• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2192-2197
• /
• 2008

An experimental study was performed to investigate the effects of configuration of burner and air excess ratio on CO & NOx emission characteristics of the cooktop burners which are used extensively. In this study, the combustion characteristics were investigated with the variation of design factor of cooktop burners. The results showed that as the thermal input increases, flammable region go narrower. With the increase of loading height from the cap to grate, the CO emission decrease owing to the reduction of quenching by flame impingement on the load. Additionally, the CO emission increase with angle of main slot, however the NO emission is almost unaffected.

• Nuclear Engineering and Technology
• /
• 제37권6호
• /
• pp.525-536
• /
• 2005

The interfacial area transport equation dynamically models the changes in interfacial structures along the flow field by mechanistically modeling the creation and destruction of dispersed phase. Hence, when employed in the numerical thermal-hydraulic system analysis codes, it eliminates artificial bifurcations stemming from the use of the static flow regime transition criteria. Accounting for the substantial differences in the transport mechanism for various sizes of bubbles, the transport equation is formulated for two characteristic groups of bubbles. The group 1 equation describes the transport of small-dispersed bubbles, whereas the group 2 equation describes the transport of large cap, slug or chum-turbulent bubbles. To evaluate the feasibility and reliability of interfacial area transport equation available at present, it is benchmarked by an extensive database established in various two-phase flow configurations spanning from bubbly to chum-turbulent flow regimes. The geometrical effect in interfacial area transport is examined by the data acquired in vertical fir-water two-phase flow through round pipes of various sizes and a confined flow duct, and by those acquired In vertical co-current downward air-water two-phase flow through round pipes of two different sizes.

• 지구물리
• /
• 제9권3호
• /
• pp.181-188
• /
• 2006

The data, methodology, and the resulting accurate gravimetric geoid model for the Korean Peninsula (latitude from 32˚ N to 40˚ N and longitude from 124˚ E to 131˚ E) are presented in this study. The types of used data were a high degree geopotential model (the EGM96 spherical harmonic coefficient set), a set of 12,615 land gravity observations, 1,056,075 shipborne gravity observations, and KMS2002 gravity anomalies from satellite altimetry. The remove-restore technique was successfully applied to combining the above mentioned data sets using up to degree and order 112 of the EGM96 coefficient. The residual geoid was calculated with residual Free-Air anomaly values using the spherical Stokes' formula with a 37-km integration cap radius. The geoid model was referred to WGS84 geodetic system and was tested using a set of GPS/levelling geoid undulations. The absolute accuracy is 0.132 m and some improvement compared to the PNU95 geoid model was found.

• 설비공학논문집
• /
• 제3권2호
• /
• pp.142-151
• /
• 1991

In the present investigation, it has been proposed to utilize a direct contact heat exchanger as an evaporator to solve the difficulties such as scaling, corrosion and law thermal efficiencies, associated with the conventional evaporator. Liquified nitrozen was utilized as a working fluid to investigate basic natures of bubble dynamics in the evaporator, and spray nozzles were adopted to inject liquified nitrozen into the spray column with varying flow rates of dispersed phase fluids. Experimentations were carried out in the range of $6.54{\times}10^{-4}kg/s$ - 0.030 kg/s for dispersed phase flow rates with one, three and five nozzle holes. Observing the bubble dynamics for the evaporator the feasibility of utilizing a direct contact heat exchanger as a LNG evaporator has been evaluated. The results show that no eruption phenomena was observed in the present investigation with $LN_2$ and the interface between $N_2$ bubbles and water was fully turbulent. It is believed that the high injection velocity of $LN_2$ through the spray nozzles provide good mixing effects for both heat and mass transfers between water and $N_2$ bubbles. Ice was formed on the surface of the spray nozzle for higher $LN_2$ flow rates. However, even in this case, it is observed that the ice was detached as soon as it was formed. Under the present experimental conditions, the shapes of $LN_2$ bubbles were in the spherical-cap region according to the Clift, Grace and Weber Graphs. The height of foam region caused by the breakup of larger bubbles keeps increasing with high injection velocities until it reaches it's maximum height.

• 자원ㆍ환경경제연구
• /
• 제19권4호
• /
• pp.915-961
• /
• 2010

본 연구는 $SO_2$ 배출이 건강피해에 미치는 영향을 다양한 건강반응함수를 활용하여 분석하고, 배출총량제(cap)와 배출권거래제 하에서 $SO_2$의 배출효과를 살펴보았다. 보건관련 연구에 부합되는 건강반응함수의 기울기와 곡률을 이용하여 분석한 결과 배출총량제에서의 피해가 상대적으로 약 26백만 달러~452백만 달러 낮은 것으로 확인되었다. 배출권거래제 대비 배출총량제의 상대적 편익은 건강반응함수의 곡률에 따라 증가하나 기울기와는 반비례하는 것으로 나타났다. 여러 종류의 건강반응함수를 고려한다 하더라도 배출총량제가 배출권거래제보다 피해 측면에서 우월한 것으로 보인다. 한계피해함수의 기울기가 실제보다 더 가파를 때 총 피해 관련 배출권거래제의 상대적 편익이 커지게 된다. 추가적으로 배출저감비용, 소비자 및 생산자 잉여 등을 고려할 때 배출총량제가 약 37억~41억 달러 정도 후생효과가 더욱 높은 것으로 나타났다.

• 한국지반환경공학회 논문집
• /
• 제15권5호
• /
• pp.57-65
• /
• 2014

경제적, 기술적인 이유에서 실내시험을 위한 in situ 상태 그대로의 현장 모래 시료를 채취하는 것은 매우 어렵다. 따라서 현장과 유사한 상태의 시료 조성을 위한 다양한 시료 재성형 방법이 제시되었으며, 연구 목적에 따라 적합하다고 판단되는 시료성형방법이 다양하게 적용되고 있다. 본 논문에서는 모래의 시료 재성형 시 널리 이용되고 있는 습윤다짐법, 건조낙사법, 그리고 건조퇴적법을 적용하여 동일한 상대밀도로 시료를 조성한 후, 일정한 구속압 조건에서 압밀배수전단 시험을 수행하였다. 또한 자체제작을 통해 시료의 상 하부 캡에 압전소자를 설치하여 압밀 종료 시점과 전단과정에서의 탄성파 속도를 측정함으로써 시료 재성형 방법 및 상대밀도에 따른 오타와 모래에서의 거동 특성 및 전단거동 시의 탄성파 속도의 변화 경향을 분석하였다. 분석 결과, 시료 조성방법에 따라 전단과정에서 모래의 거동에는 차이가 발생할 수 있는 것으로 나타났으며, 전단과정 시 전단파 속도는 체적 변화양상과 동일한 경향을 보이는 것으로 나타났다.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2006년도 추계학술대회 및 정기총회
• /
• pp.24-28
• /
• 2006

Author have studies lichen flora of the most important ice-free areas of Continental Antarctic: Bunger Hills, and the vicinity of Prudz Bay (Larsemann Hills, and Radok Lake in Prince Charles Mountains). Totally 44 lichen species from 22 genera were reported for Bunger Hills and 50 lichen species from 22 genera and 10 families: Acarosporaceae, Lecanoraceae, Lecideaceae, Parmeliaceae, Pertusariaceae, Physciaceae, Rhizocarpaceae, Stereocaulaceae, Theloschistaceae, and Umbilicariaceaewere reported for the Prudz Bay Region. 20 lichen species were found in the region for the first time. Phytogeographic analysis indicated a relatively high proportion of species with bipolar distribution - about 50% of recorded lichen species. About 30% of lichens normally don't extend into maritime zone occurring in continental Antarctic only. The most common lichen families in the region are Buelliaceae, Lecanoraceae and Teloschistaceae. The water supply and not a temperature is the critical factor for lichens in the Continental Antarctic. Moisture appears to be supplied for lichens not only from snow-melt water but mainly from air. In Maritime Antarctic, due to high air humidity macrolichens form communities everywhere (Himantormia, Usnea and Umbilicaria). In oases of Continental Antarctic extensive sites are lacking in lichen cover, even if the ground is normally snow free. Lichens occur at humid sites with moisture which were brought by winds over the ice cap and poorly developed or absent in dry areas. Of particular significance for lichens are substrate characteristics, animals influence and salinity brought by wind in coastal areas. Most rich lichen vegetation developed in oases around nests of snow petrels, where the melt water is enriched by nutrients. In contrast, the most pure vegetation is on mobile sand and gravel and in salted coastal habitats.

• 지질공학
• /
• 제18권3호
• /
• pp.331-338
• /
• 2008

다양한 조건의 관정에 지하수를 채수할 수 있는 샘플러를 개발하고 평가하였다. 이 샘플러는 공압 튜브, 공압 실린더, 주사기 바늘 그리고 샘플병으로 구성되며, 공기압을 동력원으로 사용한다. 공압 실린더는 주사기 바늘을 샘플병의 고무마개에 관통시키는 기능을 담당하며, 샘플병 고무마개를 관통한 주사기 바늘은 샘플병으로의 지하수 유입 통로 역할을 담당한다. 샘플러 현장시험은 해수의 영향으로 수질이 주기적으로 변화하는 제주 한동지역의 해수침투 관측정을 대상으로 하였다. 샘플러의 내부와 외부에 CTD Diver를 장착하고 관정내 동일 심도에서의 샘플링을 여러 차례 반복하면서 샘플링 단계별 전기전도도와 압력 변화를 측정하였다. 시험 결과, 샘플러를 작동시킬 때에만 지하수가 샘플러로 유입되며, 샘플러 내부와 외부에서 측정한 지하수의 전기전도도와 압력은 거의 일치하는 것이 확인되었다. 이러한 결과는 이 연구에서 제시한 샘플러를 이용하여 채수한 지하수 시료들이 샘플러 설치 심도의 샘플링 시간대의 지하수 수질을 정확하게 반영하고 있음을 지시한다.

• 항공우주정책ㆍ법학회지
• /
• 제22권2호
• /
• pp.27-51
• /
• 2007

The cumulative result of the work by the ICAO Secretariat, the Secretariat Study Group and the Council Special Group on the Modernization of the Rome Convention of 1952 are two draft Conventions, namely: "Draft Convention on Compensation for Damage Caused by Aircraft to Third Parties, in case of Unlawful Interference", and "Draft Convention on Compensation for Damage Caused by Aircraft to Third Parties" The core provisions of the former draft Convention are as follows: The liability of the operator is strict, that is, without the necessity of proof of fault. It would be liable for damage sustained by third parties on condition only that the damage was caused by an aircraft in flight(Article 3). However, such liability is caped based on the weight of the aircraft(Article 4). It is envisaged to create an independent organization called the Supplementary Compensation Mechanism, with the principle purpose to pay compensation to persons suffering damage in the territory of a State Party, and to provide financial support(Article 8). Compensation shall be paid by the SCM to the extent that the total amount of damages exceeds the Article 4 limits(Article 19). The main issues on the farmer draft Convention are relating to breaking away from Montreal Convention 1999, no limits on individual claims but a global limitation on air carrier liability, insurance coverage, cap of operators' strict liability, and Supplementary Compensation Mechanism. The core provisions of the latter draft Convention are as follows: the liability of the operator is strict, up to a certain threshold tentatively set at 250,000 to 500,000 SDRs. Beyond that, the operator is liable for all damages unless it proves that such damage were not due to its negligence or that the damages were solely due to the negligence of another person(Article 3). The provisions relating to the SCM and compensation thereunder do not operate under this Convention, as the operator is potentially for the full amount of damages caused. The main issues on the latter draft Convention are relating to liability limit of operator, and definition of general risks. In conclusion, we urge ICAO to move forward expeditiously on the draft Convention to establish a third party liability and compensation system that can stand ready to protect both third party victims and the aviation industry before another 9/11-scale event occurs.

• 한국균학회지
• /
• 제3권1호
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.