• 대한기계학회논문집B
• /
• 제32권1호
• /
• pp.7-14
• /
• 2008

It has been reported that partially premixed interacting flame could be sustained till sonic exit velocities if eight small nozzles are arranged optimally and one nozzle on the center is fed small amount of fuel. But the equivalence ratios in this experiments were 20-60. In this research, experiments were conducted to know the effects of lean-rich staging in multiple jet flames on the blowout velocity. The fuel mole tractions in the fuel-air mixture, the nozzle exit velocity and the diameter between adjacent nozzles were alternatively changed. When the lower mole fraction fuel was fed to the nozzles located near the center and small amount of fuel to the center nozzle, flame was not extinguished even at the nozzle exit velocity of 200m/s. Also the interacting flame could be sustained till that velocity when four small size nozzles for lean mixture were located within the arrangement of four nozzles for rich mixture and configured optimally.

• Radiation Oncology Journal
• /
• 제2권1호
• /
• pp.139-148
• /
• 1984

The CT findings of 46 cases of nasopharyngeal cancer were analyzed and compared with clinical tumor staging. They are composed of 28 cases $(61\%)$ of squamous cell carcinoma, 13cases $(28\%)$ of undifferentiated carcinoma, 4 cases $(9\%)$of lymphoma and 1 case $(2\%)$ of adenoid cystic carcinoma. The results were as follows : 1. The most common CT findings of nasopharyngeal cancers are air·way asymmetry including obliteration of Rosenmuller fossa, orifice of Eustachian tube and asymmetric obliteration of parapharyngeal fat. 2. Other involved anatomic sites are carotid sheath area, oropharynx, paranasal sinuses especially sphenoid sinus, cervical lymph nodes, nasal cavity and skull base or middle cranial fossa. 3. CT does significantly influence on the tumor staging of the nasopharynx cancers, but has a definite value in evaluating deep tissue invasion of the cancers especially to parapharyngeal space or carotid sheath area. 4. CT seems to be essential for staging work-up, estimating the prognosis, and assessing the effect of radiotherapy of the nasopharyngeal cancer because it clearly shows the whole extent of the tumors including deep tissue invasion.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.41-44
• /
• 2014

This study focused on the effect of the biomass blended ratio on air-staged pulverized coal furnace. The hybrid NOx reduction technology between fuel blending and air staging has been applied in an air-staged pulverized coal fired furnace. The results indicated that co-firing biomass with coal could reduce NOx emissions in an air-staged combustion. In addition, carbon burnout and flame temperature increased under the air-staged condition. A dominant synergistic effect on NOx reduction and carbon burnout was observed when biomass co-firing with coal was applied in air staged combustion.

• 한국연소학회지
• /
• 제12권4호
• /
• pp.14-21
• /
• 2007

In order to enhance combustion efficiency, oxygen-enriched combustion is used by increasing the oxygen ratio in the oxidizer. However, since the flame temperature increases, NOx formation in the furnace seriously increases for low oxygen enrichment ratio. In this case, reburning is a useful technology for reducing nitric oxide. In this research, experimental studies have been conducted to evaluate the hybrid effects of reburning/selective non-catalytic reaction (SNCR) and reburning/air staging on NOx formation and also to examine heat transfer characteristics in various oxygen-enriched LPG flames. Experiments were performed in flames stabilized by a co-flow swirl burner, which were mounted at the bottom of the furnace. Tests were conducted using LPG gas as main fuel and also as reburn fuel. The paper reported data on flue gas emissions, temperature distribution in furnace and various heat fluxes at the wall for a wide range of experimental conditions. Overall temperature in the furnace, heat fluxes to the wall and NOx generation were observed to increase by low level oxygen-enriched combustion, but due to its hybrid effects of reburning, SNCR and Air staging, NOx concentration in the exhaust have decreased considerably.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.123-125
• /
• 2012

In this study, combustion characteristics for 20t/h water tube boilers are studied. The burner by applying The fuel staging technology, the air staging technology, the partially premixed technology, the separated flame technology and the flame inner recirculation technology was designed. This study was to determine the combustion characteristics for the three types of burners. It is found that the result of flame temperature measurement is less than $1300^{\circ}C$ at the all flame region. also, emissions of NOx and CO are found to be 15.8 ppm and 18.9 ppm, respectively.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.105-112
• /
• 2002

The objective of this research is to determine generally applicable design principles for the development of internally staged combustion devices. Utilizing a triple annulus combustor, air staged commercial propane flame configuration are studied. For this triple air staged combustor, the angular momentum weighted by it's swirl number and air distribution ratio was observed to be the critical criteria. An internal recirculation zone which develops on the centerline of the flame immediately downstream of the burner entraps the fuel into a fuel rich eddy. Then sufficient heat must he transferred from the flame via radiation to the chamber heat transfer surfaces, such that when the second air is introduced, peak flame temperatures are suppressed. It is experimentally found out that the total NOx emission level in this type of burner is lower than 0.75g/kg.

• 한국연소학회지
• /
• 제20권2호
• /
• pp.40-45
• /
• 2015

This study is aimed to study combustion characteristics of low $NO_X$ burner using petroleum cokes as fuel. The petroleum coke, which is produced through the oil refining process, is an attractive fuel in terms of its high heating value and relatively low price. But petroleum coke is a challenging fuel because of its low volatile content, high sulfur and nitrogen content, which give rise to undesirable emission characteristics and low ignitability. The petroleum cokes burner is operated at fuel rich condition, and overfire air are supplied to achieve fuel lean condition. The low $NO_X$ burner is designed to control fuel and air mixing to achieve air staged combustion, in addition secondary and tertiary air are supplied through swirler. Air distribution ratio of triple staged air are optimized experimentally. The result showed that $NO_X$ concentration is lowest when overfire air is used, and the burner function at a fuel rich condition.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.153-160
• /
• 2001

The combustion test used DTF was performed to obtain the characteristics of NOx emission and reduction. In this test, major factor of NOx emission was a stoichiometric air ratio. At the onset of combustion to be rich oxygen, NOx was produced rapidly. Optimum condition for NOx reduction was formed under about AR:0.7 in the combustion test of Alaska coal. Investigations were undertaken with 200KW(th) test combustor. In combustion test, the major variables were coal feed ratio of center/outer, stoichiometric air ratio at the onset of combustion. The lowest NOx emission, 182ppm(6% O2 base), was achieved at about AR:0.6 of the first combustion stage with low NOx burner. Also, unburned carbon content of char collected in this combustion condition was about 1wt%.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.11-15
• /
• 2005

공중발사 방식은 일반적인 지상발사와 비교해 볼 때 많은 장점을 지니고 있다. 그러나 공중발사 로켓의 형상은 모선에 장착 시 많은 제한이 따르기 때문에 여러 해석분야를 통합한 시스템 설계가 필요하다. 시스템 설계는 순차적 최적화와 MDF 기법을 이용하여 수행되었다. 해석 모듈은 임무분석, 단배분, 추진해석, 형상, 중량해석, 공력해석, 궤적해석을 포함한다. 두 가지 기법 중 MDF 기법을 이용하였을 때 더 좋은 결과를 도출하였다. 시스템 최적화 결과 총 중량 1244.91 kg. 위성중량 7.5 kg, 총 길이 6.18m, 지름 0.60 m을 지닌 초음속 공중발사 로켓이 설계되었다.

• 한국항공우주학회지
• /
• 제33권12호
• /
• pp.26-32
• /
• 2005

공중발사 방식은 일반적인 지상발사와 비교해 볼 때 많은 장점을 지니고 있다. 그러나 공중발사 로켓의 형상은 모선에 장착 시 많은 제한이 따르기 때문에 여러 해석분야를 통합한 시스템 설계가 필요하다. 시스템 설계는 순차적 최적화와 MDF 기법을 이용하여 수행되었다. 해석 모듈은 임무분석, 단배분, 추진해석, 형상, 중량해석, 공력해석, 궤적해석을 포함한다. 두 가지 기법 중 MDF 기법을 이용하였을 때 더 좋은 결과를 도출하였다. 시스템 최적화 결과 총 중량 1244.91kg, 위성중량 7.5kg, 총 길이 6.36 m, 지름 0.60m을 지닌 초음속 공중발사 로켓이 설계되었다.