• Journal of the Korean Geographical Society
• /
• v.37 no.4
• /
• pp.385-402
• /
• 2002

This study examined temporal and spatial patterns of bioclimatic perceived sultriness in South Korea by analyzing the climatology of heat index calculated from ambient temperature and relative humidity for the period of 26 years (1973-1998). As results, spatially, bioclimatic sultriness above all thresholds frequently occurred mainly in the central western inner area, the southwestern inner area, and the southeastern inner area of South Korea. Especially, Miryang in the southeastern inner area of South Korea was proved to be, bioclimatically, the sultriest area in South Korea that has recorded frequent high heat index. Temporally, frequency of sultriness in the contiguous South Korea significantly increased in the 1990s. Specifically, In 1994, frequencies of heat index exceeding each threshold was the highest all over South Korea. Normally, the sultriness with high heat index exceeding 40.6$^{circ}C$ occurred mainly for the period of between the end of July generally after Summer Changma and the beginning of August before another small rainy season of years. These temporal-spatial distributions of bioclimatic sultriness in South Korea showed various patterns regionally, affected by physical and anthropogenic climatic factors such as topography, latitude, altitude, water bodies or aforestration, urbanization, and industrialization as well as movements of large-scale air masses.

• Geotechnical Engineering
• /
• v.7 no.4
• /
• pp.49-64
• /
• 1991

Abstract The stabilization by lime or Portland cement has long been the most commonly used methods for clay soil. But it wart the purpose of this reserch to define the effectiveness malt content on unconfined compressive strength of limeflay mixture and cementrlay mixture. From result of a laboratary investigation, saInt content in sample soil was not concernd with variation of PH value. PH value of lime 10% mixture and of cement 10% mixture were near 12.4, 11.6 respectively. In case of more than 7 curing days, PH value and Ca++ion concentration were decreased with increasing curing time. Also the result of X-ray difflection analysib for stabilized soil by admixture 10% in 90 curing days showed that the diffrection intensity of Tobermorite and Ettringite and other reaction products was smaller in the case of addition of salt 8% than malt 0% in stabilized soil. When lime-soil mixture and cement-boil mixture were cured in 2$0^{\circ}C$ and 5$^{\circ}C$, 2$0^{\circ}C$ cured mizture produced significantly higher compressive strength than 5t cured mixture and air dry curing sample produced higher than cured sample in water. The addition of salt 2~4% in conjuntion with lime or cement may accelerate strenth gain or not prevent front However, the addition of salt 8% prevent from strength gams.

• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.111-114
• /
• 2011

As a growth-template of ZnO nanorods (NR), a hexagonal $\beta-Ni(OH)_2$ nanosheet (NS) was synthesized with the low temperature hydrothermal process and its microstructure was investigated using a high resolution scanning electron microscope and transmission electron microscope. Zinc nitrate hexahydrate was hydrolyzed by hexamethylenetetramine with the same mole ratio and various temperatures, growth times and total concentrations. The optimum hydrothermal processing condition for the best crystallinity of hexagonal $\beta-Ni(OH)_2$ NS was determined to be with 3.5 mM at $95^{\circ}C$ for 2 h. The prepared $Ni(OH)_2$ NSs were two dimensionally arrayed on a substrate using an air-water interface tapping method, and the quality of the array was evaluated using an X-ray diffractometer. Because of the similarity of the lattice parameter of the (0001) plane between ZnO (wurzite a = 0.325 nm, c = 0.521 nm) and hexagonal $\beta-Ni(OH)_2$ (brucite a = 0.313 nm, c = 0.461 nm) on the synthesized hexagonal $\beta-Ni(OH)_2$ NS, ZnO NRs were successfully grown without seeds. At 35 mM of divalent Zn ion, the entire hexagonal $\beta-Ni(OH)_2$ NSs were covered with ZnO NRs, and this result implies the possibility that ZnO NR can be grown epitaxially on hexagonal $\beta-Ni(OH)_2$ NS by a soluble process. After the thermal annealing process, $\beta-Ni(OH)_2$ changed into NiO, which has the property of a p-type semiconductor, and then ZnO and NiO formed a p-n junction for a large area light emitting diode.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.43-51
• /
• 2001

Now our ocean environment pollution is very serious. Its harm hinders in marine breeding and the safe navigation of ships at the coast. We have used an assembly system for a measure taken against environment pollution like this. But, here are some problems awaiting solution. First, most of combustible materials among ocean waste are high polymer, so it is necessary some special equipment to incinerate them. In the process we can't overlook air pollution by exhaust gas. Also, when we reclaim these wastes, we remember that they can't be decomposed naturally and leaking water may pollute soil. Thus now a days new treatment method has been developed, it recycles and doesn't product secondary pollution materials by recovering oil from pyrolysis. For it, this study investigated chemicalㆍphysical properties of wastes. And it found condition of recovering the most oil. Also it probed that the variation of temperature raising speed affects the weight reduction characteristics of wastes. Also, while studying recovered oil by waste pyrolysis and the rate of non-condensing gas in accordance with the variation of temperature raising speed. Finally we had confidence the development of pyrolysis oil recovery would succeed because we carried out evaluation at an economic point of view about it.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.170-176
• /
• 2012

This paper analyzes the sea state and characteristics during the August 2011 passage of Typhoon Muifa based on data measured at four ocean weather/wave observation stations (buoys) located on the southwestern coast of Korea. When the typhoon arrived in the area approximately 230 km west of Mokpo at 9 PM on August 7, the decrease in air pressure led to increases in sea level of 25.64 cm at the Chilbal-do buoy, 16.43 cm at the Geomun-do buoy, and 9.60 cm at the Geoje-do buoy. The maximum wave height increased at the Geomun-do buoy about seven times faster than at the Chilbal-do buoy. The low water temperature at Chilbaldo during the typhoon passage probably reduced the wave energy. In the face of the oncoming typhoon, the southwest direction of the wind and waves may have been the result of external forces transporting seawater (energy) from the open sea toward the coast. The weather and ocean data from the Mara-do buoy were negatively correlated with those of Chilbal-do, whereas the data from Geomun-do had a positive correlation with those of Geoje-do.

• Korean Journal of Agricultural Science
• /
• v.20 no.2
• /
• pp.181-188
• /
• 1993

Frozen korean traditional poultries(Manyker, Korean native fowl, Ogol fowl and Pheasant) were thawed at $5^{\circ}C$, and $20^{\circ}C$ in the air, and using a microwave oven. Effect of thawing methods on the quality of Korean poultry was investigated. The pH of the poultry muscle was lowered after thawing in all treatments. The pH of the muscle thawed by microwave oven was the lowest. The quantity of drip released after thawing was the least in a microwave thawing. The quantity of drip in Maniker and Pheasant was loss than Ogol fowl. The relationship between pH and water binding capacity showed highly significant, and the drip quantity after thawing increased as the pH decreased. Leg muscle has higher strength than breast muscle in all the Korean poultry. Shear strength of all the poultry muscle showed closely relative related to the pH. As the pH lowered, the shear strength of the muscle was also decreased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.12
• /
• pp.1760-1766
• /
• 2009

Physical properties of Yukwa base extruded with glutinous rice flour, rice flour, defatted soy flour, and salt using an twin-screw extruder were investigated. The ingredients were extruded at various moisture contents (16-18%), screw speeds (300 & 400 rpm) at 43.4 kg/hr feed rate. Length and specific volume of Yukwa base increased with decreasing moisture contents. Hunter's color L* values of Yukwa base was higher whereas $a^*\;and\;b^*$ values were lower with increasing moisture content. Water absorption index of Yukwa base increased with increasing moisture contents. X-ray diffraction of Yukwa base showed B type moisture content of 16% and 17% while it showed A type moisture content of 18%. Degree of crystallinity and breaking strength of Yukwa base were the lowest in the moisture content of 16% while the lowest value for hardness was found in the moisture content of 16% and of 17% with screw speed 400 rpm for all samples. In the microstructure of cross section of Yukwa base, air cell size was larger and cell wall was thicker as moisture content increased. The sensory evaluation of the Yukwa base showed that color and flavor were not significantly different among samples, while taste, appearance, mouth feel, and overall preference were higher as moisture contents decreased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.8-14
• /
• 2017

Improvements in the standard of living and lifestyle have led to increased sales of frozen milk products, such as soft ice cream or slush. These frozen milk products are commonly made in a small refrigeration machine. In a soft ice cream machine, the freezer is composed of a concentric cylinder, where the refrigerant flows in the annul us and the ice cream is made in the cylinder by a rotating scraper. In this study, an optimization and performance evaluation were conducted on a soft ice cream machine having a freezer volume of 2.8 liters. The optimization was focused on the scraper rotation speed and the refrigerant path of the freezer. The measurements included the temperature, pressure and consumed power. At the optimized speed of 124 rpm, ice cream was produced in 6 minutes and 2 seconds, and the COP was 0.90. Through a flow visualization study using air-water, the refrigerant path was improved. The improved design reduced the ice cream making time significantly. The present results may be used for the optimization of other refrigeration cycles, including those of frozen food products.

• Journal of Korean Society of Forest Science
• /
• v.63 no.1
• /
• pp.1-8
• /
• 1984

These surveys were conducted to estimate the winter bird population inhabiting in the estuary of Nakdong River by unit distances, by unit times, by sections and by observation points. The results were summarized as follows: 1) A total of 70,032 birds were observed, which composed of 82 species under 27 families. 2) An average of 2,103.06 individuals per kilometer was observed and 23,344.00 individuals per hour. Anatidae showed the most dominance (65.13% of the total), followed by Scolopacidae(14.55%), and Laridae(7.28%). 3) The present population by areas were observed as follows; 61.8% of the total in the tideland and swamp, 31.9% in the surface of water, and 6.4% in the air and land, respectively. 4) Among the five sections, the greatest population was observed in section 3 which figured 22,852 individuals (30.0%), and the least in section 4 (9.8%). 5) In this observation point, six species such as Anas platyrhynchos, Tadorna tadorna, Anser albifrons, Aythya ferina, Calidris alpina and Larus crassirostris were the most dominant birds inhabiting which reached 83.1% of the total.

• Journal of Life Science
• /
• v.25 no.5
• /
• pp.577-584
• /
• 2015

Orostachys malacophyllus grow on the old roofing tile or on the rock of mountain and is belong to Crassulaceae family. After air drying for Orostachys malacophyllus (OM), using the mixture of lactic acid bacteria (Lactobacillus bulgaricus, Streptococcus thermophilus, Lactobacillus acidophilus) was fermented (FOM). OM and FOM extracted using water (W), ethanol (E) and methanol (M) and were measured extracts yield, pH and Brix. Extracted OM and FOM were tested by in vitro experimental models of α,α´-diphenyl-β-picrylhydrazyl (DPPH) radical scavenging activity, Fe/Cu reducing power, linoleic acid peroxidation using ferric thiocyanate and thiobarbituric acid (TBA) methods and peroxidation of rat liver homogenate. In addition, the bioactive materials (phenolic compounds, flavonoids and minerals) were measured. The highest phenolic compounds and flavonoids were OME 122.2 mg/100 g and OME 84.0 mg/100 g. OM and FOM′s major minerals were K, Ca and Mg. The highest free radical scavenging activity showed in FOMM (93.9%), OMM (93.4%), FOME (92.1%) and OME (91.9%) at 0.5% additional level. Fe reducing powers were strong in FOME and FOMM and Cu reducing powers were strong in OME and FOMM. Antioxidant activities on lipid peroxidation using rat homogenate as measured by TBARS method showed strong in FOME and on lipid peroxidation of linoleic acid as measured by ferric TBA method showed strong in OME and FOME and measured by ferric thiocyanate showed strong in FOME and FOMM.