• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.629-634
• /
• 2024

The Korea Research Institute of Ships and Ocean Engineering (KRISO) has developed a test module that can vertically ascend and descend with a buoyancy engine to verify the performance of the developed buoyancy engine. The independent test module has been tested in the Ocean Engineering Basin(C.M.Lee et al., 2023). After that, more tests were performed in the Deep Ocean Engineering Basin and at sea. In the 50-meter depth pit test of the Deep Ocean Engineering Basin, there were no problems with the ascent and descent operations, but the buoyancy engine was not properly maintained due to various problems in the independent test module, resulting in a difference between the calculated results using the solution of the equations of motion and the actual measurement results. The East Sea test was conducted at a depth of approximately 110 meters north-east of Pohang, with a dive to 100 meters. The difference between the pressure sensor value and the calculated value was observed, but after checking the results of the underwater position tracking device(USBL, Ultra Short Base Line system), it was estimated that the difference was caused by the influence of the current.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권6호
• /
• pp.1619-1637
• /
• 2024

In today's highly digitized landscape, securing digital communication is paramount due to threats like hacking, unauthorized data access, and network policy violations. The response to these challenges has been the development of cryptography applications, though many existing techniques face issues of complexity, efficiency, and limitations. Notably, sophisticated intruders can easily discern encrypted data during transmission, casting doubt on overall security. In contrast to encryption, steganography offers the unique advantage of concealing data without easy detection, although it, too, grapples with challenges. The primary hurdles in image steganography revolve around the quality and payload capacity of the cover image, which are persistently compromised. This article introduces a pioneering approach that integrates image steganography and encryption, presenting the BitPatternStego method. This novel technique addresses prevalent issues in image steganography, such as stego-image quality and payload, by concealing secret data within image pixels with identical bit patterns as their characters. Consequently, concerns regarding the quality and payload capacity of steganographic images become obsolete. Moreover, the BitPatternStego method boasts the capability to generate millions of keys for the same secret message, offering a robust and versatile solution to the evolving landscape of digital security challenges.

• 여성건강간호학회지
• /
• 제30권2호
• /
• pp.164-173
• /
• 2024

Purpose: This study aimed to investigate the prevalence of postpartum depression (PPD) and stress, as well as factors influencing PPD, among women in Saudi Arabia. Methods: This study employed a cross-sectional online survey and recruited participants during postpartum visits to the Clinic of Gynecology and Obstetrics in Al-Khobar, Saudi Arabia. Data collection was done using Arabic versions of the Edinburgh Postnatal Depression Scale, Perceived Stress Scale, and a sociodemographics and obstetric history questionnaire. Descriptive and inferential analyses were conducted, including multiple linear regression using a stepwise method. Results: Data from the 270 participants showed low levels of postpartum depressive symptoms with a mean score of 2.54±4.5 and low levels of perceived stress with a mean score of 2.49±6.2. While 94.4% of the participants reported low levels of stress and PPD, 5.6% reported elevated levels (≥10 for PPD, ≥14 for stress). The stepwise regression analysis showed significant results (p<.001), accounting for 34% of the variance in PPD. The factors significantly influencing PPD included the type of family, stress, number of abortions, disease during pregnancy, and family income. Importantly, perceived stress emerged as a factor influencing PPD. Conclusion: Although the majority of participants exhibited low levels of PPD, about 1 in 18 showed elevated levels. The identification of significant influencing factors highlights the need for targeted interventions to effectively address mental health concerns in postpartum women.

• 한국초전도ㆍ저온공학회논문지
• /
• 제26권2호
• /
• pp.5-8
• /
• 2024

Recently, Lee et al. claimed that LK-99 isthe first room-temperature superconductor at ambient pressure, which quickly captured the attention of both the scientific community and the general public. We tried to replicate Pb_10-xCu_x(PO₄)₆O, called as LK-99, and characterized its physical properties by measuring the electrical resistance and Meissner effect. The electrical resistance results for different batches exhibited structural phase transitions at different temperatures, and the magnetic measurements indicated weak diamagnetism at 300 K, which is weaker than that of water. Taken together with the structural analysis, these results suggest that the resistivity transitions are incurred by Cu-S compound generated as a byproduct during the synthesis of LK-99 and LK-99 is not a room-temperature superconductor.

• Archives of Plastic Surgery
• /
• 제51권2호
• /
• pp.202-207
• /
• 2024

Background Ingrown toenail is a common condition that results in chronic pain, recurrent infections, and difficulty in performing daily activities. Our aim is to compare two surgical methods for the treatment of ingrown toenails: wedge resection with curetting versus wedge resection curetting followed by electrocauterization of the nail bed. Methods A prospective, comparative study that included 130 patients with ingrown toenails. All patients had stage II or III disease. We divided the participants into two groups according to the type of surgery and all patients were followed up for 6 months. The outcomes measured were the incidence of postoperative bleeding and infection, recovery time, patient satisfaction, and recurrence rate 6 months after surgery. Results Of the 130 patients included, 59 (45.4%) underwent excision and curetting of the nail matrix (group 1) and 71 (54.6%) underwent excision, curetting, and electrocauterization of the nail matrix (group 2). The postoperative infection rates were 20.3 and 4.2% in the first and second groups, respectively (p = 0.004). Patient satisfaction was 76.3% among the first group, while 91.5% of patients in the second group were satisfied with the results of surgery. Six months postoperatively, recurrence rates were 25.4 and 4.2% in the first and second groups, respectively (p = 0.001). Conclusion Wedge excision and curettage, followed by electrocauterization of the ingrown toenail is a safe treatment modality with a high success rate, that is evident by a lower recurrence rate, and greater patient satisfaction, with no effect on postoperative pain score or recovery time.

• 소성∙가공
• /
• 제16권7호
• /
• pp.521-529
• /
• 2007

This paper is concerned with the analysis on the surface expansion of AA 2024 and AA 1100 aluminum alloys in backward extrusion process. Due to heavy surface expansion appeared usually in the backward can extrusion process, the tribological conditions along the interface between the material and the punch land are very severe. In the present study, the surface expansion is analyzed especially under various process conditions. The main goal of this study is to investigate the influence of degree of reduction in height, geometries of punch nose, friction and hardening characteristics of different aluminum alloys on the material flow and thus on the surface expansion on the working material. Two different materials are selected for investigation as model materials and they are AA 2024 and AA 1100 aluminum alloys. The geometrical parameters employed in analysis include punch corner radius and punch nose angle. The geometry of punch follows basically the recommendation of ICFG and some variations of punch geometry are adopted to obtain quantitative information on the effect of geometrical parameters on material flow. Extensive simulation has been conducted by applying the rigid-plastic finite element method to the backward can extrusion process under different geometrical, material, and interface conditions. The simulation results are summarized in terms of surface expansion at different reduction in height, deformation patterns including pressure distributions along the interface between workpiece and punch, comparison of surface expansion between two model materials, geometrical and interfacial parametric effects on surface expansion, and load-stroke relationships.

• 공업화학
• /
• 제35권1호
• /
• pp.1-7
• /
• 2024

NO, CO 및 CH₄의 동시 산화를 위한 4 종의 Mn-M/Al₂O₃ (M = Cu, Fe, Co, Ce) 촉매를 제조하여 산화 활성을 비교하고, 동시 산화활성이 가장 높은 Mn-Cu/Al₂O₃ 촉매에 대해 XRD, Raman, XPS, O₂-TPD 분석을 수행하였다. XRD 분석 결과, Mn-Cu/Al₂O₃ 촉매에서는 담지된 Mn과 Cu는 복합산화물로 존재하였다. Raman 및 XPS 분석을 통해 Mn-Cu/Al₂O₃ 촉매는 Mn-O-Cu 결합의 형성 과정에서 Mn 이온과 Cu 이온 간의 전자 수수가 일어남을 알 수 있었다. XPS O 1s 및 O₂-TPD 분석을 통해 Mn-Cu/Al₂O₃ 촉매는 Mn/Al₂O₃ 촉매에 비해 이동성이 우수한 흡착산소 종이 증가했음을 알 수 있었다. Mn-Cu/Al₂O₃ 촉매의 높은 동시 산화 활성은 이러한 결과에 기인한다고 판단된다. Mn-Cu/Al₂O₃ 촉매 상에서 NO는 CO와 CH₄ 산화를 촉진하지만, NO 산화는 억제되었다. 이는 NO로부터 산화된 NO₂가 CO 및 CH₄의 산화제로 사용되었기 때문이라고 추측된다. CO와 CH₄의 산화 반응은 경쟁하지만 촉매 활성 온도가 다르기 때문에 그 효과가 두드러지지 않았다.

• 한국전기전자재료학회논문지
• /
• 제37권2호
• /
• pp.208-214
• /
• 2024

This reports the electrical properties of single-crystal β-gallium oxide (β-Ga₂O₃) vertical Schottky barrier diodes (SBDs) with a different guard ring structure. The vertical Schottky barrier diodes (V-SBDs) were fabricated with two types guard ring structures, one is with metal deposited on the Al₂O₃ passivation layer (film guard ring: FGR) and the other is with vias formed in the Al₂O₃ passivation layer to allow the metal to contact the Ga₂O₃ surface (metal guard ring: MGR). The forward current values of FGR and MGR V-SBD are 955 mA and 666 mA at 9 V, respectively, and the specific on-resistance (R_on,sp) is 5.9 mΩ·cm² and 29 mΩ·cm². The series resistance (R_s) in the nonlinear section extracted using Cheung's formula was 6 Ω, 4.8 Ω for FGR V-SBD, 10.7 Ω, 6.7 Ω for MGR V-SBD, respectively, and the breakdown voltage was 528 V for FGR V-SBD and 358 V for MGR V-SBD. Degradation of electrical characteristics of the MGR V-SBD can be attributed to the increased reverse leakage current caused by the guard ring structure, and it is expected that the electrical performance can be improved by preventing premature leakage current when an appropriate reverse voltage is applied to the guard ring area. On the other hand, FGR V-SBD shows overall better electrical properties than MGR V-SBD because Al₂O₃ was widely deposited on the Ga₂O₃ surface, which prevent leakage current on the Ga₂O₃ surface.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.148-152
• /
• 2000

The aluminum alloy 6061-T6 has been successfully used in structural applications especially the pressure vessel of the Advanced Neutron Source research reactor. And aluminum alloys, including 6061-T6, have a face-centered-cubic crystals structure. Under normal circumstances face-centered-cubic crystal structures do not exhibit cleavage fractures even at very lo9w temperatures. In aluminum-based structures, plates frequently find use as connecting links. Mechanical fasteners are often utilized in instances where ease of application, familiarity with fabrication processes, and severe dynamic loading are of concern. Plates frequently find use as connecting elements in structures built from aluminum alloys. Many structural elements employ mechanical fasteners. Twenty and twenty aluminum alloy 6061-T6 plates, representing four different bolt patterns, were mechanically deformed. And variable materials such as A1 6061-T6, Al 2024-T3, Carbon/Epoxy, Glass/Epoxy Composite and Woven fiber composite, are used as patch materials. From this experiment, it has been shown that the strength of patch-repaired specimens is different with the patch materials.

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.62-69
• /
• 1999

67Ni-22Cr-10Al-1Y and $ZrO_2-8Y_2O_3$ were coated on the substrate surface of ST304 and Al2024 by the plasma spraying method. The adgesion of the films varies depending on the substrates and the laminating method. In the case of STS304, the cracks were observed at thermal shock temperature difference ${Delta}T$ of $900^{circ}C$ in the non functionally gradient material(NFGM) and at $1100^{circ}C$ in the functionally gradient material(FGM). The film adhesion of the FGM is better than that of the NFGM in ST304. The cumulative AE count of the FGM of STS304 increased continuously at the bending test. But the NFGM of STS304 showed discontinuity of the AE count. The total AE count for the FGM of STS304 decreased as the number of thermal shock increased, and this tendency was evident as the thermal shock temperature difference increased.