• Advances in concrete construction
• /
• v.9 no.2
• /
• pp.217-225
• /
• 2020

The recovery of waste proves a solution with two impacts: the environmental impact by the reduction of pollution and the gain of the occupied space by this waste, and the economic impact by the use of these lasts in the building and in the area of public works. The present research consists in recovering a waste marble (thrown powder exposed to the different meteorological phenomena) generated by the quarry marble of Fil-fila, located at the east side of Skikda in the north-east of Algeria, and add it, as sand in the composition of sand concrete. To carry out this research, we analyzed the evolution brought by the substitution of ordinary sand by marble waste sand, with 25%, 50%, 75% and 100% on the properties in the fresh state (density, workability and air content) and in the cured state (compressive strength, tensile strength, surface hardness and sound velocity). For durability we tested water absorption by immersion and chloride penetration. The results obtained are compared with control samples of 0% of substitution rate. In order to have a good filling of the voids in the granular skeleton; we added a quantity of limestone recycled fines from the quarries and for a good workability a super-plasticizing additive. The results showed that the partial substitution modified both the fresh and the hardened characteristics of the tested concretes, the durability parameters also improved.

• Advances in Computational Design
• /
• v.5 no.4
• /
• pp.363-380
• /
• 2020

In this paper, a cylindrical shell is immersed in a non-viscous fluid using first order shell theory of Sander. These equations are partial differential equations which are solved by approximate technique. Robust and efficient techniques are favored to get precise results. Employment of the Rayleigh-Ritz procedure gives birth to the shell frequency equation. Use of acoustic wave equation is done to incorporate the sound pressure produced in a fluid. Hankel's functions of second kind designate the fluid influence. Mathematically the integral form of the Lagrange energy functional is converted into a set of three partial differential equations. Throughout the computation, simply supported edge condition is used. Expressions for modal displacement functions, the three unknown functions are supposed in such way that the axial, circumferential and time variables are separated by the product method. Comparison is made for empty and fluid-filled cylindrical shell with circumferential wave number, length- and height-radius ratios, it is found that the fluid-filled frequencies are lower than that of without fluid. To generate the fundamental natural frequencies and for better accuracy and effectiveness, the computer software MATLAB is used.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.387-393
• /
• 2016

Background: CYP1A1 is a candidate gene for low-penetrance breast cancer susceptibility, as it plays an important role in the metabolism of carcinogens and estrogens. Purpose: The objective of this study was to assess the association between M2 (A2455G, Ile462Val) and M4 (C2453A, Thr461Asn) polymorphisms in CYP1A1 and breast cancer risk among Jordanian women and in subgroups stratified by menopausal status and smoking history. Materials and Methods: Blood samples were collected from 112 breast cancer female patients and 115 age-matched controls who underwent breast cancer screening with imaging and showed negative results (BI-RADS I or BI-RADS II). Genotyping was performed using the PCR-RFLP technique. Results: No statistically significant overall association was found between breast cancer risk and CYP1A1 M2 genotypes (p= 0.55; OR = 0.77; 95% CI= 0.32 - 1.83) nor with the M4 polymorphism (p= 0.95; OR= 0.95; 95% CI= 0.51 - 1.88). Analysis of subgroups defined by menopausal status or smoking history also revealed no association with these polymorphisms. Furthermore, the four identified haplotypes (AC; AA; GC and GA) were equally distributed among cases and controls, and haplotype analysis showed a strong linkage disequilibrium of both studied loci in either cases or controls (D'=1). Conclusions: Based on the study results, CYP1A1 M2 and M4 polymorphisms do not seem to play a major role in breast cancer risk among Jordanian females.

• Geomechanics and Engineering
• /
• v.16 no.3
• /
• pp.295-308
• /
• 2018

The excavation of twin tunnels is a process that destabilizes the ground. The stability of the tunnel lining, the control of ground displacements around the tunnel resulting from each excavation and the interaction between them must be controlled. This paper provides a new approach for replacing the costly 3D analyses with the equivalent 2D analyses that closely reflects the in-situ measurements when excavating twin tunnels. The modeling was performed in two dimensions using the FLAC2D finite difference code. The three-dimensional effect of excavation is taken into account through the deconfinement rate ${\lambda}$ of the soil surrounding the excavation by applying the convergence-confinement method. A comparison between settlements derived by the proposed 2D analysis and the settlements measured in a real project in Algeria shows an acceptable agreement. Also, this paper reports the investigation into the changes in deformations on tunnel linings and surface settlements which may be expected if the twin tunnels of T4 El-Harouche Skikda were constructed with a tunneling machine. Special attention was paid to the influence of the excavation phase shift distance between the two mechanized tunnel faces. It is revealed that the ground movements and the lining deformations during tunnel excavation depend on the distance between the tunnels' axis and the excavation phase shift.

• Journal of Fashion Business
• /
• v.22 no.1
• /
• pp.82-99
• /
• 2018

The purpose of this study is to examine the characteristics that appeared in the fashion and colors of exotic tastes used by Renoir with a view to re-evaluating his-attitude towards exotic tastes. The methods used in this study were literature research and analysis of visual data from Renoir's works. The results of the study are as follows. Renoir's exotic tastes originated from the material perspective appearing in the fashions and accessories of Algeria, Orient, Spain, and Japan. Parisienne Odalisque Lise in Harem-style, Jeanne Samari in parisienne fashion holding a Japanese fan, and Gabriel in oriental fashion were portrayed as major muses. The Algerian style consisted of white, yellow or red veils, thobes, loose pants worn in Haik, and burnous. The Oriental-style was composed of harem pants, turbans, hair accessories, ornate zouave jackets, and oriental ornaments. The Spanish-style showed gay ornaments, fitted red or yellow matador costume, red bandannas, black hats, and red dresses, plus Spanish guitars. The Japanese-style consisted of kimonos, accessories such as fans, and backgrounds with interior articles such as vases, wall picture frames, and folding screens. The exotic fashion colors were red, yellow and white. Renoir expressed the works with his delicate skills and sense of craftsmanship, and he even added creative design portrayals sometimes. He selected fashions and accessories of exotic tastes as objects and expressed the objects with materials and colors reflecting regional characteristics as such, he can be regarded as an artist wed to who fashions of exotic tastes.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.55-65
• /
• 2009

Due to the rapid increase of electricity demand, consideration of environmental constraints in optimal power flow (OPF) problems is increasingly important. In Algeria, up to 90% of electricity is produced by thermal generators (vapor, gas). In order to keep the emission of gaseous pollutants like sulfur dioxide (SO2) and Nitrogen (NO2) under the admissible ecological limits, many conventional and global optimization methods have been proposed to study the trade-off relation between fuel cost and emissions. This paper presents an efficient decomposed Parallel GA to solve the multi-objective environmental/economic dispatch problem. At the decomposed stage the length of the original chromosome is reduced successively and adapted to the topology of the new partition. Two subproblems are proposed: the first subproblem is related to the active power planning to minimize the total fuel cost, and the second subproblem is a reactive power planning design based in practical rules to make fine corrections to the voltage deviation and reactive power violation using a specified number of shunt dynamic compensators named Static Var Compensators (SVC). To validate the robustness of the proposed approach, the algorithm proposed was tested on the Algerian 59-bus network test and compared with conventional methods and with global optimization methods (GA, FGA, and ACO). The results show that the approach proposed can converge to the near solution and obtain a competitive solution at a critical situation and within a reasonable time.

• Geomechanics and Engineering
• /
• v.9 no.6
• /
• pp.775-791
• /
• 2015

Due to the extension of communication ways (metro, highways, railways), hence, to improve traffic flow imposes often the difficult crossing that generally drive to the construction of underground works (tunnel, water conveyance tunnel...) plays a major role in the redevelopment of urban areas. This study is focused on the assessment of the interaction response of parallel tunnels, so this study uses the results from the simulation of two tunnels to illustrate a few observations that may aid in practical designs. In this article, simultaneous drilling of highway's twin tunnels is simulated by means of Finite Element Method (FEM) implemented in Plaxis program. So the treated subject appears in a setting of geotechnical where one can be to construct several tunnels sometimes in a ground of weak mechanical characteristics. The objective of this study is to simulate numerically the interaction effects caused by construction of two parallels tunnels. This is an important factor in the study of the total answer of the problem interaction between parallels underground works. The importance of the effects transmitted is function of several parameters as the type of the works, and the mechanical characteristics (tunnel size, depth, and the relative position between two tunnels, lining thickness...). This article describes numerical analyses of two parallels tunnels interaction. This study will be applied to a real case of a section tunnel T4 of the highway East-West (Algeria); the study presented below comprises a series of numerical simulations of two tunnels using the computer program Plaxis which is used in the analyses is based on Finite Element Method.

• Steel and Composite Structures
• /
• v.30 no.1
• /
• pp.13-29
• /
• 2019

This work presents the buckling investigation of functionally graded plates resting on two parameter elastic foundations by using a new hyperbolic plate theory. The main advantage of this theory is that, in addition to including the shear deformation effect, the displacement field is modelled with only four unknowns and which is even less than the first order shear deformation theory (FSDT) and higher-order shear deformation theory (HSDT) by introducing undetermined integral terms, hence it is unnecessary to use shear correction factors. The governing equations are derived using Hamilton's principle and solved using Navier's steps. The validation of the proposed theoretical model is performed to demonstrate the efficacy of the model. The effects of various parameters like the Winkler and Pasternak modulus coefficients, inhomogeneity parameter, aspect ratio and thickness ratio on the behaviour of the functionally graded plates are studied. It can be concluded that the present theory is not only accurate but also simple in predicting the critical buckling loads of functionally graded plates on elastic foundation.

• Agribusiness and Information Management
• /
• v.12 no.1
• /
• pp.36-49
• /
• 2020

This study pertains to direction of exports direction of major agricultural commodities viz., rice, maize, bengal gram, chillies and cotton from India. In the ensuing next decade during 21st century, India is likely to witness changes in the export pattern of these commodities due to both internal and external constraints. One of the major internal constraints is mounting cost of production. Similarly, one of the most important external constraints include excessive subsidization by importing countries that makes Indian commodities less competitive in the international market. So, the important research question is to analyse the direction of exports of major agricultural commodities from India during post-WTO regime. The dynamic nature of trade pattern of the selected commodities was analyzed by employing the first order Markov process by examining gains and losses in respect of export shares of major Indian agricultural commodities to different countries. During the post-WTO regime, it was found that Saudi Arabia for rice, Bangladesh for maize, Pakistan for bengal gram, Malaysia for (dry) chillies, China, mainland for cotton are the loyal destinations for the commodities. The increasing demand for the selected commodities in countries like Saudi Arabia, Côte d'Ivoire for rice; Malaysia for maize; Pakistan and Algeria for Bengal gram; USA and Sri Lanka for (dry) chillies and Vietnam, Pakistan and Indonesia for cotton need to be explored for augmenting the exports. In order to achieve this goal, it is essential that consumer preferences in newer markets, market intelligence and impediments for augmenting exports need to be researched. It is also high time to analyze the export competitiveness of selected commodities across these importing countries.

• Journal of Fashion Business
• /
• v.27 no.1
• /
• pp.61-76
• /
• 2023

The purpose of this study was to derive exotic products handled by Bon Marche department store, examine characteristics, and reveal the meaning of exotic taste in the 19th century. The research method is literature research centered on original materials of the time, such as old literature related to department stores, and films, newspapers, magazines, and periodicals as well as books and papers. Commercial catalogs and Agenda-Buvard published by Bon Marché were used as visual materials. Results are as follows. Exotic tastes of products of the Bon Marche department store in the late 19th century showed an oriental style centered on Persia, India, China, and Japan. Products from various regions such as Turkey, Spain, Algeria, Tunisia, England, Italy, and Russia were also accepted. These exotic tastes had the following contributions and meanings. First, they expanded items and product development and activated domestic industry through production of imitations and replicas. Second, before the advent of department stores, foreign items that came to Europe were exclusive properties of a few privileged classes. However, in the late 19th century, as the number of consumers who wanted to have a new status higher than themselves increased, exotic products of the Bon Marche department store became the object of desire for material pursuits toward the upper class rather than sentimental fantasies. Third, exotic tastes gradually spread to the public as production of products imitating foreign products became possible industrially with an easy access to them. From this, it can be seen that department stores were mediators of trends and the epicenter of popularizing exotic tastes.