• Corrosion Science and Technology
• /
• 제5권4호
• /
• pp.141-148
• /
• 2006

The chemical composition and the semiconducting properties of the passive films formed on Alloy 690 in various film formation conditions were investigated by XPS, photocurrent measurement, and Mott-Schottky analysis. The XPS and photocurrent spectra showed that the passive films formed on Alloy 690 in pH 8.5 buffer solution at ambient temperature, in air at $400^{\circ}C$, and in PWR condition comprise $Cr_2O_3$, $Cr(OH)_3$, ${\gamma}-Fe_2O_3$, NiO, and $Ni(OH)_2$. The thermally grown oxide in air and the passive film formed at high potential (0.3 $V_{SCE}$) in pH 8.5 buffer solution were highly Cr-enriched, whereas the films formed in PWR condition and that formed at low potential (-0.3 $V_{SCE}$) in pH 8.5 buffer solution showed relatively high Ni content and low Cr content. The Mott-Schottky plots exhibited n-type semiconductivity, inferring that the semiconducting properties of the passive films formed on Alloy 690 in various film formation conditions are dominated by Cr-substituted ${\gamma}-Fe_2O_3$. The donor density, i.e., concentration of oxygen vacancy, was measured to be $1.2{\times}10^{21}{\sim}4.6{\times}10^{21}cm^{-3}$ and lowered with increase in the Cr content in the passive film.

• 방사성폐기물학회지
• /
• 제13권2호
• /
• pp.99-112
• /
• 2015

본 연구에서는 고준위폐기물 처분시 완충재로 사용되는 벤토나이트의 열적 거동을 평가하기 위해 실내실험장치를 제작하였다. 그리고 실험 결과를 검증하기 위해 유한요소해석 프로그램인 ABAQUS를 이용한 열해석을 실시하였다. 그리고 실험기간 동안의 계절변화를 감안하여 외부대기 온도에 따른 벤토나이트의 열적거동을 평가하였다. 해석결과, 스테인리스스틸이 포함된 case3 해석모델의 결과가 실험결과와 1℃ 내외의 오차를 보이며 거의 일치함을 볼 수 있었다. 그리고 계절에 따른 벤토나이트 온도 해석을 수행한 결과, 시간에 따른 온도분포 경향이 일치함을 확인하였다. 이러한 열해석을 통해 완충재를 둘러싸고 있는 물질의 열전도도와 외부대기의 온도가 벤토나이트 완충재의 열적 거동에 큰 영향을 주는 요소임을 확인할 수 있었다. 향후 열원을 포함한 벤토나이트 완충재의 수분 포화 특성 실험이 실시 될 예정이므로, 실험에 대한 검증과 예측을 위해 보다 적합한 수치해석모델 개발에 대한 연구가 필요할 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.377-377
• /
• 2011

Organic solar cells (OSCs) with low cost have been studied to apply on flexible substrate by solution process in low temperature [1]. In previous researches, conventional organic solar cell was composed of metal oxide anode, buffer layer such as PEDOT:PSS, photoactive layer, and metal cathode with low work function. In this structure, indium tin oxide (ITO) and Al was generally used as metal oxide anode and metal cathode, respectively. However, they showed poor reliability, because PEDOT:PSS was sensitive to moisture and air, and the low work function metal cathode was easily oxidized to air, resulting in decreased efficiency in half per day [2]. Inverted organic solar cells (IOSCs) using high work function metal and buffer layer replacing the PEDOT:PSS have focused as a solution in conventional organic solar cell. On the contrary to conventional OSCs, ZnO and TiO2 are required to be used as a buffer layer, since the ITO in IOSC is used as cathode to collect electrons and block holes. The ZnO is expected to be excellent electron transport layer (ETL), because the ZnO has the advantages of high electron mobility, stability in air, easy fabrication at room temperature, and UV absorption. In this study, the IOSCs based on poly [N-900-hepta-decanyl-2,7-carbazole-alt-5,5-(40,70-di-2-thienyl-20,10,30-benzothiadiazole)] (PCDTBT) : [6,6]-phenyl C71 butyric acid methyl ester (PC70BM) were fabricated with the ZnO electron-transport layer and MoO3 hole-transport layer. Thickness of the ZnO for electron-transport layer was controlled by rotation speed in spin-coating. The PCDTBT and PC70BM were mixed with a ratio of 1:2 as an active layer. As a result, the highest efficiency of 2.53% was achieved.

• 한국버섯학회지
• /
• 제11권4호
• /
• pp.214-218
• /
• 2013

외부공기 유입방식에 따른 느타리버섯의 생육특성을 조사하기 위하여 3가지 처리구를 두어 실험한 결과 모든 처리구에서 재배기간 중 온도편차가 발생하였고, 처리구 모두 1, 2, 8월에 가장 높았으며, T2(열교환기)와 T3(기밀실)에서 T1(외부공기 직접유입) 보다 온도편차가 작은 경향이었다. 재배기간 중 냉방시간은 T1(외부공기 직접유입)은 1,090.3시간, T2(열교환기)는 661.1시간, T3(기밀실)은 865.0시간이었고, 평균 냉방절감율은 T1(외부공기 직접유입) 대비 T2(열교환기)는 21%, T3(기밀실)은 11%이었다. 재배기간 동안 난방기의 년중 가동시간은 T1(외부공기 직접유입)은 1,506.9시간, T2(열교환기)는 875.6시간, T3(기밀실)은 1,054.2시간으로 T2의 가동시간이 가장 작았고, 년중 평균 난방절감율은 T1(외부공기 직접유입) 대비 T2(열교환기)는 22%, T3(기밀실)은 16%이었다. 외부공기 유입방식에 따른 냉방정도(CD-H)는 T1(외부공기 직접유입)>T3(기밀실)>T2(열교환기)의 순이었고, 난방정도(HD-H)도 냉방정도(CD-H)의 경우와 동일하였다. 수량은 T2(열교환기)와 T3(기밀실)에서 T1(외부공기 직접유입) 보다 4, 9, 10월을 제외한 전 기간에서 높았다. 이와 같은 결과로 시설재배사에서 느타리버섯 병재배시 열교환기 또는 기밀실을 설치하여 재배할 경우 에너지를 절감할 수 있고, 수량 및 고품질의 느타리버섯을 수확할 수 있어 농가소득증대에 기여할 것으로 판단되었다.

• 한국산림과학회지
• /
• 제87권2호
• /
• pp.188-193
• /
• 1998

토양의 pH 변화는 토양의 화학적 특성을 결정하는 중요한 요인이며 도시의 환경오염이 토양과 식물생장에 미치는 영향을 평가할 수 있는 지표가 되기도 한다. 서울지역의 대기오염이 도시림 토양에 미치는 영향을 파악하기 위하여 조사지역을 도심에서 외곽방향으로 5km 간격의 동심원으로 구분하고 도시 외곽지역에서 토양산성화에 차이가 있는지 조사하였다. 각 구역의 도시림에서 토양시료를 A, B층에서 채취하여 토양 pH, 토양완충능력, 양이온치환능력 및 염기포화도를 측정하였다. 토양 pH는 A층에서 3.96~5.08, B층에서 4.10~5.25의 분포를 나타냈다. 도심에서 외곽방향으로 구역간 토양 pH 차이에는 통계적인 유의성이 없었으나 외곽 구역에 비하여 도심 구역에서 토양 pH가 비교적 낮은 경향을 보였다. 토양완충능력은 도심 구역 (0-5km와 5-10km)이 외곽 구역(10-15km와 15-20km)에 비하여 현저히 낮은 값을 나타내었다. 양이온치환능력과 이와 관련있는 염기포화도는 구역간 차이에 유의성이 없었다. 대기오염물질의 도시의 외곽 방향으로의 확산을 따라 서울지역 도시림의 토양 산성화가 유사한 진행을 보이고 있는 것으로 나타났다. 토양완충능력이 도심 구역에서 낮은 것은 서울지역에서 대기 중 산성강하물의 유입에 대하여 나타난 토양 반응의 척도로 볼 수 있다.

• 동력기계공학회지
• /
• 제10권4호
• /
• pp.165-171
• /
• 2006

An experiment to observe reduction of pressure fluctuation in the compressing system utilizing snubber has done. The experiment measured pressure at inlet and outlet of snubber. It used an air compressor as a model of hydrogen one. Snubber with buffer and snubber without buffer were used to get comprehensive comparison between both of that snubber. An analysis by using Fast Fourier Transform (FFT) method was conducted to verify working pressure frequency. With this method pure signal of static pressure was filtered from noisy signal. The experiment was run for several speeds of piston movement. It was controlled by adjustable frequency regulator that controled rotation of actuator motor. This was connected to the piston-reciprocating compressor with V-belt. From result obtained, the fluctuation was increasing proportionally when frequency of driver motor was increased.

• 한국환경복원기술학회지
• /
• 제6권3호
• /
• pp.17-28
• /
• 2003

The objective of this study is to review and verify whether the functions and effect of roadside trees generally known in theory are actually realized in urban roads and how well they are performed if the function and effect are really realized. The study was conducted with a focus on air purification effect of roadside trees. The m헤r study result is as follows. First, calculation of air purification effect of roadside trees showed that it is minimal. However, 7.4 units of broad-leaved trees is necessary in order to purify $SO_2$ discharged by one passenger car and 1,803.3 trees to purify $NO_2$. Second, regarding pollutant absorption capacity, air pollutant absorption capacity increased as the number of rows planted gets higher (i.e., 2-row plantation absorbs pollutant better than I-row plantation). In particular, "2-row plantation + lower-level shrub + buffer green belt" was as eight times high as "I-row plantation" in absorption capacity. Third, out of 30 roads with over 8 lanes in 15 cities, only 33.3% or a total of ten roads in seven cities had a median strip. Out of these ten roads, nine roads were planted in a double-layer consisting forest trees, shrubs, ground plants (grass). Analysis showed that out of six tree species planted along these roads, about a half of them were weak to air pollution. Also, based on the outcome of this study, charging a "plantation due" when people purchase a new car, improving layout of roadside trees, and reinforcing plantation of air purification tree species when selecting tree species for roadside trees were proposed.

• 한국가축번식학회지
• /
• 제22권3호
• /
• pp.253-264
• /
• 1998

Porcine follicular oocyte, collected from antral follicles (2~5 mm in diameter) of gilt ovaries were matured in vitro porcine follicular fluid (pFF) with PMSG (pFF-PMSG) buffer with at 37$^{\circ}C$ under 5% CO2 in air their ability of maturation promoting factor (MPF), of GV and GVBD formation was examined followed during time after in vitro culture. Formation of second metaphase was observed in 57.6% and 71.2% of matured in with pFF-PMSG buffer to 45 and 50 hours after invitro. Porcine oocytes cultured in pFF-PMSG for various periods of up to 30 hours were stained with Hoechst-33342 and classified according to maturation before assaying. Histone H1 kinase (H1K) activity was assayed during meiotic maturation in porcine oocytes matured in pFF-PMSG buffer in vitro. In oocytes matured in pFF-PMSG, H1K activity was at the 30 hours after culture and increased about 15 fold than at the germinal vesicle stage with before at the cultured in vitro. This pattern is similar to those reported in non-mammalian species and su, pp.rts the concepts that H1K is ubiquitous in eukaryotes and controls the meiotic cell cycle in mammals. These results suggest that the maturation pFF-PMSG buffer used influences the fluctuation pattern of H1K activity and biological characteristics of porcine oocytes cultured in vitro.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.852-855
• /
• 2003

Gas-Assisted Injection Molding(GAIM) process, that can be used to provide a hollow shape in a molding, is a variant of the conventional injection molding process. GAIM has many advantages such as reduction of material, sink mark. warpage. and lower injection pressure. Thus, GAIM has been widely applied in the industry to make moldings with a hollow channel such as handles, TV frames and so on. On the other hand, GAIM has some disadvantages such as slow cooling time and flow marks. In the disadvantages, hot gas core causes slow cooling of a molding and the overflow. which is to prevent flow mark. is waste of materials. To solve these problems, we developed a new GAIM system that we called RGIM(Reverse Gas Injection Molding). The RGIM has two special units; one is the overflow buffer, which is used for reduction of a material, and the other tile air unit, which is used for faster cooling of a molding. We conducted an experiment and simulation to verify the efficiency of the RGIM system. Through experiments and simulation, we confirmed the effectively operating of the RGIM system and extracted the optimum process conditions.

• Corrosion Science and Technology
• /
• 제2권5호
• /
• pp.212-218
• /
• 2003

Electronic properties of passive films formed on Ti at film formation potentials $(E_f)V_{SCE}$ in pH 8.5 buffer solution and in an artificial seawater were examined through the photocurrent measurement and Mott-Schottky analysis. The passive films formed on Ti in pH 8.5 buffer solution exhibited a n-type semiconductor with a band gap energys $(E_g);E_g^{n=2}=3.4$ eV for nondirect electron transition, and $E_g^{n=0.5}=3.7$ eV for direct electron transition. These band gap values were almost same as those for the passive films formed in artificial seawater, indicating that chloride ion ($Cl^-$ in solution did not affect the electronic structure of the passive film on Ti. $E_g$ for passive films formed on Ti were found to be greater than those ($E_g^{n=0.5}=3.1$ eV, $E_g^{n=2}=3.4$) for a thermal oxide film formed on Ti in air at $400^{\circ}C$. The disorder energy of passive film, determined from the absorption tail of photocurrent spectrum, was much greater than that for the thermal oxide film farmed on Ti in air at $400^{\circ}C$. The greater $E_g$ and the higher disorder energy for the passive film compared with those for the thermal oxide fIlm suggest that the passive film on Ti exhibited more disorded structure than the thermal oxide film. The donor density (about $2.4{\times}10^{20}cm^{-3}$) for the passive film formed in artificial seawater was greater than that (about $20{\times}10^{20}cm^{-3}$) formed in pH 8.5 buffer solution, indicating that $Cl^-$ increased the donor density for the passive film on Ti.