• Asian Journal of Atmospheric Environment
• /
• v.9 no.4
• /
• pp.272-279
• /
• 2015

The information about the dispersion and scavenging of traffic-related pollutants at the locations near busy expressways is very helpful to highway planners for developing better plans to reduce exposures to air pollution for people living as well as children attending schools and child care centers near roadways. The objective of the current study was to give information in the dispersion and scavenging of vehicle-derived pollutants at the region near a busy urban expressway by a combination of two different model calculations. The modified Gaussian dispersion model and the Lagrange type below-cloud scavenging model were applied to evaluate $NO_x$ dispersion and DEP (Diesel exhaust particles) wet removal, respectively. The highest $NO_x$ was marked 53.17 ppb within 20-30 meters from the target urban expressway during the heaviest traffic hours (08:00AM-09:00AM) and it was 2.8 times higher than that of really measured at a nearby ambient measuring station. The calculated DEP concentration in size-resolved raindrops showed a continuous decreasing with increasing raindrop size. Especially, a noticeable decrease was found between 0.2 mm and 1.0 mm raindrop diameter.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.6
• /
• pp.573-584
• /
• 2015

In this study, the atmospheric dispersion of radioactive material ($^{137}Cs$) was simulated with regard to its impact within a 50-km radius from the Kori Nuclear Power Plant (NKPP) based on two different types of models (the non-steady-state puff model CALPUFF and the lagrangian model HYSPLIT) during the spring of 2012 (May 2012). The dispersion distribution of $^{137}Cs$ calculated in the CALPUFF model was similar to that of the HYSPLIT model, but the magnitudes of differences in its spatio-temporal concentrations between the two models were different. The $^{137}Cs$ concentrations simulated by the CALPUFF were significantly lower than those of the HYSPLIT due to a limitation of puff models (e.g. puff size growth over time). The CALPUFF had the advantage of determining the dispersion of radioactive materials and their impacts on the surrounding regions, compared with the HYSPLIT that had high concentrations of $^{137}Cs$ in only small local areas with the movement of air masses along the local winds.

• Journal of Environmental Science International
• /
• v.13 no.10
• /
• pp.891-902
• /
• 2004

In order to predict air pollution and Yellow-sand dispersion precisely, it is necessary to clarify the sensitivity of meteorological field input interval. Therefore numerical experiment by atmospheric dynamic model(RAMS) and atmospheric dispersion model(PDAS) was performed for evaluating the effect of temporal and spatial resolution of meteorological data on particle dispersion. The results are as follows: 1) Base on the result of RAMS simulation, surface wind direction and speed can either synchronize upper wind or not. If surface wind and upper wind do not synchronize, precise prediction of Yellow-sand dispersion is strongly associated with upwelling process of sand of particle. 2) There is no significant discrepance in distribution of particle under usage of difference temporal resolution of meteorological information at early time of simulation, but the difference of distribution of particles become large as time goes by. 3) There is little difference between calculated particles distributions in dispersion experiments with high temporal resolution of meteorological data. On the other hand, low resolution of meteorological data occur the quantitative difference of particle density and there is strong tendency to the quantitative difference.

• ETRI Journal
• /
• v.42 no.2
• /
• pp.282-291
• /
• 2020

The study reports on the design and performance of two air-filled and two partial ethanol-filled photonic crystal fiber (PCF) structures with a tetra core for supercontinuum generation. The PCFs are nonlinear with ultra-flattened zero dispersion. Holes with smaller areas are used to create a tetra-core PCF structure. Ethanol is filled in the holes of smaller area while the larger holes of cladding region are airfilled. Optical properties including dispersion, effective mode area, confinement loss, normalized frequency, and nonlinear coefficient of the designed PCF structures are investigated via full vector finite difference time domain (FDTD) method. A PCF structure with lead silicate as wafer exhibits significantly better results than a PCF structure with silica as wafer. However, both structures report dispersion at a telecommunication wavelength corresponding to 1.55 ㎛. Furthermore, the PCF structure with lead silicate as wafer exhibits a very high nonlinear coefficient corresponding to 1375 W^-1 km^-1 at the same wavelength. This scheme can be used for optical communication systems and in optical devices by exploiting the principle of nonlinearity.

• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.567-574
• /
• 2016

We propose a highly birefringent and dispersion compensating photonic crystal fiber based on a double line defect core. Using a finite element method (FEM) with a perfectly matched layer (PML), it is demonstrated that it is possible to obtain broadband large negative dispersion of about -400 to -427 ps/(nm.km) covering all optical communication bands (from O to U band) and to achieve the dispersion coefficient of -425 ps/(nm.km) at 1.55μm. In addition, the highest birefringence of the proposed PCF at 1.55 μm is 1.92 × 10^-2 and the value of birefringence from the wavelength of 1.26 to 1.8 μm (covering O to U bands) is about 1.8 × 10^-2 to 1.92 × 10^-2. It is confirmed that from the simulation results, the confinement loss of the proposed PCF is always less than 10^-3 dB/km at 1.55 μm with seven fiber rings of air holes in the cladding.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.1
• /
• pp.9-16
• /
• 2009

Cylindrical dry forming mould was developed to carry out a feasibility study of dry forming of papers. The effect of disintegration, forming, humidification and pressing on dry formed papers was examined. Dry disintegrated fibers showed the similar fiber length distribution to wet disintegrated fibers, but they showed distorsion and damaged appearance on the surface. Process parameters required to form a uniform fiber pad was investigated. A proper screening and air dispersion method was selected that gives proper formation. Humidification and pressing conditions were examined to get a good dry formed papers in dry forming. Results showed that dry forming method can be used to make a sheets with reasonable formation and properties.

• Journal of ILASS-Korea
• /
• v.1 no.2
• /
• pp.66-73
• /
• 1996

The present study investigates experimentally the characteristics of liquid jet, which is, the spray flow in the normal direction of the air stream under the flow conditions of air velocity $110\sim125m/s$. The present study adopts with the flow visualization technique using a short duration light bulb and the image processing analyse with CCD camera. Two types of injector were used: one is a flat plate type, and the other is backward facing step type, which height are 5, 8, 10mm. Dispersion of liquid jet can be represented by gray level of CCD camera. In the upstream of liquid jet, the backward facing step shows better liquid jet penetration. However, in the downstream. mean droplet size for backward facing step injector is smaller than that for flat plate injector

• Journal of the Korean Ceramic Society
• /
• v.27 no.1
• /
• pp.109-117
• /
• 1990

Magnetite for Water-based ferrofluid was synthesized by air oxidation of aqueous suspension in the pH range 7-12 at $65^{\circ}C$. The optimum condition of magneite formation was delineated by examining various physicochemcial properties such as Fe2+ content, phase characteristics, MHC and $\sigma$max. The point of zero charge of iron oxide powders obtained at various pH conditions were correlated with the oxidation state of Fe in the iron oxide. The magnetite powder prepared at pH 9 ws dispersed using sodium oleate and sodium dodecylbenzenesulfonate (SDBS) as dispersants, and the dispersion characteristics of the magnetite ferrofluid were examined by means of the fraction of solid dispersed, zeta potential data and FT-IR spectrum. A simple calculation on the potential energy of two interacting magnetite particles showed that the dispersion stability was directly correlated with height of the potential energy barrier or the shape of zeta potential.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.824-834
• /
• 1999

Characteristics of two-phase flow and heat transfer were numerically investigated in a submerged gas injection system when temperature of the injected gas was different from that of the liquid. The Eulerian approach was used for both the continuous and dispersed phases. The turbulence in the liquid phase was modeled using the standard $k-\varepsilon$$\varepsilon$ turbulence model. The interphase friction and heat transfer coefficient were calculated from the correlations available in the literature. The turbulent dispersion of the phases was modeled by a "dispersion Prandtl number". In the case with heat transfer where the temperature of the injected gas is higher than the mean liquid temperature, the axial and the radial velocities are lower in comparison with the case of homogeneous temperatures. The results in the present research are of interest in the design and operation of a wide variety of material and chemical processes.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.363-364
• /
• 2000

2000년 7월 환경부에서 발표한 대기오염물질 배출사업장의 수는 32,437개소이고, 그 중에서 대형굴뚝이 있는 1종 ∼ 3종 사업장이 3,117 개소에 이르고 있다. 이들 사업장의 대부분은 굴뚝을 통하여 오염물질을 배출하고 있다. 국내외적으로 21세기 대기환경관리 정책방향은 사업장의 대기오염물질 배출원 관리를 강화하고 있고, 대기오염물질 배출규제방식도 기존의 배출농도 규제중심에서 배출원이 주변지역에 미치는 기여농도를 중심으로 이동하는 추세이다. (중략)