• Resources Recycling
• /
• v.5 no.3
• /
• pp.65-72
• /
• 1996

Colloidal calcium wrbonate(diametcr 0.02-0 09 m~wja s developed to maintain the mamenl of pnriide formatio~>w ~lhoutsurlace trealment. The control factors of particle size and optimum condiliuna for compound fam*tition has not bccn studiedyet. This shldy war aimed at developing a method fur compounding colloidal calcium carbonfcte to cnl~hol cubic calciumcarbonate, and then compounding the b-o types oI precipitated calcium wrbonatc under optimum wndilrans Calc~umhydroxide was calcinated at 1, lWC far two hours, md then hydrated for 30 minutes at t i i O rprn and ambiznt temperahlle.Two-liter suspension was subjected to the contact with carbon dioxide at l5"C, 600 ipxn and C0= injection in the rate of 1 Umin Two types of dcium carbonate(cuhic calcium carbonatc(0 24.9 pm) md collnidd calcium mhnnate (0.02-0 09 pm))were compounded by "wing the concentrations of calcium oxide and ihe suspension were compounded. It was found that theoptimum concentrations of each suspensions were 5 wt % and 2.5 \I*.% respectively. ' h c key control factor af thc parlicle slzcdislribution was the concenkation al the suspension. The size of compounded particles was measured by a Zcla S k r 'fieaverage particle size of the cubic calcium carbonate aas 223.4 nm(0.223 pm), and that of thc colloidal a~lciumc arbonate was93.6 nm (0.093 km). Ihe particle sizc was evenly cantlolled on a stdblc basis in an H, O reaction system.asis in an H, O reaction system.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.2
• /
• pp.92-103
• /
• 1993

A sunday system with a horizontal bin-type composter was constructed and operated to evaluate its composting performance for four days for each test in October, 1992. A sundry system is one of popular systems for composting livestock manure, of which main benefit is to utilize unlimited, clean, and free solar radiation. A rectangular concrete bin(composter) with dimension of 300cm(length) X90cm(width) X60cm(height) was bedded alternatively with four lanes of aeration pipes and heating pipes, and was insulated at three walls with 50mm styrofoam. Each aeration pipe of a diameter of 25mm had 4mm perforated holes at every 15cm longitudinally, and supplied air of about 2m$^3$/min to the composter to maintain aerobic condition . A stirrer rotating at 1 rpm made one round trip every 20 minutes on the conveying chain along the the length of the composter. Five tests (Test 1~Test 5) were implemented to evaluate the composting effectiveness of a sundry system with a horizontal bin-type composter. Treatments of two levels of the mixture ratio of swine manure and paper sludge cakes(manure : paper sludge cakes= 1 : 4 and 1 : 2) and two levels of the water content(W/C ; 70% and 50%) were made to test the significance of the physicochemical properties for decomposition of the mixture materials. Temperature, C/N ratio, water content, microbial activity of the composting materials were taken measurements to evaluate its performance with the lapse of composting time for tests. A small-scale sundry system with a bin-type composter did not appear to be an appropriate system for composting livestock manure. Since heat generation by the composting materials could not overcome heat loss due to areation in a small-scale composter, a proper thermal enviroment could not be maintained to propagate massively thermopilic microorganism relatively in a short period of time. Different from the result of Chol et al.(1992) 6), a temperature variation of the composting materials did not show the peak clearly and C/N ratio didn't lower with time as expected. Mesophilic microoragnism seemed to play an important role for decomposition of the mixture materials. A sundry system with a bin-type composter may be good for a large-scale livestock farm household which may produce enough animal manure. Therefore a decision should be made very carefully to choose a system for composting livestock waste.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2105-2112
• /
• 2009

Recently RFID system has been adopted in various fields rapidly. However, we ought to solve the problem of privacy invasion that can be occurred by obtaining information of RFID Tag without any permission for popularization of RFID system To solve the problems, it is Ohkubo et al.'s Hash-Chain Scheme which is the safest method. However, this method has a problem that requesting lots of computing process because of increasing numbers of Tag. Therefore, We suggest the way (process) satisfied with all necessary security of Privacy Protection Shreme and decreased in Tag Identification Time in this paper. First, We'll suggest the SP-Division Algorithm seperating SPs using the Performance Measurement consequence of each node after framing the program to create Hash-Chain Calculated table to get optimized performance because of character of the grid environment comprised of heterogeneous system. If we compare consequence fixed the number of nodes to 4 with a single node, equal partition, and SP partition, when the total number of SPs is 1000, 40%, 49%, when the total number of SPs is 2000, 42%, 51%, when the total number of SPs is 3000, 39%, 49%, and when the total number of SPs is 4000, 46%, 56% is improved.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.14 no.2
• /
• pp.154-172
• /
• 2001

Major symptoms of al1ergic rhinitis are nasal obstruction, sneezing and watery rhinorrhea. Onpyetang has been used to treat for nasal obstruction, which is one of the symptoms of allergic rhinitis. This Experimental study was done to research effects of Onpyetang and transformed Onpyetang(Allii Radix is deducted from Onpyetang) on the anti-allergic effects. We have studied the vascular permeability response induced by serotonin and histamine, the contact dermatitis response induced by picryl chloride, the delayed type hypersensitivity response to SRC, the mice paw edema induced by carrageenin, the writhing syndrome induced by $0.7\%$ acetic acid, and the rectal temperature in febrile rats induced by yeast. The results were as follows : 1. In the vascular permeability response to intradermal serotonin and histamine. Onpyetang proved significant inhibitory effect(P<0.05, p<0.001) But transformed Onpyetang proved significant inhibitory effect only to histamine(P<0.05) 2. In the contact dermatitis response induced by picryl chloride, Onpyetang and transformed Onpyetang proved significant inhibitory effect.(P<0.05, P<0.05) 3. In the delayed type hypersensitivity response induced by SRC, Onpyetang and transformed Onpyetang proved significant inhibitory effect on mice paw edema.. (P<0.05, P<0.05) 4. In the delayed type hypersensitivity response induced by SRC, Onpyetang proved significant inhibitory effect to serum IgE.(P<0.01) But transformed Onpyetang proved insignificant inhibitory effect on serum Ig E. 5. In the mice paw edema induced by carrageenin, Onpyetang and transformed Onpyetang proved significant anti-inflammatory effect. (P<0.01, P<0.01) 6. In the writhing syndrome induced $0.7\%$ acetic acid, Onpyetang and transformed Onpyetang proved significant analgestic effect. (P<0.01, P<0.01) 7. In the rectal temperature in febrile rats induced by yeast, Onpyetang and transformed Onpyetang proved significant anti-pyretic effect.(P<0.001, P<0.01) according to this result Onpyetang was conclude to be effective on anti-allergic, anti-pyretic, anti-inflammatory and analgestic action. but transformed Onpyetang(Allii Radix is deducted from Onpyetang) was not effective on the vascular permeability response to intradermal serotonin and increasing Ig E of delayed type hypersensitivity response induced by SRC. In addition, transformed Onpyetang is not effective as Onpyetang. More study should be done about the role of Allii Radix.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.186-186
• /
• 2000

After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.

• Korean Journal of Materials Research
• /
• v.21 no.7
• /
• pp.384-390
• /
• 2011

Ti-6Al-4V ELI (Extra Low Interstitial) alloy has been widely used as an alternative to bone due to its excellent biocompatibility. However, it still has many problems, including a high elastic modulus and toxicity. Therefore, nontoxic biomaterials with a low elastic modulus should be developed. However, the fabrication of a uniform coating is challenging. Moreover, the coating layer on Ti and Ti alloy substrates can be peeled off after implantation. To overcome these problems, it is necessary to produce bulk Ti and Ti alloy with hydroxyapatite (HA) composites. In this study, Ti, Nb, and Zr powders, which are biocompatible elements, were milled in a mixing machine (24h) and by planetary mechanical ball milling (1h, 4h, and 6h), respectively. Ti-35%Nb-7%Zr and Ti-35%Nb-7%Zr-10%HA composites were fabricated by spark plasma sintering (SPS) at $1000^{\circ}C$ under 70MPa using mixed and milled powders. The effects of HA addition and milling time on the biocompatibility and physical and mechanical properties of the Ti-35%Nb-7%Zr-(10%HA) alloys have been investigated. $Ti_2O$, CaO, $CaTiO_3$, and $Ti_xP_y$ phases were formed by chemical reaction during sintering. Vickers hardness of the sintered composites increases with increased milling time and by the addition of HA. The biocompatibilty of the HA added Ti-Nb-Zr alloys was improved, but the sintering ability was decreased.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.3
• /
• pp.257-264
• /
• 2012

Objectives: This study's aims were to evaluate the effects of load center of gravity within an object lifted and feet placements on peak EMG amplitude acting on bilateral low back muscle groups, and to suggest adequate foot strategies with an aim to reducing low back pain incidence while lifting asymmetric load. Methods: The hypotheses that asymmetric load imposes more peak EMG amplitude on low back muscles contralateral to load center of gravity than symmetric load and maximum peak EMG amplitude out of bilateral ones can be relieved by locating one foot close to load center of gravity in front of the other were established based on biomechanics including safety margin model and previous researches. 11 male subjects were required to lift symmetrically a 15.8kg object during 2sec according to each conditions; symmetric load-parallel feet (SP), asymmetric load-parallel feet (AP), asymmetric load-one foot contralateral to load center of gravity in front of the other (AL), and asymmetric load-one foot ipsilateral to load center of gravity in front of the other (AR). Bilateral longissimus, iliocostalis, and multifidus on right and left low back area were selected as target muscles, and asymmetric load had load center of gravity 10cm deviated to the right from the center in the frontal plane. Results: Greater peak EMG amplitude in left muscle group than in right one was observed due to the effect of load center of gravity, and mean peak EMG amplitudes on both sides was not affected by load center of gravity because of EMG balancing effect. However, the difference of peak EMG amplitudes between both sides was significantly affected by it. Maximum peak EMG amplitude out of both sides and the difference of peak EMG amplitude between both sides could be reduced with keeping one foot ipsilateral to load center of gravity in front of the other while lifting asymmetric load. Conclusions: It was likely that asymmetric load lead to the elevated incidence of low back pain in comparison with symmetric load based on maximum peak EMG amplitude occurrence and greater imbalanced peak EMG amplitude between both sides. Changing feet positions according to the location of load center of gravity was suggested as one intervention able to reduce the low back pain incidence.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2001.04a
• /
• pp.115-126
• /
• 2001

1988년 Reaven이 인슐린저항성증후군(insulin resistance syndrome)의 개념을 처음 소개한 후 전세계적으로 관심이 증가하고 있다. 인슐린저항성증후군은 대사성증후군 (metabolic syndrome), X 증후군(syndrome X)이라고도 하며, 인슐린 저항성에 따른 고인슐린혈증, 내당능장애(impaired glucose tolerance)와 2형 당뇨병(인슐린 비의존형 당뇨병), 이상지질혈증(dyslipidemia), 고혈압 등 일련의 질환은 동일인에서 흔히 병발하고, 이들은 모두 죽상경화증(atherosclerosis)의 위험인자라는 관점에서 상호연관성을 갖는 질환군이라는 개념이다. 2형 당뇨병은 인슐린에 대한 말초조직의 저항성과 상대적으로 감소된 인슐린 분비능의 결과라고 할 수 있다. 또한 상당수의 2형 당뇨병은 비만, 특히 복부비만을 동반하고 있으며, 비만은 그 자체로 인슐린 저항성을 유발한다. 결국 인슐린 저항성이 장기간 개선되지 못하게 되면 2형 당뇨병이 유발되게 된다. 따라서 2형 당뇨병에 대한 최선의 치료는 혈당조절 뿐만 아니라 인슐린 저항성과 관련된 심혈관계 위험인자를 개선시키는 것을 목표로 해야 한다. 그 증거로 당뇨병 조절과 관련한 대규모 전향적 연구인 UKPDS(United Kingdom Prospective Diabetes Study)의 결과를 보면, 2형 당뇨병에서 설폰요소제(sulfonylurea)나 인슐린으로 10년동안 혈당조절을 했을 때 미세혈관 합병증은 의미있게 감소시켰으나 대혈관 합병증의 발생률은 의미있는 감소를 보이지 못하였다. 반면 대혈관 합병증이 미세혈관 합병증보다 사망에 기여하는 비율이 70배 이상이라는 사실은 당뇨병의 치료가 혈당조절에만 초점이 맞추어져서는 안 되며 심혈관계 위험인자를 개선시키는 치료가 동시에 진행되어야 한다는 점을 시사한다.시료에서 매우 드물게 관찰된다. 음극선발광(cathodoluminescence) 영상의 해석을 통해 저어콘 결정의 성장사를 유추하였으며, 이를 바탕으로 이온현미분석 점(spot)을 정하였다. U-Pb-Th 자료는 퍼스(Perth) 저어콘 스탠다드 (CZ3, 564 Ma, $^{206}$Pb/$^{238}$U=0.0914)를 사용하였다. 아래에 기술하는 연대는 모두 $^{206}$Pb/$^{238}$U 연대에 해당된다. 두 개의 화강암질 편마암 시료로부터 구한 U-Pb 저어콘 연대는 각각 812 $\pm$ 14 Ma(1006-8)와 822 $\pm$ 17 Ma(1006-9)로 분석오차 내에서 서로 일치한다. 이 결과는 춘천 및 전곡 지역의 석류석 각섬암에서 보고된 Sm-Nd 전암연대(852 $\pm$ 24 Ma 및 824 $\pm$ 143 Ma; Lee and Cho, 1995; Ree et al., 1996)와 잘 부합한다. 따라서 후기 원생대 기간 중 화성활동이 한반도에서 광범위하게 일어났음을 시사한다. 한편, 1006-9 시료에서는 예외적으로 한 개의 저어콘 입자 주변부(rim)에서 매우 얇은 과성장띠가 관찰되었으며, 두 개의 점 분석으로부터 구한 U-Pb 저어콘 연대는 약 235 Ma이다. 이 띠는 또한 변성기원의 저어콘에서 흔히 관찰되는 작은 W (<0.05) 비를 보인다. 1006-5 시료는 위 두 시료로부터 수 km 떨어진 지점에서 채집하였으나, 저어콘 연대는 상이한 기록을 보여준다. 즉 매우 작은 Th/U (<0.01) 값을 갖는 저어콘의 주변부에서 223 $\pm$ 5 Ma의 연대가 잘 정의되며, 이는 1006-9 시료에서 관찰된 결과와

• Communications of Mathematical Education
• /
• v.31 no.1
• /
• pp.103-123
• /
• 2017

Mathematical tasks in general introduce and deal with real-life situations, and they derive to students' thinking fluently in solving the given tasks. The tasks might be considered as an important and significant factor to lead a successful mathematical teaching and learning situation. MiC Textbook is a representative one showing such good examples and tasks. This study explores concretely and in detail the cognitive demand level of mathematical tasks, by the subject of MiC Textbook. To accomplish this, this study is to reconstruct more elaborately the analysis framework developed by Hwang and Park in 2013. The framework basically was set up utilizing 'the cognitive demand level' suggested by Stein, et, al. The cognitive demand level is divided into two levels such as low level and high level. The low level is comprized of two elements such as Memorization Tasks(MT), Procedures Without Connections Tasks(PNCT), and high level is Procedures With Connections Tasks(PWCT), and Doing Mathematics Tasks(DMT). This study deals with the tasks on the area of 'data analysis and statistics' in MiC 1, 2, 3 level Textbook. As a result, mathematical tasks of MiC Textbook led learners to deal with and understand mathematical content for themselves, and furthermore to do leading roles for checking and reinforcing the content. Also, mathematical tasks of MiC Textbook are comprized of the tasks suitable to enhance mathematical thinking ability through communication. In addition, mathematical tasks of MiC Textbook tend to offer more learning opportunity to learners' themselves while the level of MiC Textbook is going up.

• 한국해양학회지
• /
• v.7 no.1
• /
• pp.24-45
• /
• 1972

The Han River is an important water source in Seoul and neighbouring districts, for public and industrial supply, and for agriculture and fishery. Nowadays, more than six million inhabitants are supplied withe water from this river. The total length of the river is 470km, and has 17 10$\^$9/㎥ an average annual flow. The hydrographic characteristics at Seoul are 653㎥/sec in an average flow, 4,608㎥/sec in the maximum average flow, and 201㎥/sec in the minimum average flow. These are influenced in some degree by snowmelt in early spring, and greatly by the flood during summer. For the pollution problems, the periods of low flow are critical ones. As a rule they occur around the months November through June. Nowadays, most of the sewage from towns and industries is discharged untreated. Apart from domestic and industrial sewages, there are some discharges of mineral matter by mines in the upriver region. In general, water quality of the Han River is kept very clean and healthy until Kwangnaru of the upper region of Seoul. A large pollution, however, is received in the downstream by the domestic and industrial sewages of Seoul. It can be seen that dissolved oxygen, COD and BOD$\sub$5/ diminish markedly, and the intensity of almost every water parameter of the river continues to increase. Comparison of the figures for 1971 derived from a sampling point 40km downstream of Kwangnaru leads to the conclusion that hardness, Ca and Mg were no changed; alkalinity, Si and soluble- Fe were slightly increased; CO$\sub$2/, acidity, Cl, NO$\sub$2/-N, Cu, Zn and Al were increased in 2 and 3 times; total residue, total ignitious residue, COD, BOD$\sub$5/, NH$\sub$4/-N, PO$\sub$4/-P, Mn, Pb and total-Fe were increased in 4 to 7 times; and SO$\sub$4/, particulate-Fe and Cd were increased in 10 to 11 times. On the other hand, coliforms were increased in 650 times; fecal coliforms in 365 times; enterococci and total plate counts in 30 times, respectively. In view points of water quality standards, the down Han River water is now leveling out in Cd, coliforms and fecal coliforms for the agricultural use; in dissolved oxygen and some trace elements (Cu, Zn, Pb and Cd) for the fishery use; in ammonia, COD, BOD$\sub$5/, and Cd for the drinking use.