• 한국항공우주학회지
• /
• 제49권1호
• /
• pp.31-40
• /
• 2021

현대의 항공기는 고성능이면서도 경량이다. 그래서 유연한 구조물의 특성이 나타나며 비행 성능에 영향을 미치거나 한계를 짓기도 한다. 이러한 유연 특성은 항공기 설계 초기 단계부터 분석이 필요한데, 이를 위해 유연 항공기의 동적·정적 거동을 분석할 수 있는 프로그램을 개발하였으며, 그 결과를 제시한다. 다물체 동역학 시뮬레이션 기법에 기반하여, 강체 비행 역학, 구조 진동 거동, 그리고 비정상 공기력 등을 세부 모듈로 개발하고 통합하였다. 마지막으로, 통합 시뮬레이션 프로그램을 이용하여 유연 특성 항공기의 등속 수평 비행과 선회비행을 분석하였다.

• Advances in aircraft and spacecraft science
• /
• 제7권6호
• /
• pp.475-493
• /
• 2020

This paper is focused on the characterization of the thermomechanical properties of semicrystalline poly-ether-ether-ketone (PEKK) and of carbon fiberreinforced thermoplastic based laminated composites (C/PEKK) below and above the glass transition temperature (T_g). Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA) and tensile tests are carried out on both pure PEKK polymer and [(±45)₂, +45]_s C/PEKK composite samples, showing a significant similarity in behavior. The employment of a simple micromechanical model confirms that the mechanical and physical behavior of the polymer and that of the matrix in the composite are similar.

• Structural Engineering and Mechanics
• /
• 제61권4호
• /
• pp.441-451
• /
• 2017

The need of progress in engineering designs especially for aerospace structure is nowadays becoming a major industry request. The objectives of this work are to quantify the influence of material and operational uncertainties on the performance of the aerodynamic behavior of an Aircraft Wing, and to give a description of the most commonly used methods for reliability based design optimization (RBDO) to point out the advantages of the application of this method in the design process. A new method is proposed, called Safest Point (SP) that can efficiently give the reliability-based optimum solution for freely vibrating structures with and without fluid flow.

• Structural Engineering and Mechanics
• /
• 제17권1호
• /
• pp.29-50
• /
• 2004

A total life model was developed to assess the service life of aging aircraft. The primary focus of this paper is the development of crack growth life projection using the response surface method. Crack growth life projection is a necessary component of the total life model. The study showed that the number of load cycles N needed for a crack to propagate to a specified size can be linearly related to the geometric parameter, material, and stress level of the component considered when all the variables are transformed to logarithmic values. By the Central Limit theorem, the ln N was approximated by Gaussian distribution. This Gaussian model compared well with the histograms of the number of load cycles generated from simulated crack growth curves. The outcome of this study will aid engineers in designing their crack growth experiments to develop the stochastic crack growth models for service life assessments.

• Structural Engineering and Mechanics
• /
• 제53권1호
• /
• pp.73-87
• /
• 2015

In case of aircraft impact on nuclear containment structures, the initial kinetic energy of the aircraft is transferred and absorbed by the outer containment, may causing either complete or partial failure of containment structure. In the present study safety analysis of BWR Mark III type containment has been performed. The total height of containment is 67 m. It has a circular wall with monolithic dome of 21m diameter. Crash analysis has been performed for fighter jet Phantom F4. A normal hit at the crown of containment dome has been considered. Numerical simulations have been carried out using finite element code ABAQUS/Explicit. Concrete Damage Plasticity model have been incorporated to simulate the behaviour of concrete at high strain rate, while Johnson-Cook elasto-visco model of ductile metals have been used for steel reinforcement. Maximum deformation in the containment building has reported as 33.35 mm against crash of Phantom F4. Deformations in concrete and reinforcements have been localised to the impact region. Moreover, no significant global damage has been observed in structure. It may be concluded from the present study that at higher velocity of aircraft perforation of the structure may happen.

• Structural Engineering and Mechanics
• /
• 제78권1호
• /
• pp.31-39
• /
• 2021

To investigate numerically the effect of all parameters on the outcome of an aircraft impact into robust engineering structures like nuclear power plant containments is a tedious task. In order to reduce the problem to a manageable size, we propose a single dimensionless parameter, the damage potential, to characterize the main features of the impact. The damage potential, which is the ratio of the initial kinetic energy of the aircraft to the work required to crush it, enables us to find the crucial parameter settings that need to be modelled numerically in detail. We show in this paper that the damage potential is indeed the most important parameter of the impact that determines the time-dependent reaction force when either finite element (FE) modelling or the Riera model is applied. We find that parameters that do not alter the damage potential, like elasticity of the target, are of secondary importance and if parameters are altered in a way that the damage potential remains the same then the course of the impact remains similar. We show, however, that the maximum value of the reaction force can be higher in case of elastic targets than in case of rigid targets due to the vibration of the target. The difference between the Riera and FE model results is also found to depend on the damage potential.

• 한국항공운항학회지
• /
• 제22권4호
• /
• pp.8-14
• /
• 2014

The purpose of this research was to develop evaluation conformity to operate courses based on CIPP evaluation model dedicated to approval of training organizations. In order to achieve the goal, the researchers scrutinized related documents and precedent studies, initiated the draft for evaluation conformity to operate courses and secured validity for evaluation conformity initiated through Delphi Method survey. To secure validity for evaluation conformity, the researchers conducted two Delphi Method surveys of an expert panel of 22 professionals from relevant fields including officials from the Ministry of Land, Infrastructure and Transport, researchers from Korea Transportation Safety Authority, instructors from approved training organizations and officials from industries. Through the surveys, the researchers determined 4 evaluation areas, 13 evaluation items and 52 evaluation indexes as the evaluation conformity to operate courses for aircraft maintenance mechanics. On top of that, the researchers established evaluation system in the courses for aviation professionals (aircraft maintenance mechanics), and suggested a follow-up studies regarding managing the quality of education.

• 항공우주의학회지
• /
• 제30권2호
• /
• pp.51-53
• /
• 2020

In commemoration of Vol. 30, Issue 2, our journal prepared three review articles, two original papers, and a case report. The first review analyzed aircraft accidents caused by pilots' fatigue and presented a protocol to measure their fatigue, such as primary background survey, subjective drowsiness/arousal evaluation, sleep and activity log, sleep data, and performance measurement. The second review analyzed shift work patterns and work characteristics that may affect the fatigue of aviation mechanics. Also, desirable work principles for aviation mechanics (restrictions on working hours, appropriate rest hours, and night shift restrictions) were presented. The third review discussed the effects that allergic rhinitis can have on pilots (drowsiness and decreased arousal) and introduced a safe treatment method that can prevent these adverse effects. In the first original article, the ratio of 'incompatible (non-fit)' result in aerospace medical examination among Korean aircraft pilots for the past five years was investigated by age group and the common causes of nonconformity were analyzed. In the second original article, the prevalence, mortality, prevalence according to age groups, and regional characteristics of severe febrile thrombocytopenia syndrome were compared and analyzed in Korea and Japan for the past five years. Finally, in the case report, the cases of a patient diagnosed as gastrointestinal stromal tumors who received surgical treatment and chemotherapy were discussed, and the results of the judgment were presented.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.512-521
• /
• 1997

This paper deals with an evaluation of the residual stress due to shot peening induced in a car¬burized gear tooth and its application to the fatigue crack propagation problem. The residual stress is estimated based on the assumption that the main cause of residual stress is the volume difference between the case and core due to martensitic transformation in cooling, and the influ¬ence of both the reduction of retained austenite and the strain in the surface layer induced by shot peening are considered. The reliability of the method is examined by comparison with stresses measured by the X-ray diffraction method. The stresses intensity factors are computed by the influence function method and the reduction of the factor due to the residual stress is demonstrat¬ed and discussed based on the fracture mechanics.

• 비파괴검사학회지
• /
• 제21권4호
• /
• pp.371-382
• /
• 2001

The recognition of such natural wave guides as plates, rods, hollow cylinders, multi-layer structures or simply an interface between two materials combined with an increased understanding of the physics and wave mechanics of guided wave propagation has led to a significant increase in the number of guided wave inspection applications being developed each year. Of primary attention Is the ability to inspect partially hidden structures, hard to access areas, and teated or insulated structures. An introduction to some physical consideration of guided waves followed by some sample problem descriptions in pipe, ice detection, fouling detection in the foods industry, aircraft, tar coated structures and acoustic microscopy is presented in this paper. A sample problem in Boundary Element Modeling is also presented to illustrate the move in guided wave analysis beyond detection and location analysis to quantification.