• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.135-141
• /
• 2006

In order to prevent traffic accident, it is very important that the driver regulates the location of rear view mirror using the automatic seat regulation system which guarantees the maximum vision of the possibility for accuracy. In order to solve this problem the paper deals with the automatic seat control system which guarantees comfortable and safe seating and good visual field. Also a automatic car seat control algorithm has been developed to regulate the back mirror. Particularly, the automatic seat control algorithm function for the air bag operation in case of an accident has been added depending on passengers weight. Moreover when the driver passes a dangerous area an algorithm has been developed which gives the driver a naming sign and has been simulated in a ubiquitous environment. The simulation result proved that the Intelligence analysis for traffic accidents can reduce franc accidents more than 25% than the currently existing methods.

• Journal of Environmental Impact Assessment
• /
• v.14 no.3
• /
• pp.117-126
• /
• 2005

This study was executed to know the best matrix of photochemical ozone reduction in the metropolitan area. For this object, we used the OZIPR(Ozone Isopleth Plotting Package for Research) model for comparing the effectiveness of VOCs and NOx amount variation about the ozone creation. Among the various ozone reduction scenarios, 50% reduction of VOCs from organic solvent and road traffic respectively was the best matrix for ozone reduction. Although it needs more accurate assessment and confirmation of VOCs and NOx emission amount data, according to existing data, the control of VOCs is the best way for photochemical ozone reduction in Seoul.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.1
• /
• pp.74-81
• /
• 2021

UAM(Urban Air Mobility) systems have evolved in the form of helicopters in the 1960~1970s, tiltrotors in the 1980s, small aircraft transportation systems in the 2000s, and electric-powered Vertical Take-Off and Landing (eVTOL) in the 2010s; accordingly, the early heliport has evolved to its current form of a Vertiport. Vertical Takeoff and Landing Sites, Vertiports, are important factors for the successful introduction of UAM, along with the resolution of air traffic control (ATC), air security, and noise problems. However, there are no domestic or international installation standards and guidelines yet. Therefore, in this study, installation standards were prepared by referring to domestic and international case studies, ICAO standards, and MIT research papers. The study proposes to establish standards for Final Approach and Takeoff Area (FATO) as 1.5D, 1D for Touchdown and Lift-Off Area (TLOF), and 1.5D for Safety Area (SA). It also proposes to add "UAM Vertiport Installation Standards" to the 「Act on the Promotion and Foundation of Drone Utilization, Drone Act」.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.4
• /
• pp.7-18
• /
• 2023

The continuous increase in air traffic emphasizes the importance of capacity calculation. Research on the calculation method of Terminal Control Area (TMA) capacity has been treated as a partial aspect of the airspace sector capacity or has been limitedly studied. This study aims to propose a mathematical model for calculating TMA capacity, taking into account the Standard Terminal Arrival Route (STAR), separation standards, TMA entry speed, and runway threshold passing speed. The proposed model has the advantage of being able to calculate the instantaneous arrival capacity, which has not been noted in previous studies, along with the throughput. Additionally, it is meaningful as the model can easily calculate the arrival capacity of the TMA considering airport construction, runway expansion, or new procedures.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2014

The base of leisure air activities are consistently expanding and its demand is expected to increase attributed to GDP growth and people's interest in its activity. Utilizing Visual Flight Rule, light sport aircrafts and ultra-light aircrafts are not under the effect of air traffic control center, which resulted in passenger injury due to emergency landing for adverse weather conditions and technical issues after pulling into mountain area, ocean and even urban area. Such events encouraged safety consciousness toward leisure aircraft activities and developing a measure to prevent a recurrence of the accident. This research focuses on suggesting compositive system for preventive safety management system by providing user based Flight information service and operating effective system, necessary for leisure aircraft activities.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.946-952
• /
• 2011

In term of inaccuracy of information and increasing channel occupancy time, the use of voice communication in Air Traffic Control has many problems. In order to improve it, ICAO proposed digital communication and ADS-B system that is more effective for voice communication in ATC. For improvement of effectiveness to add additional parameter to designated ADS-B In-Out data group, many studies being performed. In this paper, we analysis voice communication for reduce the communication traffic in ATC and simulate to add aiming altitude parameter for comparative effect analysis of communication traffic between pilot and controller. The result of the analysis were successfully validated that reduction of communication traffic in ADS-B environments.

• Journal of Communications and Networks
• /
• v.17 no.1
• /
• pp.58-66
• /
• 2015

Aeronautical communication networks (ACN) is an emerging concept in which aeronautical stations (AS) are considered as a part of multi-tier network for the future wireless communication system. An AS could be a commercial plane, helicopter, or any other low orbit station, i.e., Unmanned air vehicle, high altitude platform. The goal of ACN is to provide high throughput and cost effective communication network for aeronautical applications (i.e., Air traffic control (ATC), air traffic management (ATM) communications, and commercial in-flight Internet activities), and terrestrial networks by using aeronautical platforms as a backbone. In this paper, we investigate the issues about connectivity, throughput, and delay in ACN. First, topology of ACN is presented as a simple mobile ad hoc network and connectivity analysis is provided. Then, by using information obtained from connectivity analysis, we investigate two communication models, i.e., single-hop and two-hop, in which each source AS is communicating with its destination AS with or without the help of intermediate relay AS, respectively. In our throughput analysis, we use the method of finding the maximum number of concurrent successful transmissions to derive ACN throughput upper bounds for the two communication models. We conclude that the two-hop model achieves greater throughput scaling than the single-hop model for ACN and multi-hop models cannot achieve better throughput scaling than two-hop model. Furthermore, since delay issue is more salient in two-hop communication, we characterize the delay performance and derive the closed-form average end-to-end delay for the two-hop model. Finally, computer simulations are performed and it is shown that ACN is robust in terms of throughput and delay performances.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.109-115
• /
• 2024

The Concept of Operations (ConOps) document issued by the Korean Government (K-UAM ConOps) for urban air mobility (UAM) services takes into account not only aviation voice communication but also the use of 4G and 5G mobile communication to support the initial phase of UAM services. This paper studies a methodology to establish communication performance requirements for UAM traffic management and presents the analyzed results for communication performance requirements. To accomplish this, the operational scenarios of UAM developmental stages outlined in the K-UAM ConOps and FAA ConOps are scrutinized, and the diverse messages that must be communicated among various stakeholders for effective UAM operations are identified. A draft of communication performance requirements is also calculated by considering packet sizes, transmission frequencies, acceptable latencies, and availability. The outcomes of this study are expected to stand as a pioneering effort in defining communication requirements for UAM services, providing a crucial foundation for future initiatives such as the design of dedicated communication networks for UAM and the determination of required frequency bandwidth.

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.3
• /
• pp.74-82
• /
• 2003

Under the assumption that the temperature of one location is closely related to land use characteristics around that location, this study is carried out to assess the impact of urban land use patterns on air temperature. In order to investigate the relationship, GIS techniques and statistical analyses are utilized, after spatially connecting urban land use data in Seoul Metropolitan Area with atmospheric data observed at Automatic Weather Stations (AWS). The research method is as follows: (1) To find out important land use factors on temperature, simple linear regressions for a specific time period (pilot study) are conducted with urban land use characteristics, (2) To make a final model, multiple regressions are carried out with those factors and, (3) To verify that the final model could be appled to explain temperature variations beyond the period, the model is extensively used for 5 different time periods: 1999 as a whole; summer in 1999; 1998 as a whole; summer in 1998; August in 1998. The results of simple linear regression models in the pilot study show that transportation facilities and open space area are very influential on urban air temperature variations, which explain 66 and 61 percent of the variations, respectively. However, the other land use variables (residential, commercial, and mixed land use) are found to have weak or insignificant relationship to the air temperatures. Multiple linear regression with the two important variables in the pilot study is estimated, which shows that the model explains 75 percent of the variability in air temperatures with correct signs of regression coefficients. Thus, it is empirically shown that an increase in open space and a decrease in transportation facilities area can leads to the decrease in air temperature. After the final model is extensively applied to the 5 different time periods, the estimated models explain 68 ∼ 75 percent of the variations in the temperatures is significant regression coefficients for all explanatory variables. This result provides a possibility that one air temperature model for a specific time period could be a good model for other time periods near to the period. The important implications of this result to lessen high air temperature we: (1) to expand and to conserve open space and (2) to control transportation-related factors such as transportation facilities area, road pavement and traffic congestion.