• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2011

Controlling industrial vehicle operated by human in warehouse was not simple since the information transfer for controlling the vehicle was not easy. However, as the technology for the WMS (Warehouse Management System) has been advanced and the PDA (Personal Digital Assistant) has come into wide use in a workplace, the control of man-operated vehicle became less difficult as do to AGVS (Automated Guided Vehicle System). This study examines the ways to improve the efficiency of warehouse operation through introducing rule of task assignment for the vehicles, particularly forklift. This study, basically, refer to AGV operation policy because a great number of studies for AGV dispatching rule have been done and the mechanism for the controlling vehicles is very similar. The workers in field prefer to simple dispatching rules such as Shortest Retrieval Time First (SRTF), Shortest Travel Time First (STTF), and Longest Waiting Time First (LWTF). However, these rules have potential disadvantage. Thus, several rules made up by combining rules mentioned above are introduced and these new rules use threshold value or evaluation formula. The effectiveness of these new rules are tested by simulation and the results are compared. This study proposes favorable dispatching rules for forklift in warehouse for the efficiency of the vehicle operation and stability of service level.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.826-831
• /
• 2004

Recently, studies have been carried out to develop unmanned Micro Air Vehicles(MAVs) that can search and monitor inside buildings during urban warfare or rescue operations in hazardous environments. However, existing fixed-wing and rotary-wing MAVs cannot travel at extremely low or high speeds, hover in place, or change directions instantly. This has lead researches to search for other flight methods that could overcome those drawbacks. Insect flight principles and its applications to MAVs are being studied as an alternative flight method. To take flight, insects flap and rotate their wings. These wing motions allow for high maneuverability flight such as hovering, vertical take off and landing, and quick acceleration and deceleration. This paper proposes a method for designing a mechanism that reproduces hovering insect flight, the basis for all other forms of insect flight. The design of a mechanism that can reproduce the motion that causes maximum lift is proposed, the required specifications are calculated, and a method for reproducing hovering insect flight with a single motor is presented. Also, feasibility of the design was confirmed by simulation.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.1
• /
• pp.97-101
• /
• 2014

With the increase in global air travel, aircraft noise has become a major public issue. In modern aircraft engines, only a small proportion of the air that passes through the whole engine actually goes through the core of the engine, the rest passes around it down the bypass duct. A successful method of reducing noise further, even in ultra-high bypass ratio engines, is to absorb the sound created within the engine. Acoustically absorbent material or acoustic liners have desirable acoustic attenuation properties and thus are commonly used to reduce noise in jet engines. The liners typically are placed upstream and downstream of the rotors (fans) to absorb sound before it propagates out of the inlet and exhaust ducts. Noise attenuation can be dramatically improved by increasing the area over which a noise reducing material is applied and by placing the material closer to the noise source. In this paper we will briefly discuss acoustic liner applications in modern turbofan engines.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.2
• /
• pp.89-97
• /
• 2015

The volume of transfer passengers now faces a crisis because the number of Chinese and Japanese passengers, the majority of transfer through Korea, is decreasing. This paper is analyzing the their air travel behaviors as well as characteristics of their transfer behaviors at airport. According to the research, it is suggested that transfer passengers perceive the importance of duty-free stores but their satisfaction of using duty-free stores during their transfer at Icheon airport was proven to be low. Considering the characteristics of transfer service quality at Incheon airport, waiting time of transfer is important but not satisfactory for them. Moreover, information of free transfer tour to city downtown and paid-in transfer tour for medical tourism is not known very well among North East Asian passengers. Thus, it is necessary to do detailed research of North East Asian transfer passengers, who have transferred through Incheon airport more than twice a year, to find out their exact needs of transfer tour in Korea.

• Journal of Korean Society on Water Environment
• /
• v.25 no.4
• /
• pp.547-552
• /
• 2009

Because of refractory property of light, the travel path of UV light becomes longer than the straight line and shorter solely in water as UV light passes sequentially through air, quartz and water. Note that water significantly absorbs UV light. Hence, UV intensity shall be estimated to be lower when refraction is neglected than it is considered. Reflection is also critical for the design of UV radiation system. While the reflection at the interface of air and quartz is low enough to ignore, it is too high to be ignored at the interface of quartz and water. Assuming constant power, smaller length to width ratio of UV reactor is beneficial and single-lamp system is preferred to multi-lamps. Under the given cross section, optimal lamp positions could be decided. For example of an elliptical reactor with dual lamps, the optimal lamp locations shall be the 1/3 and 2/3 position of the longer axis.

• Korean journal of aerospace and environmental medicine
• /
• v.31 no.3
• /
• pp.64-67
• /
• 2021

When the COVID-19 crisis hit air transport, the whole aviation industry was affected. The change in the behavior of passengers following the COVID-19 crisis, travel restrictions and the ensuing economic crisis have resulted in a dramatic drop in demand for airline services. The COVID-19 pandemic, with all its associated consequences, has had a significant impact on the mental health and well-being of pilots, which could impact operational safety. As the number of international flights has decreased, pilots are exposed to high levels of psychological stress such as job instability, reduced income and increased risk of infection during flight work. Psychological stress lowers work performance and threatens aviation safety. The pilot needs mental health management during the COVID-19 pandemic, but psychological support is weak. For pilot mental health management, it is important to raise awareness about mental health and to continuously respond. To this end, it is necessary to foster a safe and trustworthy culture in which mental health issues are discussed freely and solved together without hiding them. They should also support the establishment of a peer support program that is easily accessible and that allows pilots to discuss their issues with confidence.

• Journal of the Korea Society for Simulation
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2016

This study focuses on the air to air missile control fin planform optimization for the minimizing hinge moment with the considering phenomena of fluid and structure simultaneously. The fluid-structure interaction method is applied for the fluid and structure phenomena simulation of the control fins. A transient-loosely coupled method is used for the fluid-structure interaction simulation because it is suited for using each fluid and structure dedicated simulation software. Searching global optimization point is required many re-calculation therefore in this study, a mathematical model is applied for rapidly calculation. The face centered central composite method is used for generating design points and the 2nd polynomial response surface is sued for generating mathematical model. Global optimization is performed by using the generic algorithm. An objective function is the minimizing travel distance of the center of pressure between Mach 0.7 and 2.0 condition. Finally, the objective function of optimized planform is reduced 7.5% than the baseline planform with satisfying constrained conditions.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.2
• /
• pp.47-58
• /
• 2016

The cabin service quality expected by customers during the air travel can be the top priority to choose an airline. Customers' perception about cabin service quality evaluation are important for developing differentiated cabin service strategies of airlines, so this study aims to analyze the effect of the cabin service quality on airline image and customer loyalty. For achieving this purpose, literature study and empirical study on cabin service, customer loyalty and airline image were performed together. As a results of research, a high level of the cabin service quality provided by airlines significantly influenced positive images of airlines and customer loyalty. And customers' positive image towards airlines practically had a substantial influence on the improvement of customer loyalty. These study results would help in creating positive images of airlines and securing customer loyalty by developing differentiated and improved cabin service quality strategies of each airline in the limitless competition of the aviation service industry.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.2
• /
• pp.41-61
• /
• 2005

The concept of revenue management (RM) has been used widely in the air-transportation industry, and proven as a good system for managing perishable assets. While the airlines are the oldest and most sophisticated users of RM, these practices have been an enormously important innovation in other service industries such as the travel, the railway, the internet and the manufacturing industries. In this paper, reviewing several studies on RM, we introduce the fundamental concepts and the major models of RM covering seat allocation with multiple fare classes and overbooking. Future research directions also are suggested.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.3
• /
• pp.111-119
• /
• 2003

The concept of revenue management have been used mainly in the service-industries like hotel and air transportation which handles perishable asset. Recently however, it is being increasingly applied to many other areas including travel, railway and medicine. This paper tries to introduce the concept into the internet business. Revenue management used in the service industry is a good system for the management of perishable asset. Internet business can be classified as various industries according to the characteristics of the individual companies. Contents providers and internet service providers are very similar to service industry, and revenue management system is suitable to them. This paper develops the ways to apply the revenue management concept to ISP business.