• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.358-364
• /
• 2022

The Inter Communication System for avionics is in charge of processing all voice signals that internal calls between Pilot and Co-pilot, internal calls between Pilots and Crews, external calls through communication equipment such as Ultra/Very High Frequency Receiver/Transmitter(U/VHF RT), audio signal monitoring for navigation and mission equipment such as VHF Omnidirectional Range/Instrument Landing System(VOR/ILS), Tactical Air Navigation(TACAN), audio signal output for voice recording to Flight Data Recorder(FDR) and Data Transfer System(DTS), and warning/caution audio signal generate about the status and threat of aircraft. Because Inter Communication System for avionics is sensitive to noise in the case of analog audio signals, a redundant design that can protect audio signal from electromagnetic noise inside/outside of aircraft is required for the mission of pilots and crews. In this paper, Normal/Back-up operation mode and redundancy design plan based on digital method for the redundancy of the digital Inter Communication System for avionics and manufacturing, verification results are described.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.1
• /
• pp.22-31
• /
• 2014

Military UAV(Unmanned Aerial Vehicle) operated as a RC(Remotely Control) model level within the limit of the military special use airspace until now. However, the high and medium altitude of URA(Unmanned Reconnaissance Aircraft) which the ROKAF have been trying to import recently is at the UAV level and needs the criteria for the classified airspace flights. The required flight criteria includes operator location, mission operation limit, equipment, etc., which are the principle and standard applied based on the airspace use for UAV. Also, the general flight rules, visual flight rules, instrument flight rules are required in order to have to be applied to the actual flight. Besides, an appliance regulation needs to be arranged regarding two-way communication, ATC and communication issue, airspace and area in-flight between UAS( Unmanned Aircraft System) users. An operation of the UAV in the air significantly requires the guarantee of the aircraft's capacity, and also the standardized flight criteria. A safe and smooth use is ensured only if this criteria is applied and understood by the entire airspace users. For the purpose, a standardized military UAV flight operations criteria that is to be applied for each airspace by UAV is to be prepared through analysis of the present state, a legend UAV system, and a special character analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.1011-1017
• /
• 2013

The human voice is the most natural means of communication. The need for speech recognition technology is increasing gradually to increase the ease of human and machine interface. The function of the avionics equipment is getting various and complicated in consequence of the growth of digital technology development, so that the load of pilots in the fighter aircraft must become increased since they don't concentrate only the attack function, but also operate the complicated avionics equipments. Accordingly, if speech recognition technology is applied to the aircraft cockpit as regards the operating the avionics equipments, pilots can spend their time and effort on the mission of fighter aircraft. In this paper, the cockpit voice command system applicable to the fighter aircraft has been developed and the function and the performance of the system verified.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.773-778
• /
• 2014

Aircraft communication system which provides internal communications between pilots in an aircraft and external communications between pilots and operators in ground tower with them. It is very important equipment in terms of mission and safety. It wouldn't meet performance requirements with only functions of transmission and receiving of signals. It should provide highly clear voice quality without any noise. This paper analyzes the cause of noise during internal communications and summarizes the design changes applying single point ground concept to solve the problem. It also describes the results of fight test to verify the design changes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.320-326
• /
• 2021

AVTE(Air Vehicle Test Equipment) is an equipment to inspect and check the status of on-board aircraft LRUs(Line Replacement Units) before and after flight for performing successful UAV(Unmanned Aerial Vehicle) missions. This paper suggests utilization of the AVTE as an operation support-equipment by implementing several critical functions for UAV-operation on the AVTE. The AVTE easily sets initialization(default) data and compensates for the installation and position errors of the LRUs which provide critical mission data and situation image with pilots without additional individual operation support-equipment. Major fault list and situation image data could be downloaded after flight using the AVTE in the event of UAV emergency situation or unusual occurrence on duty as well. We anticipate the suggested operational approach of the AVTE could dramatically reduce the cost and man power for design and manufacture of additional operation support equipment and effectively diminish workload of the operator.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.497-504
• /
• 2021

This paper presents improvement of the reception noise suppression method during formation flights of aircraft. Since aircraft communication equipment is very important for flight mission and safety to perform the functions of internal/external communications, it is required to implement noise-free, clean communication quality, and transmitting/receiving functions. Therefore, the FTA (Fault Tree Analysis) analysis and failure search were performed on the reception noise, and the internal noise of the intercom that affected the reception noise and the none-transmition phenomenon was identified. We changed the multiple grounds of the intercom to a single ground and applied an improved method of filtering the DC Offset voltage. As a result, the voice quality of the communication system of the aircraft was improved through the reduction of the reception noise during formation flights, and it was verified by ground and flight tests.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.32-39
• /
• 2019

Sensor pods mounted on the exterior of the aircraft used for tactical missions should have a fatigue life based on the expected load spectrum during operation. For mission equipment such as the sensor pod, the frequency fatigue life prediction method which applies the dynamic vibration environment condition is preferred due to the efficiency of the analysis. In this paper, a fatigue life prediction method in the frequency domain where stress due to static and dynamic loads is synthesized based on the actual flight load spectrum is proposed. After comparison with the existing analysis method, the fatigue life of the proposed analysis method was predicted conservatively. The proposed sensor pods satisfy the requirements of the fatigue life.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.598-606
• /
• 2011

The importance of avionics systems has increased to a significant level in modern aircraft development. Modern avionics system is a complex integrated system of state-of-art hardware and software technology. Specifying the avionics system architecture is the most important task throughout the avionics system design process. This paper reviews modern avionics system architectures and proposes an effective avionics architecture suitable for modern attack helicopters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.783-785
• /
• 2013

In this paper, analyzed of UAVs operation altitude and range from the point of view of the data link. UAVs operation altitude is determined by the specification of the mission equipment and operational purposes. The link-of-sight analysis of data link equipment before deciding the unmanned aircraft operation altitude conditions should be considered. If GDT=0m installation then 32dBi antenna apply 13,724 meter is operation altitude. 44dBi antenna 6,657 meters. Operating altitude perspective, high-gain antenna is recommended of the long range communication.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.4
• /
• pp.344-350
• /
• 2014

Multi Function Display(MFD) of Korean Utility Helicopter(KUH) is the component of mission management/display control system and displays image information(navigation, flight, survivability, digital map, maintenance) acquired from Mission Computer(MC) while the aircraft is operated. It is an essential equipment for pilots to perform flight mission and it has functions of display scene control, data display, built in test(BIT) and brightness control. In this paper, it is analyzed the cause of abnormal display(flickering) on MFD and summarized the design changes to solve the defect. It is also described system safety analysis and suggested verification results of flight/ground test.