, the test specimens exhibited only 4% loss of their weights while the cement sectional repair materials reached at the level of 80% or above, proving the excellence acid resistant characteristics of the test specimens. Consequently, the physical characteristics of acid resistant mortar with aluminosilicates were revealed to be superior than those of concrete sectional repair materials. It can be utilized as a sectional repair material where the acidic erosion is anticipated.

• Journal of Adhesion and Interface
• /
• v.24 no.3
• /
• pp.77-85
• /
• 2023

In this research, polymeric anionic surfactants having various molecular weights and acid values were synthesized using a continuous stirred tank reactor (CSTR). The CSTR has an advantage of higher production rate and more constant product properties compared to batch and semi-batch reactors. The polymeric surfactants were made using butyl acrylate as a hydrophobic group and acrylic acid as a hydrophilic group. The synthesized polymeric surfactants were ionized with alkali solution and were used as an anionic surfactant. To investigate the properties as a surfactant, the properties of the synthesized surfactant, such as acid value, critical micelle concentration (CMC) and molecular weight, were measured. The results showed that the acid values of the polymeric surfactants were 60 to 380 and a number average molecular weight were 8,000 to 13,000 g/mol. Also, it was found that the CMC was around 0.01 g/ml, which showed similar level values with ordinary surfactant. To prove the performance of the polymeric surfactant, acrylic emulsion PSAs were synthesized using the acquired polymeric surfactant. The results showed that the maximum peel strength of 21.24 N/25mm when acid value was 150 and molecular weight was 8,500 g/mol. The values of peel strength and initial tack of acrylic emulsion PSAs using polymeric surfactant synthesized in this study showed much higher than those of reference PSAs synthesized using ordinary anionic surfactant, SDS (Sodium Dodecyl Sulfate) and SDS/TRX (Triton X-100).