• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.2
• /
• pp.107-112
• /
• 2000

$(Sr_{0.85}Ca_{0.15})TiO_3$(SCT) thin films were deposited on Pt-coated $TiO_2/SiO_2/Si$ wafer by the rf sputtering method. Experiments were conducted to investigate the electrical properties of SCT thin films with various top electrodes. Various top electrodes as Pt, Al, Ag, Cu were deposited on SCT thin films by sputter and thermal evaporator. The characteristics of C-F and C-V of SCT thin films were not obviously varied with various top electrodes, SCT thin films annealed at $600^{\circ}C$ represents as favorable capacitance characteristics than SCT thin films not annealed, and Pt top electrode have the most high capacitance. The characteristic of I-V of SCT thin films showed that Pt top electrode revealed more less leakage current density than other electrodes, had a leakage current density below 10-8$[A/cm^2]$ until 25[V] applied voltage.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.7
• /
• pp.339-343
• /
• 2006

In this study, the variations of the important characteristics of solenoid-type RF chip inductors utilizing a low-loss A1203 core material on inductor dimensions were investigated systematically. Four dimensions of the chip inductors fabricated in this work were $1.0\times0.5\times0.5mm^3,\;1.5\times1.0\times0.7mm^3,\;2.1\times1.5\times1.0mm^3,\;and\;2.4\times2.0\times1.4mm^3$ and copper (Cu) wire with $40{\mu}m$ diameter was used as the coils. High frequency characteristics of the inductance, quality factor, and impedance of developed inductors as a function of inductor dimensions were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). It was observed that the developed inductors with the number of turns of 6 have the inductance (L) of 12 to 82 nH and exhibit the self-resonant frequency (SRE) of 3.6 to 1.2 GHz. The SRF of inductors decreases with increasing the inductor size while the L increases with the inductor size. The smallest inductors of $1.0\times0.5\times0.5mm^3$ exhibited the L of 12 nH, SRF of 3.6 GHz, and the quality factor of 67 near the frequency of 1.1 GHz. The calculated data predicted the high-frequency data of the L, and Q of the developed inductors well.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.4
• /
• pp.43-50
• /
• 2012

Metal-metal oxide (M-M oxide) cermet solar selective coatings with a double cermet layer film structure were deposited on the Al-deposited glass substrate by using a directed current (DC) magnetron sputtering technology. M oxide (CrO and ZrO) was used as the ceramic component in the cermets, and Cr and Zr used as the metallic components. In addition, black Cr (Cr-$Cr_2O_3$ cermet) solar selective coatings were deposited on the Ni-plated Cu substrate by using a electroplating method for comparison. The thermal stability tests were carried out for performance evaluation of solar coatings. Reflectance measurements were used to evaluate both solar absorptance(${\alpha}$) and thermal emittance (${\epsilon}$) of the solar coatings before and after thermal testing by using a spectrometer. Optical properties of optimized cermet solar coatings were ${\alpha}{\simeq}0.94-0.96$ and ${\epsilon}{\simeq}0.1$ ($100^{\circ}C$). The results of thermal stability test of M-M oxide solar coatings showed that the Cr-CrO cermet solar selective coatings were more stable than the Zr-ZrO cermet selective coatings at temperature of both $400^{\circ}C$ in air and $450^{\circ}C$ in vacuum. The black Cr solar selective coatings were degraded in air at temperature of $400^{\circ}C$. The main optical degradation modes of these coatings were diffusion of metal atoms, and oxidation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.4
• /
• pp.312-317
• /
• 2005

The objectives of this paper are to study the absorption characteristics of $NH_3$ bubbles in the binary nanofluids and to quantify the effects of surfactants and nano-particles on the bubble absorption performance. 2-Ethyl-1-Hexanol, n-Octanol, and 2-Octanol are used as the surfactants and nano-sized $Al_{2}O_3$ and Cu particles are added to make the binary nanofluids into $NH_3/H_{2}O$ solution. The concentration of $NH_3$ solution ($x_s$), the concentration of surfactants ($x_{SA}$), and the mass fraction of nano-particles ($w_{np}$) are considered as key parameters. The experimented ranges of $x_s,\;x_{SA},\;and\;w_{np}$ are $0{\sim}17.92\%,\;0{\sim}1,500\;ppm\;and\;0{\sim}0.2\%$, respectively. The absorption rates are calculated by measuring initial and final weights of test section and exposed time. In addition, the bubble absorption processes are visualized using the shadow graphic method. The results show that the absorption performance is significantly enhanced up to 4 times by adding the surfactants and up to 3 times in the binary nanofluids.

• The Research Journal of the Costume Culture
• /
• v.18 no.2
• /
• pp.371-381
• /
• 2010

The pine needles can be used for four seasons in normal living and it can be taken friendly everywhere as it is distributed over 50% in Korea. The pine needles consist of vitamins, protein, minerals, essential oil and enzyme related to antimicrobial activity. It has effect like high blood pressure, neuralgia and hanged over by terpene, glucokinin, rutin, apigenic acid and tannin. Also the extract of them can be used for dyeing of fabrics. However, the extract components and effects of them are not well known yet. Therefore, the purpose of this study was to investigate the volatile components of the pine needles extract and functionality. The pine needles extract was dyed into various fabrics(nylon, silk, wool and soybean) and mordanted with Al, Cu, Cr, Fe and Sn. The extracted aroma compounds were compared by gas chromatography-mass spectrometry. The major volatile compounds of pine needles verified by using SPME were alpha-pinene, beta-pinene, beta-phellandrene, caryophyllene, ethanon, benzen. A total of 15 compounds were identified by using the SPME fibers. In the UV-visible spectra, the maximum absorption of wavelength of the pine needles ethanol extract appeared at 460, 630nm for chlorophyll component and at 237, 281nm for tannin component with the pine needles distilled water extract. Most of sample showed high antibacterial effect in none mordant but wool fabric showed high antibacterial effect in mordants. The result of UV block test showed a superior ability of blocking ultraviolet ray infiltration in all sample.

• The Research Journal of the Costume Culture
• /
• v.17 no.4
• /
• pp.575-582
• /
• 2009

The coffee has been used as drink in the world and it has been using not only food but also dyeing. It can be used for four seasons in our normal living and it can be taken friendly everywhere. The coffee consists of about 8${\sim}$10% phenol(chlorogenic acid) that related to antioxidant and antimicrobial activity. However, its exact components and the dyeing property effects has not been well known yet. Therefore, the purpose of this study was to investigate the dyeing property and ultraviolet-cut ability of silk and nylon fabrics that was dyed variously with coffee extracts. Coffee extracts were done by boiling coffee with distilled water at $100^{\circ}C$ for 2 hours. As mordanting agent, we used $AlK(SO_4)_2$ $12H_2O$, $CuSO_4$ $5H_2O$, $FeCl_2$ $4H_2O$. As the result of the dyeing properties and ultraviolet-cut ability of fabrics dyed with coffee bean extracts, we can find that the optimum dyeing temperature and dyeing time of the silk and nylon fabrics dyed with coffee bean extracts was $90^{\circ}C$, 60 min. and the colorfastness of washing and dry-cleaning was improved by using mordanting agent(4${\sim}$5 grade). Ultraviolet-cut ability was showed more 90% in dyed nylon fabrics.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1099-1107
• /
• 1992

The apparent strain of temperature self-compensated strain gages at cryogenic temperature is presented. By joining the international round robin test on electrical strain gages at cryogenic temperatures, apparent strain curves of up to the fourth order with respect to the temperature are obtained with different strain gages and different materials. The liquid nitrogen and the liquid helium are employed to get the cryogenic environment. The results can be effectively utilized to determine the real strains by mechanical loading at cryogenic temperature. This paper also describes the optimal selection of strain gages and test materials for the use of strain gages at cryogenic temperature.

• Applied Biological Chemistry
• /
• v.35 no.2
• /
• pp.82-86
• /
• 1992

This research was carried out to investigate antimutagent effect of peach enzymatic browning reaction products(PEBRP) obtained by reacting each of polyphenol compounds with oxidase extracted from Korea-cultivated peach. In methods, rec-assay with B. subtilis strains $H17(rec^+)\;and\;M45(rec^-)$, and Ames test with S. typhimurium TA98 and TA100 were used. The spore rec-assay of PEBRP, pyrogallol, hydroxyhydroquinone, homocatechol and caffeic acid were not showed mutagenicity. In the effects of various metal ions$(Al^{3+},\;Cu^{2+},\;Fe^{2+},\;Mn^{2+},\;Ni^{2+},\;Pb^{2+},\;Zn^{2+})$ on the rec-assay, all PEBRP except caffeic acid was increased inhibition zone(5 mm) only with $Zn^{2+}$. In paticular, the Py-PEBRP was decreased the difference of inhibition zone of growth on MMC(mitomycin C). In results of Ames test, all PEBRP were not showed mutagenicity on S. typhimurium TA98 and TA100; however, Ca-PEBRP and Hca-PEBRP were suppressed mutagenic effects on Trp-P-1 and B(a)P in the presence of S-9Mix.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.3
• /
• pp.139-146
• /
• 1978

The annual variations of some heavy metal concentrations, Al, Mn, Fe, Cu, Pb, Zn, Cd, Hg were determined on tile day of spring tides in every month from May 1977 to April 1978 at eight stations in the Nagdong River downstream. Samples were taken at intervals of one or two hours from 7 a.m. to 7 p.m. at each station. Annual ranges and means of concentrations of the heavy metals are as follows : aluminium 40.7-3700 ppb, 286 ppb; manganese 10.3-261.5 ppb, 80.8 ppb; iron ND-1237 ppb, 147.7 ppb; copper ND-30.9 ppb, 2.49 ppb; lead ND-29.9 ppb, 1.10 ppb; zinc ND-156.8 ppb, 5.61 ppb; cadmium ND-1.22 ppb, 0.09 ppb; mercury ND-0.37 ppb, 0.02 ppb respectively. In general, the contents of heavy metals except managanese and mercury were higher at the stations above station one, Kupo, though the ranges of the contents showed remarkable difference according to the sampling stations. Annual means of the concentrations of iron and manganese were exceeded already the desirable standards for industrial water and closed to the criteria of raw water for public supply. The values that over the criteria of raw water were sometimes found. Mercury concentration showed comparative high level such as ND-0.37 ppb in annual range but it was not over the environment criterion, 0.5 ppb. Aluminium, iron and mercury showed generally high values in summer period and other metals in winter period, through the patterns of seasonal variations were difference depending on the sampling stations and the kind of metals.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.6
• /
• pp.260-268
• /
• 2015

The thermal barrier coating (TBC) for inner wall of liquid-fuel rocket combustor consists of NiCrAlY as bonding layer and $ZrO_2$ as a top layer. In most case, the plasma spray coating is used for TBC process and this process has inherent possibility of cracking due to large difference in thermal expansion coefficients among bonding layer, top layer and metal substrate. In this paper, we suggest crack-free TBC process by using a precise electrodeposition technique. Electrodeposited Ni-P/Cr double layer has similar thermal expansion coefficient to the Cu alloy substrate resulting in superior thermal barrier performance and high temperature oxidation resistance. We studied the effects of phosphorous concentrations (2.12 wt%, 6.97 wt%, and 10.53 wt%) on the annealing behavior ($750^{\circ}C$) of Ni-P samples and Cr double layered electrodeposits. Annealing temperature was simulated by combustion test condition. Also, we conducted SEM/EDS and XRD analysis for Ni-P/Cr samples. The results showed that the band layers between Ni-P and Cr are Ni and Cr, and has no formed with heat treatment. These band layers were solid solution of Cr and Ni which is formed by interdiffusion of both alloy elements. In addition, the P was not found in it. The thickness of band layer was increased with increasing annealing time. We expected that the band layer can improve the adhesion between Cr and Ni-P.