• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1252-1257
• /
• 2003

This paper present a procedure of meter-out flow control method for dump valve in full-scale airframe test. Emergency stop, which results in dump state, can be happened during full-scale airframe test by several causes. Because servo valve can't control hydraulics actuator in the dump state, pressure in cylinder chamber may rise abruptly and overload can be acted to the test article. In this paper, the procedure and technology of orifice setting are investigated to protect the test article from unexpected loads by dump. The test results show that the presented methods decrease peak loads and improve unloading characteristics of hydraulic actuators in the dump state.

• Advances in aircraft and spacecraft science
• /
• 제7권6호
• /
• pp.553-570
• /
• 2020

To address the problems caused by the strong coupling of an airbreathing hypersonic vehicle's airframe and propulsion to the integrated control system design, an integrated airframe-propulsion model is established, and the coupling characteristics between the aircraft and engine are analyzed. First, the airframe-propulsion integration model is established based on the typical nonlinear longitudinal dynamical model of an air-breathing hypersonic vehicle and the one-dimensional dual-mode scramjet model. Thrust, moment, angle of attack, altitude, and velocity are used as transfer variables between the aircraft model and the engine model. The one-dimensional scramjet model can accurately reflect the working state of the engine and provide data to support the coupling analysis. Second, owing to the static instability of the aircraft model, the linear quadratic regulator (LQR) controller of the aircraft is designed to ensure attitude stability and height tracking. Finally, the coupling relationship between the aircraft and the engine is revealed through simulation examples. The interaction between vehicle attitude and engine working condition is analyzed, and the influence of vehicle attitude on engine safety is considered. When the engine is in a critical working state, the attitude change of the aircraft will not affect the engine safety without considering coupling, whereas when coupling is considered, the attitude change of the aircraft may cause the engine unstart, which demonstrates the significance of considering coupling characteristics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.567-568
• /
• 2007

• 한국항공우주학회지
• /
• 제36권4호
• /
• pp.375-383
• /
• 2008

완성무기 운반형 유도탄의 설계에는 고속비행 중 탑재물 투하에 적합한 안정성과 신뢰성 높은 기체분리 및 낙하산 전개 메커니즘이 요구된다. 이 전개 메커니즘은 다물체들 상호간의 역학적 운동 관계를 나타내는 것이므로 설계에서 모델링 & 시뮬레이션을 이용한 해석적 연구가 매우 중요한 역할을 할 수 있다. 본 논문에서는 크램쉘형 기체분리를 채택한 국내 대잠유도탄 설계에 적용된 기체분리 시뮬레이션 기법을 제시하고, 이를 이용한 주요 해석 결과를 가용한 비행시험 결과와 대비하여 보였다. 본 기법 연구의 초점은 효과적인 설계 적용의 필수적 요소인 계산의 신속성과 신뢰도 간의 적절한 조화에 주어졌다.

• 한국항공운항학회지
• /
• 제22권2호
• /
• pp.27-33
• /
• 2014

There are several methods to improve the flight efficiency of HALE(High Altitude Long Endurance) UAV(Unmaned Aerial Vehicle). Airframe structural point of view, weight reduction of the airframe structure is the most important method to improve the flight efficiency. In order to reduce the weight of airframe structures, new concepts which are different from traditional airframe structure design such as the mylar wing skin should be introduced. The spar is the most important component in a mylar skin wing structure, so the spar weight reduction is the key point for reduction of the wing structural weight. In this study, design trade-off study for the front spar of the HALE UAV wing is conducted in order to reduce the weight. Design and analysis procedure of high aspect ratio wing spar are introduced. Several front spar structures are designed and trade-off study regarding the weight and strength for the each spar are performed. Spar design configurations are verified by the static strength test. Finally, optimal front spar design is decided and applied to the HALE UAV wing design.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.651-661
• /
• 2017

A truss-braced wing (TBW) aircraft has recently received increasing attention due to higher aerodynamic efficiency compared to conventional cantilever wing aircraft. For conceptual TBW aircraft design, we developed a propulsion-and-airframe integrated design environment by replacing a semi-empirical turbofan engine model with a thermodynamic cycle-based one built upon the numerical propulsion system simulation (NPSS). The constructed NPSS model benefitted TBW aircraft design study, as it could handle engine installation effects influencing engine fuel efficiency. The NPSS model also contributed to broadening TBW aircraft design space, for it provided turbofan engine design variables involving a technology factor reflecting progress in propulsion technology. To effectively consolidate the NPSS propulsion model with the TBW airframe model, we devised a rapid, approximate substitute of the NPSS model by reduced-order modeling (ROM) to resolve difficulties in model integration. In addition, we formed an artificial neural network (ANN) that associates engine component attributes evaluated by object-oriented weight analysis of turbine engine (WATE++) with engine design variables to determine engine weight and size, both of which bring together the propulsion and airframe system models. Through propulsion-andairframe design space exploration, we optimized TBW aircraft design for fuel saving and revealed that a simple engine model neglecting engine installation effects may overestimate TBW aircraft performance.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1129-1136
• /
• 2004

The structural modification to install a heavy sensor was made at the front extremities of the foreign-produced helicopter operated in the Korea Navy Mounting the sensor directly to the nose structure is unlikely to be practical because it lowers a dynamic mode of the airframe close to rotor blade passing frequencies, leading to increased helicopter vibration. Unfortunately we have no information on dynamic characteristics of the imported helicopter. So the experimental modal model derived from shake testing on the overall airframe of a working helicopter was used to solve the sensor Installation problems. The sensitivity analysis was done to evaluate what the best of modification woo)d be. Simple ID model and experimental modal data for mount system with sensor were Incorporated into overall dynamic model to assess the effects of the sensor installation on helicopter. Modal testing for the modified helicopter shows that the airframe modes are sufficiently displaced from rotor passing frequencies. The mount system has been proven fight to be sufficiently stable to meet vibration-level requirement for all required operational profiles.

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.33-38
• /
• 2005

로터 블레이드 가진 주파수에서의 가진력이 헬리콥터 진동의 주요 요인이다. 이 로터 블레이드 가진 주파수는 일반적으로 10~30 Hz 영역이고 관심 기체 모드들도 이와 유사하다. 그런데 해외 제작 헬리콥터 전방 끝단에 무거운 센서를 장착하는 것은 기체의 동적 특성 변화를 가져와 로터 가진 주파수와 공진을 유발할 수 있다. 전 기체의 동적 특성에 변화를 유발하지 않도록 하기 위해, 무거운 센서를 어떻게 장착할 것인지를 개념적 접근 및 유한요소 해석을 통해 결정하였다. 센서 마운트 시스템이 장착된 전 기체의 지상 진동시험 결과는 장착 설계가 타당함을 보여준다.

• 한국항공우주학회지
• /
• 제32권6호
• /
• pp.117-125
• /
• 2004

본 논문에서는 기체 구조건전성 기준서 (MIL-HDBK-1530B) 및 기체 구조건전성 프로그램 (ASIP)에 의거하여 고등 훈련기 (T-50)의 구조건전성평가와 양산 결정자료 획득을 위한 전기체 내구성시험 기법 개발에 대하여 기술하였다. 전기체 부유식 시험조립 기법, 시험하중 최적화 모사 기법, 시험부가 장치 설계 시법, 시험조립 기법, 및 설치 기법, 시험안전장치 설계 및 운용 기법 및 전기체 내구성시험 수행 결과를 수록하였다. 1배 수명 전기체 내구성시험을 성공적으로 수행함으로써 시험기법의 타당성을 입증하였다.

• 한국항공우주학회지
• /
• 제46권9호
• /
• pp.723-734
• /
• 2018

20kg 미만의 중소형 멀티콥터의 초기 사이징 과정에서 적용 가능한 기체 구조 중량 예측에 관한 연구를 소개한다. 임무장비를 제외하고 멀티콥터는 기체 구조, 모터, 프로펠러, 배터리 등으로 구성되는데, 모터, 프로펠러, 배터리 등의 중량은 설계변수에 따른 추세선을 통해 추정이 가능하다. 하지만 기체 구조 중량은 멀티콥터의 형상과 설계 개념이 다양하고, 대부분의 상용 제품들이 기체 구조 중량 데이터를 제공하지 않기 때문에 추세선을 통해 예측할 수 없다. 본 논문에서는 기본적인 멀티콥터 형상을 정의하고 멀티콥터 사이징 초기 단계에서 결정되는 프로펠러 개수와 직경을 통해 멀티콥터 기체 구조 중량을 추정하는 방법을 제안하였다. 제안한 방법은 구조 중량이 제시된 멀티콥터 제품들을 통해 검증하여 그 유용성을 확인하였다.