• 제목/요약/키워드: Alarm Valve

검색결과 18건 처리시간 0.033초

복합알람밸브의 강도안전성에 관한 유한요소해석 (Finite Element Analysis on the Strength Safety of a Hybrid Alarm Valve)

  • 김청균;김태환
    • 한국생산제조학회지
    • /
    • 제21권2호
    • /
    • pp.221-224
    • /
    • 2012
  • This paper presents the strength safety of a hybrid alarm valve by a finite element analysis. The stress and strain of a conventional hybrid alarm valve are calculated for the given maximum test pressure of 2MPa. Especially, the FEM computed maximum stress of a conventional hybrid valve is only 18.6% of yield strength, 370MPa. This means that the conventional valve is designed with a thick thickness of a valve structure. But, new hybrid alarm valve model, which is developed by optimized design method in this study, shows more low level of 43% in maximum stress and strain compared with that of a conventional hybrid valve. These results may recommend the reduction of a weight and a dimension for an optimized hybrid alarm valve.

유한요소법을 이용한 알람밸브의 응력 및 변형거동에 관한 연구 (A Study on the Stress and Deformation Behavior of an Alarm Valve using Finite Element Method)

  • 김청균;김태환
    • 한국가스학회지
    • /
    • 제16권2호
    • /
    • pp.14-17
    • /
    • 2012
  • 본 연구에서는 유한요소법을 이용하여 알람밸브의 응력 및 변형거동에 대한 해석적 연구를 수행하였다. 알람밸브의 강도안전성에 대한 연구는 최대시험압력이 2.0MPa인 경우에 대하여 계산하였다. 유한요소법으로 계산한 알람밸브의 최대응력은 항복강도 370MPa의 6.1%에 해당하고, 인장강도 485MPa의 4.6%에 해당하는 결과로 제시되었고, 이것은 커버 플랜지와 밸브몸체 사이의 모퉁이 부근에서 발생하는 것으로 나타났다. 그리고 밸브에서 발생한 최대변형 $12{\mu}m$는 알람밸브 몸체의 중간부근에서 형성되는 것으로 예측되었다. 이러한 연구결과는 대부분의 알람밸브에서 지나치게 높은 강도안전성을 갖도록 설계하는 것으로 지적할 수 있고, 이것은 알람밸브의 중량이나 크기가 증가되는 요소로 작용하고 있음을 알 수 있다.

압력손실을 줄이기 위한 준비작동식 유수검지장치 본체 구조 개선 (Structure Improvement of Preaction Valve to Reduce the Pressure Drop)

  • 홍승태;정재한;남준석;권영규;한철수;유승준
    • Korean Chemical Engineering Research
    • /
    • 제53권1호
    • /
    • pp.16-21
    • /
    • 2015
  • 다이어프램 방식 준비작동식 유수검지장치의 압력손실을 줄이기 위하여 본체 구조를 개선하였다. 개정된 유수제어밸브의 압력손실시험 기술기준을 통과하기 위해서는 압력손실이 20.7 kPa을 초과하여서는 안된다. 압력손실시험은 한국소방산업기술원 유수제어밸브 기술기준에 따라서 실시하였다. 준비작동식 유수검지장치는 습식 유수검지장치에 비해 압력손실이 크게 발생하였는데, 그 원인을 유체의 유동현상과 관련하여 분석하였다. 준비작동식 유수검지장치의 본체 내부 구조는 유로의 단면 크기와 방향 변화로 인해 압력손실 요인이 많았다. 이러한 압력손실 요소를 제거하기 위해 습식 유수검지장치와 비슷한 클래퍼 타입으로 구조를 변경하였다. 구조 변경 후 압력손실 값은 호칭 80A인 경우 80.9 kPa에서 14.4 kPa로 감소하였으며, 호칭 100A인 경우 171.0 kPa에서 14.2 kPa로 감소하여 기술기준에 적합한 압력손실 값을 얻을 수 있었다.

가스 계량 밸브 시스템의 개발에 관한 연구 (A Study on the development of gas metering valve system)

  • 최영규
    • 한국정보전자통신기술학회논문지
    • /
    • 제7권4호
    • /
    • pp.200-204
    • /
    • 2014
  • 가정에서 사용하는 LPG는 용량을 측정할 수 있는 방법이 없기 때문에 공급자에 의존할 수밖에 없었다. 또한 LPG 가스 교체 시기를 알 수 없기 때문에 가스 용량을 측정하여 교체시기에 대한 경보를 필요로 하고 있다. 본 연구에서는 사용자와 공급자가 믿고 신뢰할 수 있는 있도록 가스통을 교체할 시기를 알려 주고, 공급가스 용량을 쉽게 알 수 있도록 하기 위해 홀 효과 센서를 적용하여 가스 용량 측정 밸브 시스템을 개발하였다.

언어표현 기반의 북미 정상회담에 관한 한미 신문사설의 비교 (A Comparison between Korean and English News Editorials with Focus on U.S.-North Korea Summit Based on Expressive Language)

  • 노보경;반현
    • 문화기술의 융합
    • /
    • 제5권3호
    • /
    • pp.125-130
    • /
    • 2019
  • 2019년 하노이에서 열린 체 2차 북미회담은 공동 합의를 도출하지 못한 채 결렬되었다. 본 논문은 마틴과 화이트(2005)의 평가어 체계를 근간으로 총 8개의 사설들, 구체적으로는 4개의 주요 미국 언론들의 사설들과 4개의 한국 언론들의 사설들을 평가어들을 포함한 언어적 표현들을 중심으로 분석하였다. 분석 결과 뉴욕타임즈, USA투데이, 워싱턴 포스트, 월스트리트 저널의 사설들 중 월스트리트 저널을 제외한 3개의 언론들은 모두 회담 결렬의 원인을 트럼프 대통령 개인으로 귀속시키며 부정적 평가어로 입장을 전달함을 알 수 있었다. 그러나 4개의 신문 사설에서는 한반도의 비핵화나 평화에 대한 우려에 대한 내용을 담고 있지 않았다. 반면 한국의 언론들은 모두 회담 결렬의 원인보다는 향후 방향에 대해 중점을 두고 있었는데, 두 언론은 부정적 행위평가어를 이용하여 문제점과 우려를 제기했지만, 다른 두 언론은 한겨레신문과 경향신문은 향후 대응과 입장에 중심을 두었고 부정적 평가어보다는 당부와 조언의 언어적 자원을 활용하고 있음이 밝혀졌다. 이를 통해, 담론 소비에 있어 양국의 언론들은 각자의 입장을 전달하는 데 있어 부정적인 평가어를 선호한다는 점, 그리고 기대와 당부를 전달할 때는 평가어보다는 보조 용언과 같은 언어적 표현을 사용한다는 것을 알 수 있었다.

NFC 보안인증과 솔레노이드 밸브를 이용한 이륜차 이동제한장치 성능평가 (Performance Evaluation of Motorcycle's Anti-theft Device using NFC Authentication and Solenoid Valve)

  • 문보람;진태석
    • 한국지능시스템학회논문지
    • /
    • 제26권1호
    • /
    • pp.82-86
    • /
    • 2016
  • 본 논문은 이륜차의 근원적인 도난방지를 위한 기존의 탈착방식의 기구적 열쇄방식을 개선하고 NFC(Near Field Communication) 접목하여 사용자 인증 및 개인화 서비스를 위한 이륜차 이동제한 및 정보 보안 시스템 개발 연구로서 모터사이클 운전자 편의성 및 보안성 요구 증대에 따른 근거리 무선통신 기술을 융합한 브레이크 장치의 이동제한 방법을 제시하였다. 제안 방법의 기본적인 원리 및 보안인증에 따른 이동장치의 구성 및 동작원리 등을 제시하였다. 본 연구에서는 모터사이클용 이동제한 및 정보 보안 시스템의 연동으로 원격에서 락/언락 기능을 수행하기 위한 솔레노이드 밸브 장착방법을 설계하였다. 사용자 휴대단말기의 인증으로 이동제한장치 해제를 위한 NFC 보안인증 방법을 설명하고 정지 상태에 자동 또는 수동으로 모터사이클 브레이크 유압흐름 제어하는 방법과 실험단계의 기구적 제작 결과를 제시하였다.

사고사례 정밀분석을 통한 상압저장탱크의 안전에 관한 연구 (A Study on Safety of Atmospheric Storage Tank through Detailed Analysis of Accident Case)

  • 임지표;박수율
    • 한국안전학회지
    • /
    • 제34권4호
    • /
    • pp.41-48
    • /
    • 2019
  • In October 2018, a large fire occurred after an explosion in an internal floating roof tank (IFRT) that stores gasoline by wind lantern in Goyang city, Gyeonggi-do. Although there was no casualty damage, the fire inside the tank lasted for 17 hours, and caused a great wave socially, and it was a chance to review the safety of the atmospheric storage tank. In this study, the necessity of installing a flame arrester at peripheral vents was examined through the calculation of the size of ventilation pipe and ventilation rate of internal floating roof tanks in terms of the function of the peripheral vent. Next, the necessity of the emergency shut-off valve linked with the high-level alarm to prevent the overflow of the atmospheric storage tank was confirmed by LOPA. Finally, safety measures to prevent overpressure, flame propagation and overflow which cause major accidents in atmospheric storage tank are suggested.

가스터빈 내부 냉각계통 발화에 의한 고온부품 손상의 현상학적 고찰 (A Phenomenological Review on the Damage of Hot Gas Parts caused by Explosion of Gas Turbine Cooling System)

  • 유원주;이승현
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2010년도 춘계학술대회
    • /
    • pp.81-95
    • /
    • 2010
  • Gas turbines generating power operate in high temperature condition and use natural gas as fuel. For that reason, there are many cases where damage is done to the hot gas parts caused by the high temperature and many accidents occur like gas explosions, then various efforts are needed to maintain the hot gas parts and prevent accidents. It is difficult to find the root causes of damage to the hot gas parts from the gas explosion caused by gas leakage through rotor cooling air line from fuel gas heat exchanger during the shut down. To prevent gas turbine from damage, removal of gas leakage inside of gas turbine is required by purging the turbine before firing, improving the fuel gas heating system and installing alarm systems for detecting gas leakage from stop valve to turbine while the gas turbine has shut down.

  • PDF

가스터빈 내부 냉각계통 발화에 의한 고온부품 손상의 현상학적 고찰 (A Phenomenological Review on the Damage of Hot Gas Parts caused by Explosion of Gas Turbine Cooling System)

  • 유원주;이승현
    • 대한안전경영과학회지
    • /
    • 제12권2호
    • /
    • pp.75-82
    • /
    • 2010
  • Gas turbines for power generating operate in a very high temperature condition and use natural gas for fuel. For this reason, many cases of damage happen at hot gas parts which are severely affected by high temperature gas and many cases of explosion occur by fuel gas. So a lot of efforts should be made to prevent hot gas parts damage and gas explosion accidents. Though there are many damage cases and explosion accidents, it is very difficult to find out the root causes of hot gas parts damage caused by gas explosion due to gas leakage in the heat exchanger for air cooling and gas heating. To prevent gas turbine from damage caused by gas explosion, removal of leakage gas from gas turbine is inevitably required before firing the gas turbine and installing alarm systems is also required for detecting gas leakage at stop valve to turbine while shut down.