• Journal of Institute of Convergence Technology
• /
• v.5 no.2
• /
• pp.27-32
• /
• 2015

Air intakes are an essential component of aircraft engines. They are mainly used to offer uniform airflows to engine faces. Fighter aircraft have to mask the engine face inside the fuselage in order to reduce the Radar Cross Section(RCS). Therefore, offset intakes like a S-Duct are one of promising components for this purpose. During a fight, it is unavoidable that the flow will enter the intakes at some face angles other than zero. In this case, the performance of the aircraft engine will be influenced to the angle of incidence. In this study, the CFD analysis of the semi-circular S-Duct with AR(0.5,0) is performed to investigate the influence of the angle of incidence on the performance of the S-Duct using a distortion coefficient. To consider the adverse pressure gradient, a $k-{\omega}$ SST turbulence model is employed. The secondary flow and flow separation are observed for all computational cases. It is found that the positive incidence angle produces the best performances.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.277-284
• /
• 2013

In this paper, the ventilating and heating system of T-103 trainer aircraft were investigated and redesigned to improve its poor performance. The ventilation system of the trainer was designed to increase the mass flow rate of fresh air by using air intake valves. The flow-in air through the air intake valve is supplied to the cabin by the ram effect of aircraft and the propeller. And the additional heating system was installed to improve the temperature of the cabin inside. The wasted heat from the exhaust gas of the engines was used as heat source of the additional heating system by installing an heat exchanger around the exhaust nozzle. The additional fresh air and the heated air enter the cabin via two ducts mounted under the instrument panel and behind the pedal in the cabin. The additional ventilating and heating system can be controlled by the first pilot and the secondary pilot individually using the control knob equipped separately. After mounting the additional ventilating and heating system, evaluations such as inspection of parts and component, ground run-up test, in-flight test, user test, etc. were conducted. The result of the tests was sufficient to meet the requirements of the manuals, and the pilots were satisfied with the additionally mounted systems.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.84-90
• /
• 2014

The high pressure hoses are widely used for the vehicles, aircraft, and overall industries. The hose assembly is generally composed of a nipple, a socket and a hose with reinforcement layers to increase the tensile strength. To produce the hose assembly, crimping or swaging process is usually used to clamp its components to ensure the prevention of fluid leakage. Crimping is a cold-working technique to form a strong bond between the workpiece and a non-metallic component. The crimping stroke is a primary parameter to be determined in the metalworking process, and it plays an important role in hose performance. This study aims at investigating the optimal crimping stroke according to the size of aircraft high pressure hose by using MSC/MARC. It is supposed that the results can be useful to get the information about the crimping stroke in manufacturing process, even with the different size of a hose.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.193-201
• /
• 2013

Propeller is an important component of Human Powered Aircraft (HPA) propulsion system. HPA uses large diameter low rotational speed propeller to get high propeller efficiency. The propeller was designed by HPA propeller designing program. The propeller pitch is adjustable by rotating the blade axis angle at ground. Performance of the propeller for various parameters are analysed by the same program used for design. Off-design condition performance was also checked including pilot power change and flight speed change. The propeller was manufactured in ultra-light structure using carbon composite material down to 950g. The propeller was ground tested on ironbird and installed on KARI HPA. Finally the HPA flew 291m with this propeller.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.258-261
• /
• 2007

The objective of this paper is to examine the ways in which to implement MEPS method for setting the design and operational limits in order to provide the guaranteed performance of the aircraft engine. Direct adder arithmetically added and related with the effects of ambient humidity, engine quality, throttle set tolerance and deterioration, etc is described with the random adder added in root square sum. The method was applied on the preliminary design of 4,000Ib class turbofan engine and the MEPS for engine component design and operational margin was generated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.991-994
• /
• 2017

In hypersonic aircraft, increase of aerodynamic and engine heat lead thermal load in airframe. It could lead structural change of aircraft's component and malfunctioning. Endothermic fuels are liquid hydrocarbon fuels which are able to absorb the heat load by undergoing endothermic reactions. In this study, we investigated the method of measuring the heat sink of catalyst by using exo-tetrahydrodicyclopentadiene as a fuel in a packed bed flow reactor similar to the actual reaction conditions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.81-87
• /
• 2018

In hypersonic aircraft, increase of aerodynamic and engine heat lead thermal load in airframe. It could lead structural change of aircraft's component and malfunctioning. Endothermic fuels are liquid hydrocarbon fuels which absorb the heat load by undergoing endothermic reactions. In this study, we investigated the relationship between product, coke formation and catalytic properites of endothermic catalysts by using exo-tetrahydrodicyclopentadiene as a fuel in a fixed bed flow reactor similar to the actual reaction conditions.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.4
• /
• pp.75-87
• /
• 2015

A redundant structure typically consists of primary component and standby component taking over the function of the primary component when the primary component fails. In this research, we consider a redundant structure in which a standby component can take over the function of more than one primary component when primary components fail. And we assume that the system has multi-state according to the states of components while all components have two states. This system is called as the multi-state redundant system with a multi-functional standby component. This type of redundant structure is frequently adapted by the system such as an aircraft in which the weight is an important design factor. In this paper, we propose new reliability model for this multi-state redundant system with a multi-functional standby component in order for evaluating the reliability of the system. Under the assumption that all components have constant failure rate, we evaluate the reliability of the system by applying Markov analysis method. And we investigate the effect of the multi-functional standby component by comparing reliabilities of the parallel system with multi-functional standby component and a simple parallel system and a parallel system with redundant structure.

• Journal of Mechanical Science and Technology
• /
• v.15 no.6
• /
• pp.776-787
• /
• 2001

The turbofan engine performance analysis for a medium scale commercial aircraft was carried out and the LQR control scheme for performance optimization was studied. By using scaled component maps from well-known CF6 engine characteristics, the steady-state performance analysis result was compared with BR715-56 engine performance data. The transient performance analysis was performed with four fuel schedules. The linear simulation was done at the maximum take-off condition. The real time linear simulation was performed by interpolation of the system matrices, which used the least square method as the function of LPC rotational speed. By using linear system matrices of design point, the LQR controller which used control variables for the fuel flow and the LPC bleed air was designed.

• Journal of Aerospace System Engineering
• /
• v.17 no.5
• /
• pp.58-62
• /
• 2023

In this work, the structural integrity was investigated of the structural design results of internal components for the aircraft engine. The radiator and intercooler were combined with the internal components of the engine. Therefore, the safety of the radiator and intercooler was investigated during flight conditions. The structural integrity was evaluated through structural analysis, using the finite element analysis method. The acceleration load for structural design and analysis was considered. The structural safety evaluation found the structural design results to be valid.