• Composites Research
• /
• v.33 no.5
• /
• pp.256-261
• /
• 2020

In this study, the ignition temperature of the Al-Ti-C reaction system, the microstructure and the mechanical properties of the TiC/Mg composite which produced by the self-propagating high-temperature synthesis (SHS) followed by stir casting process were investigated. Mg based composite with uniformly dispersed 0, 10, 20, and 30 vol.% TiC were fabricated, and higher volume fraction of TiC reinforced composite showed superior compressive strength and wear resistance as compared with Mg matrix. It is attributed to the less contamination, defects, impurities in TiC/Mg composite by the in-situ SHS yield effective load transfer from the matrix to the reinforcement.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.555-560
• /
• 2002

Brazing of Al to Cu using AI-Si-Mg-Bi brazing alloy has been carried out in the vacuum furnace. In the bonded interlayer, there were two kinds of intermetallic compounds. One of these intermetallic compounds was e phase and the other was b phase. The growth of b phase was controlled by diffusion Al into Cu. Deformation behavior of Al-Cu brazing joint was brittle without deformation of the base metal. Shear strength of the joint was only about 20MPa. The shear specimen broken in the intermetallic compound, which was mainly e phase. Shear strength did not depend on the bonding temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.274-274
• /
• 2007

LTCC 소재로 응용을 위해 Mg-Si-O계 세라믹스에 glass frit을 첨가하여 소결 및 마이크로파 유전특성에 관한 연구를 진행하였다. $Mg_2SiO_4$를 기본조성으로 하고 $B_2O_3-ZnO-Na_2O-SiO_2-Al_2O_3$계 glass를 20~40wt%로 첨가하여 $900^{\circ}C$에서 1시간 소결하였을 때 glass 함량이 증가함에 따라 밀도$(g/cm^3)$ 및 유전율$(\varepsilon_r)$은 증가하였고 품질계수$(Q{\times}f_0)$ 값은 감소하는 경향을 보였다. $900^{\circ}C$에서 1시간 소결한 소결체의 유전특성은 유전율 $(\varepsilon_r)$ = 6.5, 품질계수 $(Q{\times}f_0)$ = 4,000(GHz), 온도계수 $({\tau}_f)={\pm}10ppm/^{\circ}C$로 우수한 특성을 확인하였다. 그리고 Glass Milling 효과에 따른 glass-ceramics 소결체의 미세구조, 마이크로파 유전특성을 비교 고찰하였다.

• YAKHAK HOEJI
• /
• v.38 no.1
• /
• pp.46-56
• /
• 1994

Daily oral administration to Sprague Dawly rats for 4 weeks of DWP-301, at doses of 0, 500, 1000, 2000 mg/kg presented following results; 1) No animals died and there were no significant differences in general signs, body weight, food consumption, urinalysis haematological, biochemical, gross pathological and histopathological examination between control and treated rats. 2) Water consumption, pH-, protein- urobilinogen-, ketone-values in urine were significantly increased in the treated male and female rats. It is supposed that these differences in animals are a consistent feature of repeated overdosage with test suspensions. The results indicate that the non toxic dose of test compounds in rats is over 2000 mg/kg in this test system.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.33-39
• /
• 2014

In this study, the solubility of Cu, which is a main metal component of wasted PCB, in $CaO-SiO_2-Al_2O_3-MgO$ slag system was investigated. Each 20 grams of Cu chips and the quaternary slag manufactured was placed in an carbon crucible and melted for 10 hours in the temperature between 1673 K and 1825 K to confirm the equilibrium state. The oxygen partial pressure was controlled by the ratio of CO and Ar gas in the range of $10^{-17.23}$ to $10^{-15.83}$ atm. The concentration of Cu in the slag increased with increasing oxygen partial pressure, slag basicity, and MgO content in the slag. The concentration of Cu in the slag decreased with increasing temperature. The Cu dissolution reaction in the slag is an exothermic reaction.

• Journal of Powder Materials
• /
• v.16 no.1
• /
• pp.63-67
• /
• 2009

In order to investigate the effect of rapid solidification on the microstructure and the mechanical properties of Al-Zn-Mg system alloys, water atomization was carried out, since the water atomization beared the highest solidification rate among the atomization processes. The as atomized alloy powders consisted of fine grains less than 4 ${\mu}m$ in diameter, and the second particles were not detected on XRD. The microstructure as solidified was maintained even after the spark plasma sintering at the heating rate of 50 K/min. On the other hand, lower rate of 20 K/min induced a formation of $MgZn_2$ particles, resulting in strengthening of the matrix. The density was almost constant at the temperature above 698K. The sintering temperature above 698K had no effect on the strength of the sintered materials.

• Korean Journal of Materials Research
• /
• v.20 no.7
• /
• pp.370-373
• /
• 2010

In fabricating plasma display panels, the photolithographic process is used to form patterns of barrier ribs with high accuracy and high aspect ratio. It is important in the photolithographic process to control the refractive index of the photosensitive paste. The composition of this paste for photolithography is based on the $B_2O_3-SiO_2-Al_2O_3$ glass system, including additives of alkali oxides and rare earth oxides. In this work, we investigated the density, structure and refractive index of glasses based on the $B_2O_3-SiO_2-Al_2O_3$ system with the addition of $Li_2O$, $K_2O$, $Na_2O$, CaO, SrO, and MgO. The refractive index of the glasses containing K2O, Na2O and CaO was similar to that of the [BO3] fraction while that of the SrO, MgO and Li2O containing glasses were not correlated with the coordination fraction. The coordination number of the boron atoms was measured by MAS NMR. The refractive index increased with a decrease of molar volume due to the increase in the number of non-bridging oxygen atoms and the polarizability. The lowest refractive index (1.485) in this study was that of the $B_2O_3-SiO_2-Al_2O_3-K_2O$ glass system due to the larger ionic radius of $K^+$. Based on our results, it has been determined that the refractive index of the $B_2O_3-SiO_2-Al_2O_3$ system should be controlled by the addition of alkali oxides and alkali earth oxides for proper formation of the photosensitive paste.

• Journal of Power System Engineering
• /
• v.20 no.3
• /
• pp.17-21
• /
• 2016

The corrosion behavior of aluminum alloys in the $H_2SO_4$ solution was investigated based on potentiodynamic techniques. Electrochemical properties, such as corrosion potential($E_c$), passive potential($E_p$), corrosion current density($I_c$), corrosion rate(mpy), of Al-Mg-Si, Al-Cu-Si and Al-Si alloys were characterized at room temperature. Passive aluminum oxide film, which including $Al_2(SO_4)_3$ and $3Al_2O_34SO_38H_2O$, were uniformly formed on the surface via the reaction of Al with $SO{_3}^{2-}$ or $SO{_4}^{2-}$ ions in the $H_2SO_4$ solution and the dependence of the corrosion behavior on the alloying element was discussed. The selective leaching of alloy element increased with increasing Cu content in the aluminum alloys.

• Journal of Power System Engineering
• /
• v.20 no.4
• /
• pp.69-74
• /
• 2016

Recently, in order to meet the stricter emission regulations, the proportion of after-treatments for vehicle and vessel is increasing gradually. The purpose of this study is to investigate the de-$CH_4$ characteristics of NGOC in front of proposed combined system according to additive catalyst and support ratio. In the case of Pd addition, the de-$CH_4$ performance of 2Pt-2Pd-3MgO/$Al_2O_3$ NGOC was improved by approximately 10 to 20% for the HC components. The de-$CH_4$ performance of 2Pt-2Pd-3Cr-3MgO/$Al_2O_3$ NGOC was higher compared to five kinds of NGOC catalysts, because Cr particle was smaller and dispersion of Pd was increased. The NGOC(Zeolite:$Al_2O_3$(80%:20%)｝catalyst according to support ratio, was improved performance at low temperature region on CO and NO conversion rate.

• Economic and Environmental Geology
• /
• v.21 no.1
• /
• pp.29-44
• /
• 1988

Equilibrium relations between garnet and orthopyroxene have been investigated by reversal experiments in the range of 20-45Kb and $975-1400^{\circ}C$ in the $FeO-MgO-Al_2O_3-SiO_2$(FMAS) system. A mixture of PbO with about 55 mol per cent $PbF_2$ was used as a flux and proved very effective. The Fe-Mg exchange reaction seems to have little or no compositional dependence at these conditions. Combination of the experimental results with the garnet mixing model of Ganguly and Saxena(1984) yields the following geothermometric expression for the common natural assemblages that can be represented essentially within the system $FeO-MgO-CaO-MnO-Al_2O_3-SiO_2$. $$T^{\circ}C=(1971+11.91P(Kb)+1510(X_{Ca}+X_{Mn})^{Gt}/(lnK_D+0.96)-273$$.