• Journal of Magnetics
• /
• v.8 no.1
• /
• pp.32-35
• /
• 2003

Magnetic funnel Junctions (MTJs) were fabricated on thermally oxidized Si (100) wafers using DC magnetron sputtering. The film Structures were Ta(50 ${\AA}$)/CU(100 ${\AA}$)$Ni_{80}Fe_{20}(20 $ ${\AA}$)/Cu(50 ${\AA}$)/$Mn_{75}Ir_{25}(100 $ ${\AA}$)/$Co_{70}Fe_{30}(25$ ${\AA}$)/Al-O(15 ${\AA}$)/$Co_{70}Fe_{30}(25 $ ${\AA}$)/$Ni_{80}Fe_{20}(t)/Ta(50 $ ${\AA}$), with t=0 ${\AA}$, 100 and 1000 ${\AA}$, respectively. X-ray diffraction has shown improvement of (111) texture of IrMn$_3$ and Cu by annealing. The exchange-biased energy is almost inversely proportional to temperature. The difference between the coercivity H$_c$ and the exchange biased field H$_E$ for t = 0 $_3$ sample is smaller than that for t = 1000 ${\AA}$. For the pinned layer, the decreasing rate of the coercivity with the temperature is higher compared to that of the exchange field, but variation of H$_c$ is similar to that of the exchange field for free layer.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.153-153
• /
• 2017

The application of the coating supports the mechanical characteristics of the implant, and various materials and coatings are currently being used in the implant in a way to accelerate adhesion. Especially, plasma electrolytic oxidation (PEO) coating has been proposed continually with good surface treatment of titanium alloys. Also, the PEO process can incorporate Ca and P ions on the titanium surface through variables varied factor. PEO process for bioactive surface has carried out in electrolytes containing Ca and P ions. Natural bone is composed of mineral elements such as Mg, Si, Zn, Sr, and Mn, etc. Especially, Mg and Si of these elements play role in bone formation and growth after clinical implantation of bio-implants. In this study, corrosion charateristics of PEO-treated Ti-6Al-4V alloy in solution containing Si and Mg ions has been investigated using several experimental techniques. The PEO-treated surfaces were identified by X-ray diffraction, using a diffractometer (XRD, Philips X' pert PRO, Netherlands) with Cu $K{\alpha}$ radiation. The morphology was observed by field-emission scanning electron microscopy (FE-SEM, Hitachi 4800, Japan) and energy-dispersive X-ray spectroscopy (EDX, Oxford ISIS 310, England). The potentiodynamic polarization and AC impedance tests for electrochemical degradations were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to + 2000mV.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.457-466
• /
• 2014

Rigorous analysis was performed to identify the structure and materials of the murals to study techniques used on mural tombs of ancient Daegaya era(6th century). The murals were painted by applying mortar on the walls and the ceiling after building a stone chamber and creating ground layers on mortar layers. Mud was applied on most of the mortar layers on four sides of the walls except the ceiling. Sand was not used in mortar but was made of materials with pure calcium substances. In addition, shells in irregular sizes with incomplete calcination were mixed; and the mortar's white powder was inferred as lime obtained by calcination of oyster shells. Kaolinite($Al_2Si_2O_5(OH)_4$) was used in the ground layer, Cinnabar(HgS) was used for red pigment, Malachite($Cu_2CO_3(OH)_2$) for green and Lead white($PbCO_3{\cdot}Pb(OH)_2$) for white. Mud plaster was applied on the mortar and was composed thinly and densely using clayey of particle size smaller than that of medium sand. It was assumed that the finishing was for repair after long time had passed since the mortar layer came off. Using lime made with oyster shells as mortar is unprecedented in ancient Korean mural tombs and its durability was very poor, suggesting that Gaya's mortar production technique was relatively behind compared to that of Koguryo's in the same era.

• Economic and Environmental Geology
• /
• v.28 no.3
• /
• pp.251-257
• /
• 1995

Three PEA (Pulverised Fuel Ash) samples, which were fresh, 17 and some 40 years weathered, were collected from two major British power plants. Batch leaching tests with these samples using distilled water and simulated industrial leachate showed higher amounts of element liberation from fresh ash, including Ca, Na, K, S (as $SO^{2-}_4$, $Cr_{total}$, Cu, Li Ni, Mo and CI and this seems to indicate their surface association and easier dissolution when contact with water. On the contrary Mg, Al, Ba, Si, V, As and Se do not show such readily leachable concentrations and these elements might be more associated with glass fraction in PFA particle rather than surface. Although element concentrations in the weathered ash are much lower than those in the initial leachate from the fresh ash, elements are still detected as resonable concentrations, with rather constant levels and this seems to demonstrate the element release from unstable glass phase of PFA particle. Fe, Ca, $Cr_{total}$, Cu, Ni, Zn and Hg were removed from the synthetic leachate by PFA and this is also confirmed by gain in solid PFA. The order of element retention is Meaford weathered ash > Drax weathered ash > Drax fresh ash in decreasing order and this conforms with the degree of weathering. Namely, the more wethered, the more wethered, the more effective in metal retention from the synthetic leachate.

• Conservation Science in Museum
• /
• v.16
• /
• pp.138-153
• /
• 2015

Wooden standing Bodhisattva in the collection of the National Museum of Korea (Bon 8239) was purchased as part of the museum's Central Asian collection during the Museum of Japanese Goverment General of Korea. The wooden statue exhibiting classical characteristics of Song Dynasty Buddhist sculptures is colored on the whone. The result of condition check for exhibition in 2014, it has severely damaged, with discoloring and exfoliation in color pigment and crack of wood observed in various areas. The object was therefore treated for conservation. A series of analysis were performed also at this time to determine the production technique and the materials, including testing of the X-ray penetration depth, X-ray fluorescence analysis and wood species analysis. This revealed that the statue was made by joining several separate pieces of wood. As for color pigments, the white pigment was either chalk (CaCO₃) or gypsum(CaSO₄·2H₂O), and the green pigment was emerald green (Cu(C₂H₃O₂)₂·3Cu(AsO₂)₂). The red pigment appeared to be lead red(Pb₃O₄) and the blue pigment was ultramarine blue (3Na₂O·3Al₂O₃·6SiO₂·2Na₂S). All the pigments were repainted in later eras. The analysis, indicated that the wood was derived from a tree of the genus Populus, family Salicaceae. The wooden standing Bodhisattva was repaired and reinforced with natural materials and was brought to a stable condition necessary for display.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.4
• /
• pp.299-308
• /
• 2015

The six natural zeolites collected in Pohang area, Kyungsangbuk-do, Korea, were characterized by XRD, XRF, DTA, TGA, and CEC analysis. The primary species of these zeolite are modenite, albite, and quarts in Kuryongpo-A (Ku-A), Kuryongpo-B (Ku-B), Kuryongpo-C (Ku-C), Donghae-A (Dh-A), Donghae-B (Dh-B), and Donghae-C (Dh-C) samples. The XRF analysis showed that the six zeolites contain Si, Al, Na, K, Mg, Ca, and Fe. Cation exchange capacity of Kuryongpo-C (Ku-C) zeolite was the highest compared to other zeolites. The capabilities of removing heavy metal ions such as $Pb^{2+}$, $Cd^{2+}$ and $Cu^{2+}$ were compared. The effect of reaction time in removing heavy metal ions was studied. The experimental results showed that the efficiency of removal was low for $Pb^{2+}$, $Cd^{2+}$ and $Cu^{2+}$ ions. These may be caused by the low content of zeolite in the six natural zeolites. This indicates that the adsorption capacity roughly tends to depend on the zeoite contents, ie., the grade of zeolite ore.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.156-156
• /
• 2000

Recently, the surface electronic states have attracted much attention since their standing wave patterns created around steps, defects, and adsorbates on noble metal surfaces such as Au(111), Ag(110), and Cu(111) were observed by scanning tunneling microscopy (STM). As a typical example, a striking circular pattern of "Quantum corral" observed by Crommie, Lutz, and Eigler, covers a number of text books of quantum mechanics, demonstrating a wavy nature of electrons. After the discoveries, similar standing waves patterns have been observed on other metal and demiconductor surfaces and even on a side polane of nano-tubes. With an expectation that the surface states could be utilized as one of ideal cases for studying two dimensionakl (sD) electronic system, various properties, such as mean free path / life time of the electronic states, have been characterized based on an analysis of standing wave patterns, . for the 2D electron system, electron density is one of the most importnat parameters which determines the properties on it. One advantage of conventional 2D electron system, such as the ones realized at AlGaAs/GaAs and SiO2/Si interfaces, is their controllability of the electrondensity. It can be changed and controlled by a factor of orders through an application of voltage on the gate electrode. On the other hand, changing the leectron density of the surface-state 2D electron system is not simple. On ewqy to change the electron density of the surface-state 2D electron system is not simple. One way to change the electron density is to deposit other elements on the system. it has been known that Pd(111) surface has unoccupied surface states whose energy level is just above Fermi level. Recently, we found that by depositing Pd on Cu(111) surface, occupied surface states of Cu(111) is lifted up, crossing at Fermi level around 2ML, and approaches to the intrinsic Pd surface states with a increase in thickness. Electron density occupied in the states is thus gradually reduced by Pd deposition. Park et al. also observed a change in Fermi wave number of the surface states of Cu(111) by deposition of Xe layer on it, which suggests another possible way of changing electron density. In this talk, after a brief review of recent progress in a study of standing weaves by STM, I will discuss about how the electron density can be changed and controlled and feasibility of using the surface states for a study of 2D electron system. One of the most important advantage of the surface-state 2D electron system is that one can directly and easily access to the system with a high spatial resolution by STM/AFM.y STM/AFM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.336-336
• /
• 2012

유기물/무기물 하이브리드 나노 복합체를 사용하여 제작한 비휘발성 유기 메모리 소자는 공정의 간편성과 휘어짐이 가능한 장점을 가지고 있어 많은 연구가 활발히 진행되고 있으나 대부분의 좋은 전기적 성능을 갖는 소자에 포함되는 나노 입자는 독성을 가지거나 가격이 비싸다는 단점을 갖고 있다. 인체진화적이며 가격이 저렴한 나노입자를 이용한 비휘발성 메모리 소자에 대한 전기적 성능의 안정성에 대한 연구는 미미한 상황이다. 이에 본 연구에서는 인체친화적 $CuInS_2(CIS)$-ZnS 코어-쉘 나노 입자가 분산되어 있는 poly (methylmethacrylate) (PMMA) 박막을 사용하여 비휘발성 메모리 소자를 제작하여 전기적 성능과 안정성에 대한 연구를 하였다. 인체친화적 CIS-ZnS 나노입자를 포함한 PMMA 용액을 Al 하부전극을 가진 p-Si (100) 기판 위에 스핀코팅 방법으로 균일하게 도포 하였다. 남아 있는 용매를 완전히 제거하기 위해 열을 가해 CIS-ZnS 나노입자가 분산되어 있는 PMMA 나노 복합체를 형성하였다. CIS-ZnS 나노입자를 포함한 PMMA 박막 위에 금속 마스크를 사용하여 Al 상부전극을 열 증착 방법으로 형성하여 비휘발성 메모리 소자를 완성하였다. 정전용량-전압 (C-V) 측정을 하여 평탄 전압 이동을 관찰하였고, CIS-ZnS 나노입자의 역할을 알아보기 위해 나노입자가 없는 PMMA 박막을 갖는 소자를 제작하여 동일한 조건에서 C-V 측정을 하였다. 소자의 안정성을 알아보기 위해 평탄 전압-유지 시간 (Vth-t) 측정을 수행하였다. Vth-t 측정은 CIS-ZnS 나노입자가 전하 포획 장소로 사용할 수 있는 것과 전기적 안정성을 갖고 있는 것을 확인하였다. C-V와 Vth-t 측정결과 및 에너지 대역도를 사용하여 CIS-ZnS 나노입자가 분산되어 있는 PMMA 박막을 포함한 나노 복합체를 사용하여 제작한 이용한 비휘발성 메모리 소자에서 전하수송 메커니즘을 설명하였다.

• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.203-209
• /
• 2000

Top synthetic spin valves with structure Ta/NiFe/CoFe/Cu/CoFe(P 1)/Ru/CoFe(P2)/FeMn/Ta on Si (100) substrate with natural oxide were prepared by dc magnetron sputtering system. We have changed only the thickness in free layers and the thickness difference (Pl-P2) in two ferromagnetic layers separated by Ru, and investigated the effect of magnetic film thickness on interlayer coupling field in spin valve with synthetic antiferromagnet. According to the decrease of free layer thickness, interlayer coupling field was increased due to the magnetostatic coupling(orange peel coupling). In case of t$\_$P1/>t$\^$P2/, interlayer coupling field agreed well with the modified Neel model suggested in conventional spin valve structures by Kools et al. However, in case of t$\_$P1/>t$\^$P2/, it was found that the interlayer coupling field was not explained by the Modified Neel Model and was confirmed the necessity of further remodeling. The dependence of Cu thickness on the interlayer coupling field was investigated and 10 Oe of interlayer coupling field was obtained when the Cu thickness is 32 $\AA$.

• 보존과학연구
• /
• s.32
• /
• pp.113-121
• /
• 2011

Four glass beads from Hakso-ri site, O'chang were analyzed for thirteen oxides with SEM/EDS and lead isotope ratios with TIMS respectively. These samples were classified to potash glass system($K_2O-CaO-SiO_2$) with HCLA(High CaO, Low $Al_2O_3$). However three samples with above 4% for lead could be classified to potash-lead ($K_2O-PbO-CaO-SiO_2$)glass system and it seemed that coloring agent for greenish blue was Cu. Lead isotope ratio data for four samples did not make a group but scattered to the space respectively. It needs more study for compositions and lead iosotope data of potash-lead glasses with regions and ages.