• 설비공학논문집
• /
• 제18권2호
• /
• pp.172-179
• /
• 2006

This study developed a program for detecting charged refrigerant amount in system air-conditioner. System air-conditioner is an air-conditioning system with multiple indoor units. Due to the complexity of the system, it is more difficult to detect the refrigerant amount charged in the system air-conditioner than in a general single air-conditioner. Experiments were performed for a 6 HP outdoor unit with 3 indoor units in a psychrometric calorimeter. The experimental amount of the charged refrigerant was ranged from $60\%\;to\;140\%\;with\;10\%$ increasement. Fuzzy algorithm was employed for detecting the charged refrigerant amount in the system air-conditioner. The experimental data were used for curve-fitting for the general ranges of indoor and outdoor temperature conditions. Membership function was determined for the whole ranges of experimentally measured data and rule-bases were defined for each charged refrigerant amount. Developed program successfully predicted the measured data within $10\%$ resolution range.

• 환경위생공학
• /
• 제18권2호
• /
• pp.42-51
• /
• 2003

Public awareness of air pollution problem has increased the need for real time air pollution information system about changes in air pollution level. The purpose of this study is to construct e-AIR, a user-friendly air pollution information system for urban air quality using GIS(geographic information system) technology for windows. GIS was ideally suited featuring a geographical characteristics(e.g., road, traffics, buildings) and very effectively used in mapping and symbolization for the distribution of the spatial/periodic pollution status(e.g., pie or column chart, graduated symbols) which can be effectively applied to a information system on the web-site. And a user interface, GUI(graphic user interface) was designed very diversely and simply enabled the users connect with e-AIR and obtain a useful information of air quality. A interpretive technique, air pollution health index(e.g., PSI, AEI) was used also which transforms complex data on measured atmospheric pollutant concentrations into a single number or set of numbers in order to make the data more understandable. Eventually the final-step of this study was to construct e-AIR based on Web GIS could be assessed anywhere if internet is available and offer a very useful information services of the air pollution to the public like a weather news.

• 한국대기환경학회지
• /
• 제25권2호
• /
• pp.167-174
• /
• 2009

The AIRWARE System was developed from one of the EUREKA PROJECT E!3266-EUROENVIRON WEBAIR System. The AIRWARE can nowcast and forecast the air quality of Seoul and Gyeonggi-do regions. To nowcast and forecast concentration of pollutants, MM5, AERMOD/CAMx, and SMOKE Models were used for each meteorologic data, measured data, and emission data. All DB were constructed for 2001 year. The episode analysis and time series analysis were accomplished to analyze the AIRWARE reliability. The simulated results were very well agreed with measured result for measured pollutants and meteorological data. The developed AIRWARE system can analyze with real-time, support web-based air quality information. This information can used with policy data to manage the air quality and prepare reduction plan in air impact assessment or air environmental plan.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권3호
• /
• pp.168-174
• /
• 2004

On-line monitoring system(OMS) has been developed for the pumped storage generator/motor The OMS is applied to diagnosis of the PD(partial discharge) activity of stator insulation, the shorted-turn of rotor winding and the variation of the air-gap between stator and rotor. The OMS consists of DAS(data acquisition system), main server system, gateway and display PC. The DAS measures the PD, the shorted-turn and air-gap from three sensors installed on the generator/motor. The gateway controls the data which sent by DAS. The main server system saves the data, analyzes the data and conducts the diagnostic algorithm. The display PC shows the diagnostic results of partial discharge, shorted-turn and air-gap. Field tests were conducted using PDA(partial discharge analyzer). The results of the OMS and PDA measurements can be directly correlated with normalized quantity number(NQN), PD magnitude(Qm) and PD pattern.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1770-1773
• /
• 2005

The performance evaluation of AOV(air-operated valve) requires the processes to confirm the actuator system capability. It is necessary to evaluate the thrust of the air actuator for the margin evaluation. In this paper, to evaluate and analysis the air actuator, the performance test system and operating program are developed. This system is composed of several sensors such as pressure sensor, LVDT, and LoadCell which are used to get the data for evaluation. The LabVIEW was used for developing the operating program. The test system and operating program are proved through the actual test of the diaphragm actuator.

• 한국HCI학회논문지
• /
• 제3권2호
• /
• pp.1-8
• /
• 2008

본 논문에서는 미세 규모 대기 환경 모니터링 시스템 Airscope[3]의 가상현실 기반 시각화 시스템인 VRSMS(VR-based Sensor Management System)을 소개 한다. 가상현실 기반 시각화 방법을 이용해 대기 환경 정보를 시각화함으로써 시민 등의 비전문가들이 직관적으로 대기 환경 정보를 인지할 수 있고 사용자가 원하는 정보를 보다 쉽게 취득할 수 있도록 가상공간 내부에 설치된 센서를 직접 조작할 수도 있다. 사용자 요구에 맞춘 동적 시각화를 위해 대기 환경 데이터와 조작 및 시각화 기법을 분리하였고 이는 시스템 내부 데이터에 대한 일관된 접근 방법을 제공하여 새로운 시각화 기법의 추가가 용이하다. 동적 시각화 기법 중의 하나로 복수의 소형 디스플레이를 연결하여 대형 디스플레이 시스템을 구축하였으며 이는 단일 대형 디스플레이 시스템에 비해 저렴한 비용으로 공공장소 등에서 다수의 사용자가 보다 쉽게 대기 환경 정보를 취득할 수 있게 한다.

• 한국항행학회논문지
• /
• 제22권5호
• /
• pp.367-374
• /
• 2018

차세대 통신링크를 활용한 항공로 교통 관리를 위해 궤적 기반의 관제 지원 스케줄링 시스템을 제안하였다. 차세대 ATS (air traffic services) 데이터링크인 Baseline 2를 사용하는 4DTRAD (4-dimensional trajectory data link) 서비스 내용을 기반으로 항공로 상을 비행 중인 항공기를 대상으로 하는 궤적기반운용 수행 절차를 수립하고 기술하였다. 이러한 절차를 바탕으로, 다양하고 복잡한 데이터 활용으로 인한 관제사의 업무 부담을 완화하기 위해 지상 시스템이 수신한 항공기 데이터를 처리하여 궤적을 예측하고 관제 조언 정보를 제공하는 스케줄링 시스템의 프로토타입을 개발하였다. 또한, 궤적 기반 항행을 위한 시뮬레이션 환경을 구성하여 개발 시스템에 대한 스케줄링 기능을 확인하였다.

• 항공우주시스템공학회지
• /
• 제15권6호
• /
• pp.42-49
• /
• 2021

To develop a high-resolution electro-optical/infrared (EO/IR) payload to be mounted on a high-speed and performance fighter aircraft in an external POD for acquiring daytime and nighttime image information on tactical targets, simulations, including flight environments and maneuvers, should be performed. Such simulations are pertinent to predicting the performance of several variables, such as aerodynamic force and inertia load acting on the payload. This paper describes the development of a flight data acquisition and analysis system based on flight simulation software (SW) for mission simulation of super-maneuverability fighter equipped with EO/IR payload. The effectiveness of the system is verified through comparison with actual flight data. The proposed flight data acquisition and analysis system based on FlightGear can be used as an M&S tool for system performance analysis in the development of the EO/IR payload.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.299-309
• /
• 2014

When using an automotive heating, ventilation, and air conditioning (HVAC) system, we can obtain fresh outside air while maintaining the interior vehicle temperature. In this study, a correction equation considering experimental data for automotive indoor air leakage is defined to simulate the ratio of fresh air to recirculated air in the automobile cabin. With this correction equation, numerical results are compared with experimental data and validated. The $CO_2$ concentration in the automotive cabin is evaluated by considering various boarding conditions and mass flow rates of the HVAC system. The $CO_2$ concentration model derived in this study is expected to be used to control the effective air conditioning and become a basic research tool for automotive air quality control system development.

• 한국환경과학회지
• /
• 제16권10호
• /
• pp.1127-1137
• /
• 2007

We focused on effects on data assimilation of simulated wind fields by using upper-air observations (wind profiler and sonde data). Local Analysis Prediction System (LAPS), a type of data assimilation system, was used for wind field modeling. Five cases of simulation experiments for sensitivity analysis were performed: which are EXP0) non data assimilation, EXP1) surface data, EXP2) surface data and sonde data, EXP3) surface data and wind profiler data, EXP4) surface data, sonde data and wind profiler data. These were compared with observation data. The result showed that the effects of data assimilation with wind profiler data were found to be greater than sonde data. The delicate wind fields in complex coastal area were simulated well in EXP3. EXP3 and EXP4 using wind profiler data with vertically high resolution represented well sophisticated differences of wind speed compared with EXP1 and EXP2, this is because the effects of wind profiler data assimilation were sensitively adjusted to first guess field than those of sonde observations.