• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.14 no.2
• /
• pp.57-63
• /
• 2008

The effects of airtight containers and zipper bags on the freshness extension of pine nuts (Pinus koraiensis) were studied at 4 and $25^{\circ}C$. Changes in total microbial growth, 2-thiobarbituric acid(TBA), color, and sensory quality were evaluated during storage. Total bacterial counts of the samples continuously increased over 28 days for airtight containers and 56 days for zipper bags, and then decreased at 70 days because the lack of air could affect the inhibition of the aerobic microbial growth. However no significant differences were observed between airtight containers and zipper bags. TBA values continuously increased with storage time, but there were no significant differences between the airtight containers and zipper bags during storage. Color changes and sensory evaluation analyses showed that the data revealed similar results for both packaging systems over the storage time. Therefore, it has been concluded that airtight containers and zipper bags could be used as a good packaging system to extend the shelf life of pine nuts by controlling the microbial growth, but the packaging systems of the airtight containers and the zipper bags was not significantly affect the quality parameters for 2-thiobarbituric acid(TBA), color, and sensory quality.

• Journal of Food Hygiene and Safety
• /
• v.3 no.4
• /
• pp.217-223
• /
• 1988

For the Effective utilization of the fish resources in coastal regions, investigations on preparation of powdered dried arkshell instant soup., quality stability of the products during storage and utilization as a food material were carried out with arkshell, Anadara broughtonii. Three kinds of powdered instant soup were prespared as 0% table salt(A), 5% table salt (B), 15% table salt(C) and packed with vacuum in laminated film bag. (polyester/nylon: 85${mu}ell$/15${mu}ell$, 18$\times$27cm) Their processing conditions and quality stability during storage at room temperature for 90 days were examined. Powdered instant soup was made by washing raw arkshell to remove visceral, clay, sand and blood, hot air drying(60$\pm$1$^{\circ}C$, 20 hrs) after draining and pulverizing dried arkshell to 35 mesh. Powdered instant soup was made by adding 2% sugar 0% table salt (5% and 15% table salt), 10.5% monosodium glutamate, 0.3% black pepper and 0.3% garlic powder to the pulverized dried arkshell. The condition of moisture and water activity of the products were 5.9-6.9% and 0.42-0.43, respectively. The moisture content s , water activity and pH of the products were showed little change and volatile basic nitrogen of them increased slightly during storage. Thiobarbituric acid value increased up to 60 days of storage and then decreased slightly. In solubility, powdered instant soup were showed no remarkable difference comparing with goods on the market. The color value of th products were showed little change during storage, In sensory evaluation, product B were scored slightly higher, in most cased, in flaver, color. taste and overall acceptability comparing with product A or product C during storage. Judiging form the sensory evaluation, powdered instant soup of 5% table salt (B) were the most desirable, and the quality of the products was stable for 90 days at 20$\pm$3$^{\circ}C$.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.6
• /
• pp.1409-1411
• /
• 2003

The indirect carbonization without solvent for the extraction of the natural undiluted solution has been studied. The following results have been obtained. 1. The traditional wood undiluted solution distillation can be embodied with the indirect carbonization without solvent of the airtight space. The system of the indirect carbonization without solvent is the indirect dry distillation apparatus. It is composed of the high-temperature stove, the exterior can, material bag, interior can, collect water can and air-fan.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.813-816
• /
• 2009

A commercial-scale RDF boiler that its burning capacity is 400 kg-RDF/hr and steam production capacity is 2 ton/hr. It has a chain type stoker and waste heat recovery system. Heat exchanger is vertical water-pipe so that soot blowing and removal is convenient during operation. Dry scrubber, bag filter and activated carbon tower have been installed for the reduction of air pollutant gases and dust. Analysing data of pollutants from stack such as $SO_x$. $NO_x$ and dioxin shows so good results that the boiler system could comply the regulated emission limits.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.259-266
• /
• 2000

Crash test data from different impact modes and threshold speeds were used to assess the effects of impact conditions on air bag electronic single point sensing (ESPS) activation requirements. The requirements are expressed in terms of the desired sensor activation time based on unbelted driver dummy kinematics. A crash discriminator pre-displacement is introduced to crash recognition algorithm to the ESPS. The new crash recognition algorithm named Velocity Energy Pre-displacement(VEPD) method is developed and the ESPS algorithm based on the VEPD technique is used to assess the ESPS system performance. It is shown that VEPD method correlates very well with desired sensor activation time and meets the activation requirement.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.12-19
• /
• 2011

Real-world accident cases were investigated to understand injury characteristics of the elderly driver. A total 10 cases of car-to-car frontal crash accidents from passenger car including SUV claimed to domestic car insurance company were reviewed. The injury characteristics of the elderly were analyzed from personal information (gender, age), medical treatment record (medical certificate, curative days), vehicle information (model, air-bag, seatbelt) and damage information. This study showed that elderly driver has higher possibility of thorax injury than non-elderly's. Moreover, Injury type and severity were more severe than non-elderly driver at similar type accident conditions. Also, elderly driver's medical treatment period needs 3 times more than non-elderly driver's.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.835-838
• /
• 2010

자동차 승객 안전에 대한 요구가 점차 확대 되어감에 따라 전방 충격으로부터 승객의 상해를 감소시키기 위한 각종 승객 안전장치 중 하나로, 에어백 시스템은 정면충돌 시 승객 사망률을 약 30%정도 저감시킬수 있다. 에어백은 충돌 시 일정한 힘 이상을 받게 되면 작동하도록 설계하여야 한다. 본 논문은 CATIA를 이용하여 3차원 설계를 하였으며, 해석 프로그램을 이용하여 사출성형품의 구조해석 및 사출 해석을 하여 최적화 하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.82-87
• /
• 2012

Research and development of the spinning system which become bigger, faster and more detailed has been making progress continuously due to the increasing use of yarn which is considered as raw material to make industrial goods such as tire cord, air bag, filter, seatbelt and fiber-optic cable along with a remarkable growth of industry. In this paper, the desirable procedure and design requirements concerning a method of vibration reduction for "Godet Roller" considered as the main source of high vibration in the spinning system were suggested, and then verified those by analysis and actual test.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.786-794
• /
• 1998

This paper proposes an automatic microshaping technology using laser and applies it to implementation of semicutting control system of the panel inside which a car air bag is equipped. Since it is impossible to project laser directly onto the desired working point of a target panel due to fixedness of laser generator, we reflect the generated laser, using reflection mirrors and focusing lenses, to project onto the desired working point. Also, in order to conduct an uniform semicutting control with constant width and depth, we control the end-effector of manipulator, which grasp the laser reflection mirror, to track working path with constant speed and orientation. The validity and effectiveness of the proposed methods are checked through experiments tracking a path formatted with straight lines and arcs.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.263-264
• /
• 2000

여과포 표면상에 도달하는 입자의 농토를 낮추거나 균일하게 유지시킬 경우, 부착된 입자층 두께의 성장으로 인한 압력손실의 증가율을 줄일 수 있고 이로 인하여 탈진 주기 또한 감소시킬 수 있다. 탈진조작의 저감으로 인하여 여과포의 수명 증대로 여과포의 교체 시기를 연장시킬 수 있으므로 여과포 집진장치의 운전 및 유지 보수비의 저감을 이룰 수 있다. 본 연구에서는 집진용기의 중간부분에 위치한 접선 유입관을 통하여 오염입자를 함유한 기체유동을 유입시킨 후, 원심력과 난류확산에 의하여 집진용기 내벽과 내통(inner tube) 벽면에 부착된 입자는 중력에 의하여 용기 바닥으로 모인 후 바닥면에 설치된 스크래퍼(scraper)를 통하여 분리 처리될 수 있는 새로운 형상의 집진장치를 개발하고자 하였다. (중략)