• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.277-277
• /
• 2012

PCDTBT (Poly[N-9''-hepta-decanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)]) is an attractive material as a semiconducting polymer for organic thin film transistor (OTFT) and organic solar cell (OSC). High power conversion efficiency (~6%) under simulated AM 1.5G solar illumination of bulk-heterojunction solar cell with PCDTBT and [6,6]-phenyl C60 butyric acid methyl ester (PC61BM) blend was reported. In OSC, it is known that the band alignment at the interface between donor and acceptor is critical. Therefore, we studied the interfacial electronic structures of PCDTBT and PC61BM. The polymers are deposited by electro-spray on gold and In-situ x-ray and ultraviolet photoelectron spectroscopy measurements revealed the interfacial electronic structures. We obtained the energy level alignment between two materials and the different interface formation was observed with different deposition order.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.106.1-106.1
• /
• 2011

The Cu(In,Ga)Se2 (CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, the short wavelength response of CIGS solar cell is limited by narrow CdS band gap of about 2.42 eV. Taking into consideration the environmental aspect, the toxic Cd element should be replaced by a different material. Among Cd-free candidate materials, the CIGS thin film solar cells with ZnS buffer layer seem to be promising with 17.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, ZnS/CIGS solar cells still show lower performance than CdS/CIGS solar cells. There are several reported reasons to reduce the efficiency of ZnS/CIGS solar cells. Nakada reported ZnS thin film had many defects such as stacking faults, pin-holes, so that crytallinity of ZnS thin film is poor, compared to CdS thin film. Additionally, it was known that the hetero-interface between ZnS and CIGS layer made unfavorable band alignment. The unfavorable band alignment hinders electron transport at the heteo-interface. In this study, we focused on growing defect-free ZnS thin film and for favorable band alignment of ZnS/CIGS, bandgap of ZnS and CIGS, valece band structure of ZnS/CIGS were modified. Finally, we verified the photovoltaic properties of ZnS/CIGS solar cells.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.89-93
• /
• 2015

Ion-beam irradiation(IB) on $HfO_2$ surface induced high-performance liquidcrystal(LC) driving at a 1-V threshold with vertical alignment of liquid crystals(LC). The high-k materials Atomic layer deposition was used to obtain LC orientation on ultrathin and high-quality films of $HfO_2$ layers. To analyze surface morphological transition of $HfO_2$ which can act as physical alignment effect of LC, atomic force microscopy images are employed with various IB intensities. The contact angle was measured to elucidate the mechanism of vertical alignment of LC on $HfO_2$ with IB irradiation. Contact angle measurement show the surface energy changes via IB intensity increasing.

• Polymer(Korea)
• /
• v.30 no.4
• /
• pp.362-366
• /
• 2006

It was found by polarized FTIR spectroscopic studies that pentacene molecules are arranged with their molecular axes perpendicular to the substrate surface when pentacene films are deposited on a polyimide alignment layer. The ring plane in a pentacene molecule is arranged parallel to the rubbing direction of the polyimide alignment film while no specific arrangement of vertically deposited pentacene molecules was found for the film without rubbing. The pentacene band at $1296cm^{-1}$ which has a transition dipole moment parallel to the ring plane is much stronger in a polarized IR spectrum of parallel to the rubbing direction, whereas the band at $908cm^{-1}$ whose transition dipole align normal to the ring plane shows much stronger intensity in a spectrum of perpendicular to the rubbing direction. These findings indicate that orientation of polyimide chains affects the arrangement of pentacene molecules when they are deposited on a polyimide alignment film.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.1
• /
• pp.8-17
• /
• 2023

In conventional liquid crystal display(LCD) manufacturing process, Indium Tin Oxide(ITO) as transparent electrode and rubbing process of polyimide as alignment layer are essential process to apply electric field and align liquid crystal molecules. However, there are some limits that deposition of ITO requires high vacuum state, and rubbing process might damage the device with tribolectric discharge. In this paper, we made nanocomposite with PEDOT:PSS and MWNT to replace ITO and constructed alignment layer by nano imprint lithography with nano wrinkle pattern, to replace rubbing process. These replacement made that only one PEDOT:PSS/MWNT film can function as two layers of ITO and polyimide alignment layer, which means simplification of process. Transferred nano wrinkle patterns functioned well as alignment layer, and we found out lowered threshold voltage and shortened response time as MWNT content increase, which is related to increment of electric conductivity of the film. Through this study, it may able to contribute to process simplification, reducing process cost, and suggesting a solution to disadvantage of rubbing process.

• The Korean Journal of Ceramics
• /
• v.6 no.2
• /
• pp.129-133
• /
• 2000

Boron nitride films were synthesized with $N_2$ion flux of low energy, up to 100 eV, at different substrate temperatures of no heating, 200, 400, 500, and $800^{\circ}C$, respectively. Boron was supplied by e-beam evaporation at the rate of $1.5\AA$/sec. For all the conditions, hexagonal BN (h-BN) phase was mainly synthesized and high resolution transmission electron microscopy (HRTEM) showed that (002) planes of h-BN phase were aligned vertical to the Si substrate. The maximum alignment occurred around $400^{\circ}C$. In addition to major h-BN phase, transmission electron diffraction (TED) rings identified the formation of cubic BN (c-BN) phase. But HRTEM showed no distinct and continuous c-BN layer. These results suggest that c-BN phase may form in a scattered form even when h-BN phase is mainly synthesized under small momentum transfer by bombarding ions, which are not reconciled with the macro compressive stress model for the c-BN formation.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1597-1599
• /
• 2004

Carbon nanotubes (CNTs) are grown on the TiN-coated silicon substrate by varying the thickness of Ni and Invar426 catalyst layers at 600$^{\circ}C$ using an inductively coupled plasma-chemical vapor deposition (ICP-CVD). The Ni and Invar426 catalysts are formed using an RF magnetron sputtering system with various deposition periods. Characterization using various techniques, such as FESEM, HRTEM, and Raman spectroscopy, shows that the physical dimension as well as the crystal quality of grown CNTs are strongly changed by the kind and thickness of catalyst materials. It is also seen that Ni catalysts would be more desirable for vertical-alignment of CNTs compared with Invar426 catalysts. However, the CNTs using Invar426 catalysts display much better electron emission capabilities than those using Ni catalysts. The physical reason for all the measured data obtained are discussed to establish the relationship between structural properties and field-emissive properties of CNTs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.881-885
• /
• 2004

We report a method for making a device on which semi-conducting single-walled carbon nanotubes are attached selectively between two metal electrodes. This method is divided two processes. First we can connect a rope of single-walled carbon nanotubes(SWNTs) between two electrodes using the electric field. But a SWNTs' rope obtained by the first process was composed of a few of metallic and semi-conducting SWNTs together. The second process is to burn the metallic and semi-conducting nanotubes through applying a voltage. As a result, we can obtain a semi-conducting SWNT device. To make the patterned electrodes, we deposited $SiO_2$(150nm) on a wafer. After then, we made a patterned samples with Ti(200 $\AA$)/Au(300$\AA$). We empirically obtained a electric condition 0.66 $V_{pp}$ /${\mu}{\textrm}{m}$@5MHz. From this result, we verified that most of current go through the metallic nanotubes in this device. When we apply DC voltage between two electrodes, the metallic carbon nanotubes are burnt. Finally, we can obtain a semi-conducting nanotube device which we desire to make. We got the I-V characteristic graph which has shown the semi-conducting property. We hope to apply to the various applications using this selective semi-conducting carbon nanotube deposition method.ethod.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.132-138
• /
• 2007

Carbon nanotubes (CNTs) arc grown on Ni catalysts employing an inductively-coupled plasma chemical vapor deposition (ICP-CVD) method. The structural and field-emissive properties of the CNTs grown are characterized in terms of the substrate-bias applied. Characterization using the various techniques, such as field-omission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Auger spectroscopy (AES), and Raman spectroscopy, shows that the structural properties of the CNTs, including their physical dimensions and crystal qualities, as well as the nature of vertical growth, are strongly dependent upon the application of substrate bias during CNT growth. It is for the first time observed that the provailing growth mechanism of CNTs, which is either due to tip-driven growth or based-on-catalyst growth, may be influenced by substrate biasing. It is also seen that negatively substrate-biasing would promote the vertical-alignment of the CNTs grown, compared to positively substrate-biasing. However, the CNTs grown under the positively-biased condition display a higher electron-emission capability than those grown under the negatively-biased condition or without any bias applied.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.697-702
• /
• 2001

Effects of ammonia treatment on the morphologies of the catalytic metal films and carbon nanotubes subsequently synthesized via a thermal chemical vapor deposition method were investigated. An optimally controlled thermo-chemical process of ammonia treatment gave rise to a morphology of a dense distribution of vertically aligned carbon nanotubes. $NH_3$ treatment is a crucial key process to obtain vertically aligned carbon nanotubes. However, it was realized by a simple $NH_3$ treatment during synthesis at temperatures of $800-900^{\circ}C$ without any extra process. The structure and morphology of carbon nanotubes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy.