• 한국재료학회지
• /
• 제17권12호
• /
• pp.629-633
• /
• 2007

This study examined the effect of growth temperature on the electrical and optical properties of hydrogenated Al-doped zinc oxide (AZO:H) thin films deposited by rf magnetron sputtering using a ceramic target (98 wt.% ZnO, 2 wt.% $Al_2O_3$). Various AZO films on glass were prepared by changing the substrate temperature from room temperature to $200^{\circ}C$. It was shown that intentionally incorporated hydrogen plays an important role on the electrical properties of AZO : H films by increasing free carrier concentration. As a result, in the 2% $H_2$ addition at the growth temperature of $150^{\circ}C$, resistivity of $3.21{\times}10^{-4}{\Omega}{\cdot}cm$, mobility of $21.9cm^2/V-s$, electric charge carrier concentration of $9.35{\times}10^{20}cm^{-3}$ was obtained. The AZO : H films show a hexagonal wurtzite structure preferentially oriented in the (002) crystallographic direction.

• 한국재료학회지
• /
• 제14권5호
• /
• pp.328-333
• /
• 2004

Transparent ZnO:Al conductor films for the optoelectronic devices were deposited by using the capacitively coupled DC magnetron sputtering method. The effect of Al doping concentration and discharge power on the electrical and optical properties of the films was studied. The film resistivity of $8.5${\times}$10^{-4}$ $\Omega$-cm was obtained at the discharge power of 40 W with the ZnO target doped with 2 wt% $Al_2$$_O3$. The transmittance of the 840 nm thick film was 91.7% in the visible waves. Increasing doping concentration of 3 wt% $Al_2$$O_3$ in ZnO target results in significant decrease of film resistivity, which may be due to the formation of $Al_2$$O_3$ particles in the as-deposited ZnO:Al film and the reduced ZnO grain sizes. Increasing DC power from 40 to 60 W increases deposition rate by more than 50%, but can induce high defect density in the film, resulting in higher film resistivity.

• 한국진공학회지
• /
• 제16권4호
• /
• pp.267-272
• /
• 2007

라디오파 마그네트론 스퍼터링 방법으로 유리 기판 위에 Al 도핑된 ZnO (AZO) 박막을 성장시켰다. 증착시 스퍼터링 가스로 사용하는 산소 유량비의 변화에 따른 AZO 박막의 특성을 X-선 회절법, 원자 주사 현미경, 홀 효과 측정법으로 조사하였다. 증착 온도 $400^{\circ}C$에서 산소 유량비 0%로 증착된 AZO 박막은 가장 큰 c-축 우선 배향성과 최저의 비저항값 $6.9{\times}10^{-4}{\Omega}cm$을 나타내었다. 산소 유량비가 증가함에 따라 ZnO (002)면의 회절 피크의 세기는 실질적으로 감소하는 경향을 보였다. 또한, 산소 유량비가 감소함에 따라 전하 운반자의 농도와 홀 이동도는 증가하였으나, 전기 비저항은 감소하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.330-330
• /
• 2007

• 한국진공학회지
• /
• 제20권2호
• /
• pp.141-145
• /
• 2011

ZnO:Al 박막을 RF magnetron sputtering 법을 이용하여 초기 압력에 따라 증착하고 박막의 구조적, 광학적, 전기적 특성을 연구하였다. 초기 압력 변화에 의해 ZnO:Al 박막의 특성의 변화를 확인하였고 고품질의 박막을 얻을 수 있었다. 모든 ZnO:Al 박막에서 (002)면의 우선 배향성을 보였으며 가시광선 영역(400~800 nm)에서 85% 이상의 좋은 투과도를 보였다. 초기 압력이 낮아질수록 결정성, 비저항 그리고 성능지수 특성이 향상됨을 확인하였다. 초기 압력에 따른 비저항의 향상은 결정립 크기 변화에 의한 것으로 판단된다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권3호
• /
• pp.89-92
• /
• 2009

High-quality Al-N doped p-type ZnO thin films were deposited on Si and buffer layer/Si by DC magnetron sputtering in a mixture of $N_2$ and $O_2$ gas. The target was ceramic ZnO mixed with $Al_2O_3$ (2 wt%). The p-type ZnO thin films showed a carrier concentration in the range of $1.5{\times}10^{15}{\sim}2.93{\times}10^{17}\;cm^{-3}$, resistivity in the range of 131.2${\sim}$2.864 ${\Omega}cm$, mobility in the range of 3.99${\sim}$31.6 $cm^2V^{-1}s^{-l}$, respectively. It was easier to dope p-type ZnO films on Si substrates than on buffer layer/Si. The film grown on Si showed the highest quality of photoluminescence (PL) characteristics. The Al donor energy level depth $(E_d)$ of Al-N codoped ZnO films was reduced to about 50 meV, and the N acceptor energy level depth $(E_a)$ was reduced to 63 meV.

• 한국진공학회지
• /
• 제22권5호
• /
• pp.257-261
• /
• 2013

RF 마그네트론 스퍼터링법을 이용하여 Al 도핑 ZnO 박막을 공정 압력에 따라 증착하고 박막의 구조적, 광학적, 전기적 특성을 연구하였다. 공정 압력 의 최적화를 위해 공정압력을 0.07 Torr, 0.02 Torr, 그리고 0.007 Torr로 변화하였다. 공정압력이 감소하면서, Al 도핑 ZnO 박막의 결정성은 향상되었고 표면 거칠기도 감소하였다. 모든 Al 도핑 ZnO 박막은 가시광선 영역(400~800 nm)에서 80% 이상 투과도를 보였다. 0.007 Torr의 공정 압력에서 가장 좋은 전기적 특성을 보였는데 이는 표면거칠기 감소에 따른 산소 흡착이 감소하여 나타난 현상으로 판단된다.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.799-808
• /
• 1995

Transparent conductive films of aluminium doped zinc oxide (AZO) have been prepared by using the DC magnetron sputtering with the ZnO : Al (Al2O3 2 wt%) oxide target oriented to c-axis. Electrical and optical properties depended upon the O2/Ar gas ratio. The optical transmittance and sheet resistance of the AZO coated glass was 60~65% and 75Ω/$\square$, respectively at the O2/Ar gas ratio of 0. With the increase of the oxygen partial pressure to 2.0$\times$10-2, they were increased to the values of 81% and 1kΩ/$\square$, respectively. The films with the resistivities of 1.2~1.4$\times$10-3 Ω.cm, mobilities of 11~13 $\textrm{cm}^2$/V.sec and carrier concentrations of 3.5$\times$1020~4.0$\times$1020/㎤ were produced at the optimum O2/Ar gas ratio, which was 0.5$\times$10-2~1.0$\times$10-2. According to XRD analysis, the films have only one peak corresponding to the (002) plane, which indicates that there is a strong preferred orientation of the films. The grain size of ZnO films were calculated to 200~320 $\AA$, which was increased with the O2/Ar gas ratio and Ar gas flowrate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1469-1472
• /
• 2006

We investigated the electrical and optical properties of ZnO:Al thin films as a function of the thermal process conditions. The film was prepared by RF magnetron sputtering followed by annealing in a box furnace in air. An ZnO:Al (98:2) alloy with the purity of 99.99% (3 inch diameter) was used as the target material. The electrical properties of the transparent electrode, exhibited surface oxidation as a result of rapid oxygen absorption with increasing annealing temperature. The processed ZnO:Al films and commercial ITO(indium-tin-oxide) were applied to an OLED stack to investigate the current density and luminescence efficiency. The efficiency of the device using the ZnO:Al electrode was higher than that from the device using the ITO electrode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.525-528
• /
• 2001

ZnO:Al thin film can be used as a transparent conducting oxide(TCO) which has low electric resistivity and high optical transmittance for the front electrode of amorphous silicon solar cells and display devices. This study of electrical, crystallographic and optical properties of Al doped ZnO thin films prepared by Facing Targets Sputtering (FTS), where strong internal magnets were contained in target holders to confine the plasma between the targets, is described. Optimal transmittance and resistivity was obtained by controlling flow rate of O$_2$ gas and substrate temperature. When the of gas rate of 0.3 and substrate temperature 200$^{\circ}C$ , ZnO:Al thin film had strongly oriented c-axis and lower resistivity(<10$\^$-4/Ω-cm).