Densification behavior and microstructural evolution during the liquid-phase sintering of alumina-anorhite system were investigated as a function of MgO addition. When MgO component was added in either alumina or anorthite glass powder the aspect ratio of alumina grains decreased and concurrently the are of flat interface which was formed as a result of contact solid alumina gains rather increased. Consequently addition of MgO component in the Al2O3-amorthite system brought about suppression of the rearrangement of solid grains during the liquid phase sintering and then densification of specimens was also retarded.
AlGaN 기반 UV-C 발광다이오드(LEDs)에 전기화학적 전위차 활성화(EPA)에 의한 p-형 활성화를 진행하였다. 높은 저항과 낮은 전도도를 유발하는 중성 Mg-H의 복합체의 수소원자를 EPA를 이용하여 제거하여 p-형 활성화 효율을 높였다. 중성 Mg-H 복합체는 주요 매개 변수인 용액, 전압, 시간에 의해 Mg-과 H+로 분해되며, 2차 이온질량 분광법(SIMS) 분석을 통하여 개선된 정공 캐리어의 농도를 확인할 수 있었다. 이 메커니즘은 결국 내부 양자효율(IQE)의 증가, 광 추출 효율 향상, 역 전류 영역의 누설전류 값 개선, 접합 온도 개선 등을 이루어 결과적으로 UV-C LED의 수명을 향상시켰다. 체계적인 분석을 위해 SIMS, Etamax IQE 시스템, 적분구, 전류-전압(I-V) 측정 등을 사용하였으며, 그 결과를 기존의 N2-열 처리 방법과 비교 평가하였다.
버네사이트(birnessite, $7{\AA}$ manganate, ${\delta}-MnO_2$)는 망간단괴를 구성하는 주요한 광물이다. 버네사이트는 또한 이온교환제와 배터리 재충전 물질로서 사용될 수 있기 때문에 다양한 합성법이 연구되고 있다. 그러나 버네사이트는 화학양론적으로 성립하지 않는 화학조성을 가지기 때문에 합성 시 단일 상을 수득하기에는 어려움이 존재한다. 버네사이트 합성과정 중에서 중간생성물로 페이크네타이트(${\beta}-MnOOH$)가 나타나는데, 본 연구에서는 이 중간생성물이 버네사이트로 상전이 하는 특성 차이를 XRD와 SEM 결과를 통해 비교하였다. 이번 연구에서는 기존에 연구된 합성 방법 중에서 산화-환원(redox)반응을 기작으로 하는 Feng et al. (2004)와 Luo et al. (1998) 두 방법을 이용하였다. Feng et al. (2004) 방법으로는 $27^{\circ}C$에서 60일, Luo et al. (1998) 방법으로는 $60^{\circ}C$에서 3일 에이징 한 시료에서 단일 상의 버네사이트를 수득할 수 있는 것으로 나타났다. 이러한 두 시료의 상전이 특성은 $Mg^{2+}$ 도핑여부에 따라 차이가 나타나는 것으로 판단되며 $Mg^{2+}$ 도핑된 Luo et al. (1998) 방법으로 합성된 버네사이트의 경우 페이크네타이트 상전이 속도가 느리게 나타났고 고온에서 거의 단일 상 버네사이트를 확인할 수 있었으며 결정 표면 및 형태 또한 두 방법 간의 차이를 확인하였다.
In this study, an Al-0.7wt%Fe-0.2wt%Mg-0.2wt%Cu-0.02wt%B alloy was designed to fabricate an aluminum alloy for electrical wire having both high strength and high conductivity. The designed Al alloy was processed by casting, extrusion and drawing processes. Especially, the drawing process was done by severe deformation of a rod with an initial diameter of 12 mm into a wire of 2 mm diameter; process was equivalent to an effective strain of 3.58, and the total reduction in area was 97 %. The drawn Al alloy wire was then annealed at various temperatures of 200 to $400^{\circ}C$ for 30 minutes. The mechanical properties, microstructural changes and electrical properties of the annealed specimens were investigated. As the annealing temperature increased, the tensile strength decreased and the elongation increased. Recovery or/and recrystallization occurred as annealing temperature increased, and complete recrystallization occurred at annealing temperatures over $300^{\circ}C$. Electric conductivity increased with increasing temperature up to $250^{\circ}C$, but no significant change was observed above $300^{\circ}C$. It is concluded that, from the viewpoint of the mechanical and electrical properties, the specimen annealed at $350^{\circ}C$ is the most suitable for the wire drawn Al alloy electrical wire.
Mantle xenoliths in alkali basalt at Boun, the Gansung area and Baegryung Island in South Korea are spinel lherzolites composed of olivine, orthopyroxene, clinopyroxene, and spinel. Minerals show homogeneous compositions. Olivine compositions have Fo$_{89.0}$ to Fo$_{90.2}$, low CaO (0.03 to 0.12 wt%), and NiO of 0.34 to 0.40 wt%; the orthopyroxene is enstatite with En$_{89.0}$ to En$_{90.0}$ and Al$_{2}$O$_{3}$ of 4 to 5 wt%; the clinopyroxene is diopside with En$_{47.2}$ to En$_{49.1}$ and Al$_{2}$O$_{3}$ of 7.42 to 7.64 wt% from Boun and 4.70 to 4.91 wt% from Baegryung. Spinel chemistry shows a distinct negative trend, with increaeing Al corresponding with decreasing Cr, and Mg$^{#}$ (100Mg/Mg+Fe) and Cr$^{#}$ (100Cr/Cr+Al) of 75.1 to 81.9 and 8.5 to 12.6, respectively. The equilibrium temperatures of these xenoliths, taken as the average obtained from those of Mercier (1980) and Sachtleben and Seck (1981), lie between 970 and 1020$^{\circ}$C, and equilibrium pressures derived from Mercier (1980) fall within the range of 12 to 19 kbar (i.e., 42 to 63 km). These temperatures and pressures are reinforced by considerations of the Al-isopleths in the MAS system (Lane and Ganguly, 1980), as adjusted for the Fe effect on Al solubility in orthopyroxene (Lee and Ganguly, 1988). The equilibrium temperatures and pressures of xenoliths, as considered in P/T space, belong to the oceanic geotherm, based upon the various mantle geotherms presented by Mercier (1980). This geotherm is completely different from continental geotherms, e.g., from South Africa (Lesotho) and southern India. Mineral compositions of spinel-lherzolites in South Korea and eastern China are primitive; paleo-geotherms of both are quite similar, but degrees of depletion of the upper mantle could vary locally. This is demonstrated by eastern China, which has various depleted xenoliths caused by different degrees of partial melting.
본 연구는 steel 재질의 판과 Cu, Ni, Al, Mg 재질의 핀 간에 발생하는 마찰에 의한 마찰소음 특성을 왕복운동 및 회전운동 실험장치를 통하여 연구하였다. 실험 결과 미끄럼 속도에 대한 마찰곡선의 음의 기울기가 소음발생시점에 영향을 주었다. 특히 Cu 가 소음발생시점과 음의 기울기 측면에서 마찰소음방지에 가장 우수한 재질임을 확인하였다.
The purpose of this study was to investigate the mechanical properities and biocompatibility with crystallization temperature and time of a bioactive glass-ceramic system $41.4wt%SiO_{2}-35.0wt%CaO-3.0wt%MgO-12.0wt%P_{2}O_{5}-8.6wt%Al_{2}O_{3}$ with same molar percent of $Al_{2}O_{3}\;and\;P_{2}O_{5}$. The crystallization behaviors were investigated with DTA, XRD and SEM. Fracture toughness with the change of crystallization temperature and time was measured by indentation fracture method. Also, biocompatibility was evaluated by culture of mouse fibroblast cell line L929. The results obtained were as follows ; 1. The major crystalline phases were apatite and anorthite, and relative intensity of anorthite phase was increased at $1004^{\circ}C$. 2. The hardness and fracture toughness were gradually increased with the increase in ceraming temperature to $1004^{\circ}C$. 3. When the glass ceramic was heat-treated for 4 hours at ceraming temperature of $1004^{\circ}C$, hardness and fracture toughness showed the maximum values $578.84k/mm^2\;and\;2.07MPa\;m^{1/2}$, respectively. 4. The growth rate and cytotoxic of L929 fibroblast cells for bioactive glass ceramic were better than those of stainless steel and titanium.
이 연구의 목적은 영월, 정선 및 평창지역에 분포하는 13개 석탄광에서 배출되는 산성광산배수의 물리화학적 특성파악을 통하여 주변 수계에 미치는 영향을 조사하는 것이다. 2000년 11월부터 2002년 7월까지 총 6회의 시료를 채취하여, pH, Eh, TDS, salinity, DO 등의 물리화학적 특성은 물론 Al, Ca, Fe, Mg, Mn, Zn 등을 포함한 총 18개의 양이온, 질산염과 황산염을 포함한 6개의 음이온의 한량을 각각 ICP-AES와 IC를 이용하여 분석하였다. 조사대상 지역이 광역적이고 수계가 서로 다르기 때문에 총 4개의 수계로 구분하여 조사한 결과, '수계 1'에 해당하는 삼척탄좌 정암광업소에서 유출되는 물이 가장 전형적인 산성광산배수의 특징인 낮은 pH (3~4)와 높은 TDS (1,000-5,000 ㎎/1) 값을 보이고 있었으며, 이들에 의해 주변 수계가 상당한 영향을 받고 있었다 양이온 분석결과, 일부 광산에서는 비오염지역의 수계에서 검출되는 중금속에 비해 수십에서 수백 배 높은 함량이 검출되었다. 특히, Al, Fe, Mn 및 Zn 등은 상당히 부화되어, 정암광업소에서 유출되는 산성수에서는 각각 350 mg/1의 Al, 80 mg/1의 Fe, 44 mg/1의 Mn 및 8 mg/1의 Zn이 검출되었다. 서진광산, 세방광산 및 성진광산 둥에서도 50 mg/1 이상의 Al과 100 mg/1 이상의 Fe 및 l0 mg/l 이상의 Mn 등이 검출되어 이들에 의한 수계 오염 가능성이 확인되었다. 음이온의 분석 결과에 의하면, 대부분의 조사대상광산에서 200 mg/1 이상의 황산염이 검출되었으며 일부 광산 유출수에서는 100 mg/1 이상의 황산염이 검출되었다. 또한 산성광산배수의 계절적인 변화를 고찰하기 위해 계절별로 시료를 채취하여 조사한 결과, 건기에 비해 우기에 일부 금속과 황산염의 농도가 증가되는 경향을 보였다. 결과적으로, 조사대상지역의 수계는 석탄광 개발로 인해 발생된 산성광산배수에 의해 중금속 및 일부 음이온으로 오염되어 있으며, 따라서 이를 위한 적절한 처리 시설의 설치와 관리가 요구된다.
The effect of composed phase in the hot pressed CaO-MgO-Al2O3-SiO2 glass-ceramic has been investigated through microstructure studies, thermal, physical and mechanical properties. Sintering was done in the condition at the temperature range 900~95$0^{\circ}C$ for 20~120 mins under 7.5 MPa unilateral pressure. Sintered ceramics were composed of diopside, anorthite, residual glass and the portion of each phase was dependent on the sintering temperature and the holding time: as the temperature increases, the amount of diopside increased and then the rate of increase of diopside reduced with increasing anorthite. The thermal expansion coefficient of hot pressed was reduced with increasing crystallinity of hot pressed and was in the range of 6.69~7.46$\times$10-6 K-1 below $600^{\circ}C$. The elastic constant of hot pressed increased with increasing crystallinity up to about 80%, but after that was reduced due to the change of microstructure. The flexural strength of sintered ceramics was decreased with higher temperature and holding time, while the fracture toughness of those increased. It was shown that the physical and mechanical properties of hot pressed ceramic were related to the fraction of composed sintered ceramics, similar to a particulate composite, to the crystallinity of 80% of the glass-ceramic.
In this study, three magnesium alloys were investigated; those are 1.5wt.% CaO added AM80, 1.0wt.% CaO added AM60, and conventional MRI153 alloys. Test specimens of three alloys were prepared by re-melting and casting into steel mold with ingots and machining. The mechanical properties and the creep behavior at 150 degrees Celsius of these specimens were determined and their microstructures were characterized using OM and SEM. For the application to die-casting, fluidity test were carried out with spiral mold. Compared with 1.0wt.% CaO added AM60 alloy, 1.5wt.% CaO added AM80 alloy exhibited good creep properties in all test conditions. Moreover, CaO added alloys showed better creep properties than MRI153 alloy at lower load condition. It is proposed that 1.5wt.% CaO added AM80 alloy is useful to apply to power-train parts such as transmission case in vehicles.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.