• 설비공학논문집
• /
• 제15권11호
• /
• pp.964-969
• /
• 2003

The objective of this study is to investigate the effect of surfactant on the onset of Marangoni convection adapting a non-linear surface equation of state. The surface tension gradient with respect to the absorbate concentration, ${\gamma}$, is linearly related to the surface concentration of a surfactant with a coeffcient $x_{A}$. The numerical results show that the role of the initial surfactant concentration to Marangoni instability changes from the stabilizer to the destabilizer depending on the change of the sign of $x_{A}$ from negative to positive. It is concluded that for $x_{A}$>0 there is a critical modified Marangoni number of surfactant $M_{Ac}$ $^{*}$ above which liquid layer is always unstable against long wave disturbances.rbances.

• 한국세라믹학회지
• /
• 제53권4호
• /
• pp.450-455
• /
• 2016

Color change in single-crystal, yellow, red, purple, and colorless cubic zirconias (CZs) was investigated as a function of annealing in vacuum and air atmosphere at $800-1400^{\circ}C$ for 30 min, for development of a damascene process of plugging a precious metal paste at the elevated temperature. Coloring-element contents of the CZs were evaluated using WD-XRF, and the color change determined visually by naked eye, and using a digital camera and UV-Vis-NIR color analyzer. WD-XRF showed that all of the CZs had cubic-phase stabilizer elements and coloring elements. All CZs that underwent vacuum annealing exhibited a slight color change at $<900^{\circ}C$, while their colors began to change to black at $1100^{\circ}C$, and became opaque black at $1400^{\circ}C$. After air annealing, there was almost no color change up to $1400^{\circ}C$. Since red and purple CZs showed greater color difference (CD) values than the others, the degree of CD is likely to depend on the original color of the CZ due to the different stabilities of their coloring elements during annealing. Based on our results, it is suggested that annealing in air at $<900^{\circ}C$ is advantageous, and assorted colored CZs can be used for precious metal damascene.

• 한국음향학회지
• /
• 제8권1호
• /
• pp.75-80
• /
• 1989

단일모드 광섬유를 이용하여 호모다인 검출방식으로 동작하는 Mach-Zehner 광섬유 간섭계를 구성하여 공기중 음압반응을 조사하였다. 광섬유 간섭계 센서가 직각조건에서 동작하도록 하기 위해 기준 광섬유에 원통형 압전신장기를 사용하는 신호안정화 장치를 제작하였다. 이는 온도변화나 주위환경의 영향에 관계없이 광섬유 간섭계 센서의 감도를 최대의 크기로 일정하게 유지시켜 준다.

• Environmental Analysis Health and Toxicology
• /
• 제18권1호
• /
• pp.63-67
• /
• 2003

Benzoic acid is produced about 700 tons/year in Korea as of 1998 survey. Most is used as a stabilizer in the processes of synthesis of pharmaceuticals and dyes. It is also used for ingradient of paint, disinfections, and antifungals. Due to the antioxidant activity of benzoic acid, the chemical is also used as food preservatives. Although the chemical is widely used in Korea, exposure levels in air, water, soil or sediment have not been monitored or estimated so that risk evaluation of benzoic acid was not possible. In this study, distribution of the chemical among environmental media was estimated using EQC model based on the chemical-physical properties. In Level I and II of which the chemical are hypothesized in equilibrium and no transfer through the media, more than 93％ of benzoic acid are estimated to be distributed in water. However, in Level III of which non-equilibrium and intermedia transfer could be occurred, the chemical is estimated to distributed to soil, 64％ and water,35% as of total amount.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.401-402
• /
• 2005

The important parts of material science in the film preparation fields and sol-gel technology are presented. For the present work, a series of amorphous films was prepared in air by sol-gel method without using some alkoxide stabilizer, which reduces the reactivity of the metal alkoxides. The choice of precursors can affect the chemical-reaction kinetics, microstructures and properties of the product. In this report author compared the crystallization behavior of oxide functional films derived from the same precursors, stressing the influence of experiment conditions and where it was possible to obtain the uniform amorphous or crystalline dielectric films. A short analysis of sol-gel technology and thin film methods about development of dielectric materials has been given.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.551-552
• /
• 2006

This study was attended to demonstrate synthesis of silver nanoparticles stabilized with polymer and their applicability to printed electronics. Silver nanoparticles were synthesized by reduction of silver nitrate in aqueous solution in the presence of polyvinyl pyrrolidone (PVP) as a stabilizer. The ink used here is composed of 50 wt% Ag NP, 15 wt% humectant and then were printed on polyimide film. Particle deposit morphologies were controlled by varying the ink compositions. Printed silver patterns and dots were cured on a convection oven in air at $300^{\circ}C$ for 60 min. The printed patterns show good shape definition and the resistivity of the printed films is about $5{\mu}{\Omega}{\cdot}cm$.

• 공업화학
• /
• 제24권4호
• /
• pp.357-362
• /
• 2013

High efficiency particulate air (HEPA) 필터를 시험하기 위하여 단분산 polystyrene latex spheres (PLS) 및 PS-MPS/실리카복합 나노구체가 이용되었다. 사용된 모든 나노구체들은 필터시험 전에 평균입경과 변동계수 값을 측정하여 시험용 인조먼지로서 적정함을 평가하였다. PLS 및 복합 나노구체의 입경은 유화중합 중 반응온도와 안정제의 양을 조절하여 100~300 nm 범위에서 잘 조절되었으며, 변동계수의 경우도 단분산 입자분포로 판단되는 15%보다 낮은 3~7% 범위이었다. 한편 HEPA 필터시험 결과는 사용된 모든 나노구체들이 공기필터의 시험을 위한 시험용 인조먼지로서 아주 적절함을 보여주었다.

• 한국토양비료학회지
• /
• 제38권5호
• /
• pp.287-293
• /
• 2005

본 연구에서는 농업용 미생물제 수요의 증가에 따른 보다 안정한 미생물제 공급과 규격화된 품질 보증 및 미생물제 생산성 확대를 위하여 식품 산업에서 활용되고 있는 미생물제의 미세캡슐화 기술을 응용하여, 농업용 미생물제 캡슐화 소재선발 및 캡슐화 최적조건을 조사하고 생산된 미생물 캡슐제의 생균력과 안정성에 관하여 검토하였다. 본 실험의 캡슐화 장치는 extrusion 기법에서 주로 사용되고 있는 air atomizing device 대신 저속의 연동펌프를 이용한 micro-nozzle 방식을 설계하여 수행하였다. 농용 미생물의 캡슐화 소재선발을 위해 bead 형성이 용이하며 생균력을 안정적으로 유지할 수 있고 저렴한 비용으로 구입이 가능한 캡슐제를 조사한 결과 Na-alginate와 K-carragenan은 bead 형성이 우수하게 나타났으며 캡슐내 생균수는 $5.3-7.4{\times}10^7cfu\;g^{-1}$로 gellan gum과 locust bean gum 등에 비하여 6배 이상 높은 생균수를 나타냈다. Na-alginate의 경우 캡슐이 매우 단단하고 매끄러웠으며, K-carragenan보다 7배 이상 저렴한 것으로 조사되었다. 이상 농업용 미생물제의 캡슐화 소재로서 Na-alginate를 사용하는 것이 가장 효율적이고 경제적이라 판단되었다. 농업용 미생물제의 캡슐화를 위한 최적의 캡슐화 소재로 1.5% 농도의 Na-alginate에 1.0% starch와 같은 안정제를 혼합하여 사용할 경우 생균력을 유지하는 데 보다 안정적이었다. 최적조건에서 형성된 캡슐의 형태를 관찰한 결과 캡슐의 표면구조는 매끈하고 규칙 바른 구형을 나타내었으며, 내부 구조는 비교적 균일한 polymatrix를 형성하였 으며 부분적으로 큰 공극을 형성하였다. 미세 캡슐 내 미생물 생존력을 유지하기 위한 캡슐막의 효과를 나타낼 수 있는 안정제로 저렴한 가격으로 구입이 용이한 starch와 zeolite를 이용하여 생균력 증진효과를 검토하였다. 세균을 이용한 미생물 캡슐체의 경우 starch와 zeolite 모두 약 70-80% 생균력을 나타내었으며, 효모의 경우 starch를 안정제로 이용한 경우 67%의 생균력을 나타내었으나 zeolite를 안정제로 첨가한 경우 80% 이상의 높은 생균력 증진을 나타내었다. 이상의 결과로부터 미생물을 캡슐화 할 경우 무기재료인 zeolite를 첨가할 경우 장기간 생균력 안정성이 유지되는 것으로 나타났다.

• 한국산업보건학회지
• /
• 제20권1호
• /
• pp.10-18
• /
• 2010

To provide necessary information for future environmental monitoring of smelting and litharge making industries in Korea, environmental monitoring dataset of air lead concentration of 4 lead industries(1 primary smelting, 2 secondary smelting and 1 litharge making industry) were analyzed from 1994 to 2007. Data were compared using geometric mean and standard deviation with minimum and maximum values according to year of measurement, type of lead industries and type of operation of lead industries. The geometric mean and standard deviation of air concentration for a total of 1140 samples in all lead industries for overall 14 years were 70.7${\mu}g/m^3$ and 5.51 with minimum of 1${\mu}g/m^3$ and maximum of 9,185 ${\mu}g/m^3$. The overall geometric means of air concentration were above the permissible exposure levels(PEL) until year of 2001 and thereafter they were remained at the level of half of PEL. The geometric means of primary smelting, secondary smelting and litharge making industry for overall 14 years were 21.7${\mu}g/m^3$(number of samples: 353), 82.5${\mu}g/m^3$(number of samples: 357) and 164.2 ${\mu}g/m^3$(number of samples: 430) respectively. In primary smelting industry, the highest geometric mean air concentration was 35.4 ${\mu}g/m^3$ in the secondary smelting operation; followed by casting operation (24.9 ${\mu}g/m^3$) and melting operation (14.9 ${\mu}g/m^3$), respectively. On the other hand, in secondary smelting industries, the highest geometric mean air concentration was 125.4${\mu}g/m^3$ in melting operation; followed by casting operation (90.5${\mu}g/m^3$) and pre-treatment operation (43.4${\mu}g/m^3$), respectively. However, in litharge making industries, there were no significant differences of geometric mean air concentrations between litharge operation and stabilizer operation. The proportion of over PEL (50${\mu}g/m^3$) was highest in litharge industry and followed by secondary smelting industries. However The proportions of over PEL(${\mu}g./m^3.$) were decreased by the years of environmental monitoring. The significant reduction of mean air lead concentration since year of 2000 was observed due to more active environmental engineering control and new introduction of new operation in manufacturing process, but may be also influenced by non-engineering method such as reduction of operation hours or reduction of exposure time during actual environmental measurement by industrial hygienist according to more strict enforcement of occupational and safety law by the government.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1534-1538
• /
• 2011

Uniform, hollow nanosilica spheres were prepared by the chemical coating of cationic polystyrene (cPS) with tetraethylorthosilicate (TEOS), followed by calcination at 600 $^{\circ}C$ under air. cPS was synthesized by surfactant-free emulsion polymerization using 2,2'-azobis (2-methyl propionamidine) dihydrochloride as the cationic initiator, and poly(vinyl pyrrolidone) as a stabilizer. The resulting cPS spheres were 280 nm in diameter, and showed monodispersion. After coating, the hollow silica product was spherically shaped, and 330 nm in diameter, with a narrow distribution of sizes. Dispersion was uniform. Wall thickness was 25 nm, and surface area was 96.4 $m^2/g$, as determined by BET. The uniformity of the wall thickness was strongly dependent upon the cPS surface charge. The effects of TEOS and ammonia concentrations on shape, size, wall thickness, and surface roughness of hollow $SiO_2$ spheres were investigated. We observed that the wall thicknesses of hollow $SiO_2$ spheres increased and that silica size was simultaneously enhanced with increases in TEOS concentrations. When ammonia concentrations were increased, the irregularity of rough surfaces and aggregation of spherical particles were more severe because higher concentrations of ammonia result in faster hydrolysis and condensation of TEOS. These changes caused the silica to grow faster, resulting in hollow $SiO_2$ spheres with irregular, rough surfaces.