1 |
Mofid Gorji-Bandpy, and Mohammadreza Azimi, "Technologies for jet noise reduction in turbofan engines", Aviation, Vol. 16, Isuue 1, 2012, pp. 25-32.
DOI
|
2 |
Mohammadreza Azimi and Fathollah Ommi, "Using Microjets as an Efficient Technique for Jet Noise Reductionin High-Bypass Turbofan Engines", Journal of Mechanical Engineering and Technology, Vol. 2, No. 1, pp. 49-53.
|
3 |
K. D. Kryter. The handbook of hearing and the effects of noise: physiology, psychology, and public health. Emerald Group Publishing Limited; first edition, 1994.
|
4 |
D. G. Crighton, "Airframe Noise", Aeroacoustics of Flight Vehicles: Theory and Practice, NASA RP-1258, edited by H. H. Hubbard, Vol. 1, 1991, pp. 391-447.
|
5 |
Smith, M. J. T., "Aircraft Noise", 1st ed., Cambridge University Press, Cambridge, England, UK, 1989, pp. 120- 134.
|
6 |
Narkiewicz, J. and Pietrucha, J., "Reduction of helicopter vibration and noise level by active control technology", Aviation. Scientific Works, Vol. 3, 1998, pp. 83-85.
|
7 |
Ziliene, D. and Stankunas, J., "Analysis of influence of aircraft noise limitations following requirements of European Union on sector of Lithuania air transport services", Aviation, Vol. 6, issue. 1, pp. 34-40
|
8 |
Vanker, S., Enneveer, M. and Rammul, I., "Noise assessment and mitigation schemes for Estonian airports",Aviation, Vol. 13, No.1, 2009, pp. 17-25
DOI
|
9 |
Trefney, C.J. and Wasserbauer, J.W., "Low-speed Performance of an Axisymmetric, Mixed- Compression,Supersonic Inlet With Auxiliary Inlets", NASA TP-2557, 1986.
|
10 |
Tyler, J. M., and sofrin, T.G., Axial Compressor Noise Studies, SAE Transactions, Vol.70, 1962.
|
11 |
Morin, B. L., "Broadband Fan Noise Prediction System for Turbofan Engines", NASA/CR-2010- 216898, Vol. 1, 2010.
|
12 |
Hanson, D.B., "Theory for Broadband Noise of Rotor and Stator Cascades With Inhomogeneous Inflow Turbulence Including Effects of Lean and Sweep", NASA/CR- 2001-210762, May 2001.
|
13 |
Astley, R. J., Sugimoto, R. and Mustafi, P., "Computational aero-acoustics for fan duct propagation and radiation. Current status and application to turbofan liner optimization", Journal of Sound and Vibration, Vol. 330, pp. 3832-3845.
|
14 |
Huff, D. L., "Noise Reduction Technologies for Turbofan Engines", NASA/TM-2007-214495, 2007.
|
15 |
Mofid Gorji-Bandpy, and Mohammadreza Azimi, "Airframe Noise Sources and Reduction Technologies in Aircraft", Noise and Vibration Worldwide, Vol. 43, No. 9, 2012, pp. 29-36.
|
16 |
Rayleigh, L., "The Theory of the Helmholtz Resonator", In Proceedings of the Royal Society of London, Vol. 92, No. 638, 1916.
|
17 |
Helmholtz, H.v., On the Sensations of Tone. 1954, New York: Dover.
|
18 |
Dean, P.D., "On the "In-Situ" Control of Acoustic Liner Attenuation",. Journal of Engineering for Power, Vol. 99, No. 1, 1976, pp. 63-70.
|
19 |
M. G. Jones, T.L.P. and W. R. Watson, Comparison of Acoustic Impedance Eduction Techniques for Locally- Reacting Liners, In 9th AIAA/CEAS Aeroacoustic Conference and Exhibit, Hilton Head, SC, 2003, pp. 11.
|
20 |
Jeff D. Eldredge, and A.P.D., "The Absorption of Axial Acoustic Waves by a Perforated Liner with Bias Flow", Journal of Fluid Mechanics, Vol. 485, 2003, pp. 307-335.
DOI
|
21 |
Mcalpine, A. and Wrigh, M.C.M., "Acoustic scattering by a spliced turbofan inlet duct liner at supersonic fan speeds", Journal of Sound and Vibration, Vol. 292, pp. 911- 934.
|
22 |
Watson, W.R., Circumferentially Segmented Duct Liners Optimized for Axisymmetric and Standing-Wave Sources, NASA, Editor. 1982: Hampton, Virginia. pp. 51.
|
23 |
Lansingm D.L. and Zorumski, W.E., "Effects of wall admittance changes on duct transmission and radiation of sound", Journal of Sound and Vibration, Vol. 27, 1973, pp. 85- 100.
DOI
|
24 |
Unruh, J.F., "Finite Length tunning for low-frequency lining design, Journal of Sound and Vibration", Vol. 45, No. 1, 1976, pp. 5-14.
DOI
|
25 |
Baumeister, K.J., "Evaluation of optimized multi sectioned acoustic liners", AIAA Journal, Vol. 17, No. 11, 1979, pp. 1185-1192.
DOI
|
26 |
Tsai, M.S., "Mode scatterer design for fan noise suppression in two-dimensional ducts", Journal of Sound and Vibration, Vol. 83, No. 4, 1982, pp. 501-512.
DOI
|
27 |
Watson, W., "Noise suppression characteristics of peripherally segmented duct liners", NASA TP-1904, 1981.
|
28 |
Fuller, C.R., "Propagation and radiation of sound from flanged circular ducts with circumferentially varying wall admittances, I: semi infinite ducts", Journal of Sound and Vibration, Vol. 93, No. 3, 1984, pp. 321-340.
DOI
|
29 |
Fuller, C.R., "Propagation and radiation of sound from flanged circular ducts with circumferentially varying wall admittances, II: finite ducts", Journal of Sound and Vibration, Vol. 93, No. 3, 1984, pp. 341-351.
DOI
|
30 |
Mcalpine, A. and Fisher, M. J., "On the prediction of "buzz-saw" noise in acoustically lined aero-engine inlet ducts", Journal of Sound and Vibration, Vol. 265, No. 1, 2002, pp. 175-200.
|
31 |
Mcalpine, A., Fisher, M. J. and Tester, B. J., "Buzzsaw" noise: A comparison of modal measurements with an improved prediction method", Journal of Sound and Vibration, Vol. 306, 2007, pp. 419-436.
DOI
|
32 |
Sutliff, D.L. and Jones, M.G., "Foam-Metal Liner Attenuation of Low-Speed Fan Noise", AIAA, pp. 2008-2897.
|
33 |
Sutliff, D. L., Elliott, D. M.; Jones, M. G. and Hartley T. C., "Attenuation of FJ44 Turbofan Engine Noise With a Foam- Metal Liner Installed Over-the-Rotor", NASA Glenn Research Center, Cleveland, OH, NASA/TM-2009- 215666, 2009.
|