• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.51-60
• /
• 2005

This paper describes a robust control scheme for high-speed and long stroke scanning motion of high precision linear motor system consisting of linear motor, air bearing guide and position measurement system using heterodyne interferometer. Nowadays, semiconductor process and inspection of wafer or LCD need high speed and long travel length for their high throughput and extremely small velocity fluctuations or tracking errors. In order to satisfy these conditions, linear motor system are widely used because they have large thrust force and do not need motion conversion mechanisms such as ball screw, rack & pinion or capstan with which the system are burdened. However linear motors have a problem called force ripple. Force ripple deteriorates the tracking performances and makes periodic position errors. So, force ripple must be compensated. To maximize the tracking performance of linear motor system, we propose the control scheme which is composed of a robust control method, Time Delay Controller (TDC) and a feedforward control method, Zero Phase Error Tracking Control (ZPETC) for accurate tracking a given trajectory and an adaptive force ripple compensation (AFC) algorithm fur estimating and compensating force ripple. The adaptive ripple compensation is continuously refined on the basis of tracking error. Computer simulation results based on modeled parameters verify the effectiveness of the proposed control scheme for high-speed, long stroke and high precision scanning motion and show that the proposed control scheme can achieve a sup error tracking performance in comparison to conventional TDC control.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.53-68
• /
• 1990

This research has been executed for maximization of lumber yield and more efficient use of small diameter logs. Sample logs from thinnings carne from densed artificial stands at the Kwangnung Experimental Forests situated in the central region of Korean peninsula. Species of sample logs were obtained to execute sawing and strength test for larch, and lumber strength test in full size for pitch pine and Korean pine. A survey on sawmills consuming domestic logs was carried out to know sawmill production, costs and utilization structure of lumber as a guide to business analysis. Results showed that sawing pattern from small logs less than 15cm in diameter was necessary to cut 9cm by 9cm square per one log in order to obtain high lumber recovery and provide for wide market needs. The total lumber yield of squares plus side boards was 56 percent to 58 percent from small logs and the yield for log sweep in 30 percent decreased by 24.5 percent in sawing production, compared to yield for straight logs. In sawing efficiency, production of lumber by twin band saw could be improved 238 percent higher than lumber of the same species produced by conventional sawmilling methods, and sawing accuracy with twin band saw was much higher at the lumber production than band saw. Lumber from the small larch logs has shown 70 knots per $m^2$ on its faces and also lumber showed lots of face checkings by air drying on the yard, compared to other species. MOR in bending of lumber in full size from small logs of larch was found ranging from 380kg/$cm^2$ to 460kg/$cm^2$, resulting in 40 percent less than the strength from clear small specimens. In lumber containing knots, cross grain, etc, longitudinal stress wave speed was delayed about 48 percent by defects in lumber from both larch and pitch pine logs. The surveyed sample sawmills consumed the domestic logs at the rate of 54 percent to 84 percent in the total timber consumption, showing high consumption at mills located in the mountains.

• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.59-66
• /
• 2015

The undesirable effects of elevated external temperatures at placement on the properties of the fresh and hardened concrete are discussed briefly, and the possible use of the mineral admixtures to mitigate them and the association with water-reducing and retarding admixtures in terms of the mix design which are critical for minimizing slump loss and entrained air loss are examined in this study. To investigate the effects of such the mineral and chemical admixtures on the fresh and hardened properties of concrete exposed to high temperature, a series of concrete mixtures subjected to the high temperature were carried out and then fresh and hardened properties of the mixtures were analyzed and evaluated. Based on the results, new guide lines concerning the appropriate admixtures for hot weather are suggested.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.9-15
• /
• 2020

Jilin province has a rich variety of agricultural and sideline products. The circulation of agricultural products needs the support of cold chain logistics. The development of cold chain logistics in Jilin province is lagging behind, which leads to waste of agricultural products and decrease of farmers' income. As a result, this article from the perspective of cold chain logistics development, extracted the influence factors of fresh agricultural products cold chain logistics development in Jilin province, using the analytic hierarchy process (AHP) on the degree of restriction factors, weight analysis found that agricultural products cold chain logistics costs, information technology application and market-based degree of cold chain logistics is the three main factors for the development of Jilin province agricultural cold chain logistics, and puts forward the development plan, in order to guide the development direction of Jilin agricultural cold chain logistics.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.5
• /
• pp.43-50
• /
• 2002

To improve the current waveform of diode rectifiers, we propose a new operating principle for the voltage -doubler diode rectifiers. In the conventional voltage-doubler rectifier circuit, relatively large capacitors are used to boost the output voltage, while the proposed circuit uses smaller ones and a small reactor not to boost the output voltage but improve the input current waveform. A high input power factor of 97[%] and an efficiency of 98[%] are also obtained. The harmonic guide lines of proposed rectifier is no interfered with inverter switching, resulting in a simple, reliable and low-cost ac-to dc converters in comparison with the boost-type current-improving circuits.It compared conventional pulse-widthmodulated(PWM)inverter with half pulse-widthmodulated (HPWM) inverter. Proposed HPWM inverter eliminated dead-time by lowering switchingloss and holding over-shooting.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.30-34
• /
• 2013

Prevention of exhaust gas back flow becomes a great interest to shipyards and shipowners in large container carriers because exhaust gas pollutes cargoes, flows back into the deck house and the engine room area through fresh air intakes and fan rooms, gives harmful damages to the crew's health and also gives thermal damages to electric equipments on the navigation deck. The phenomena of exhaust gas back flow has been studied with the analysis of sea trial records and wind tunnel tests and the height of the exhaust gas pipe, the front area of the deck house, the inflow speed and the position of the radar mast platform has been confirmed as the principal factors of exhaust gas back flow phenomena. The simple empirical formula to estimate exhaust gas back flow phenomena and the design guidances of exhaust gas related structures on deck has been introduced. In future, parametric studies for the exhaust gas back flow factors will be carried out with the CFD analysis. The results of this study will be the guide for development of the prevention method of exhaust gas back flow phenomena for large container carriers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.10
• /
• pp.857-864
• /
• 2016

Many plane, UAV and drone fly in the sky as development of aviation industry. Plane and UAV fly and drone's propellers rotate so fast. Impact between flying objects which have high velocity threats passengers. Also the impact damages people, building and various property. Plane's operating speed is near sound velocity(340m/s), and propeller's rotating speed is less than that. Until now, impact experiment uses gas gun to get speed and the gun needs large space to entirely air expansion. Electromagnetic launcher, especially railgun, needs smaller space than gas gun to get enough speed about 500m/s. This paper explains electromagnetic launcher's operating principle, shows making electromagnetic launcher design guide line and suggests that it is a better apparatus to get low-high velocity.

• CELLMED
• /
• v.10 no.3
• /
• pp.25.1-25.7
• /
• 2020

Allergic Rhinitis (AR) is an IgE (immunoglobin-E) mediated inflammatory condition of upper respiratory tract; main clinical features involve runny nose, sneezing, nasal obstruction, itching and watery eyes. AR is a global problem and has large variations in incidences, currently affects up to 20% - 40% of the population worldwide. It may not be a life-threatening disease per se but indisposition from the condition can be severe and has the potential to adversely affect the daily functioning of life. Classical yoga literature indicates that, components of yoga have been used to treat numerous inflammatory conditions including upper respiratory tract. A few yoga intervention studies reported improvement in lung capacity, Nasal air flow and symptoms of allergic rhinitis. This review examined various anti-inflammatory pathways mediated through Yoga that include downregulation of pro-inflammatory cytokines and upregulation of anti-inflammatory cytokines. The hypothalaminic-pitutary-adrenal (HPA) axis and vagal efferent stimulation has been reported to mediate anti-inflammatory effect. A significant reduction is also reported in other inflammatory biomarkers like- TNF-alpha, nuclear factor kappa B (NF-κB), plasma CRP and Cortisol level. Neti, a yogic nasal cleansing technique, reported beneficial effect on AR by direct physical cleansing of thick mucus, allergens, and inflammatory mediator from nasal mucosa resulting in improved ciliary beat frequency. We do not find any study showing effect of yoga on neurogenic inflammation. In summary, Integrated Yoga Therapy may have beneficial effect in reducing symptoms and improving quality of life for patients with allergic rhinitis. Yoga may reduce inflammation through mediating neuro-endocrino-immunological network. Future studies are needed to explore the mechanism how yoga might modulate immune inflammation cascade and neurogenic inflammation at the cellular level in relevance to allergic rhinitis; the effects of kriyas (yogic cleansing techniques) also need to be evaluated in early and late phase of AR. So the proposed model could guide future research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.750-759
• /
• 2015

This paper focuses on reverse simulation methods to find and analyze the required performance of a defense system under a given combat effectiveness. Our approach is motivated that forward simulation, that traditionally employs the effectiveness analysis of performance alternatives, is not suitable for resolving the above issue because it causes a high computational cost due to repeating simulations of all possible alternatives. To this end, the paper proposes a reverse simulation software architecture, which consists of several functional sub-modules that facilitate two types of reverse simulations according to possibility of inverse model design. The proposed architecture also enable to apply various search algorithms to find required operational capability efficiently. With this architecture, we performed two case studies about underwater and anti-air warfare scenarios. The case studies show that the proposed reverse simulation incurs a smaller computational cost, while finding the same level of performance alternatives compared with traditional forward simulation. Finally we expect that this study provides a guide those who desire to make decisions about new defense systems development.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.3
• /
• pp.59-67
• /
• 2007

For the time being, HMA test specimen were prepared by Marshall Compaction Method for hot mix asphalt design and evaluated the mechanical properties of HMA at the specified air voids. Gyratory Compaction can simulate the field compaction process and measure the degree of compaction just after field compaction in laboratory. Superpave mix design with Gyratory compactor has been used for characterization of performance. The curve of gyratory compaction can be used to evaluate the permanent deformation potential of hot mix asphalt. In this paper, couple of indices for hot mix asphalt have been showed for hot mix asphalt in Korea. The major properties from gyratory compaction curve are compaction energy index and traffic compaction index. The specific guide line for the potential of hot mix asphalt has been proposed.