• 제목/요약/키워드: Air breakdown

검색결과 234건 처리시간 0.035초

Epidermal Growth Factor(EGF)와 Insulin-like Growth Factor-1(IGF-1)이 소 난포란의 체외성숙에 미치는 영향 (Effects of Epidermal Growth Factor (EGF) and Insulin-like Growth Factor-1 (IGF-1) on Maturation of Bovine Follicular Oocytes In Vitro)

  • 윤종택;정영호;한기영;최선호
    • 한국수정란이식학회지
    • /
    • 제13권3호
    • /
    • pp.245-249
    • /
    • 1998
  • 본 연구는 성장인자 EGF, IGF-1, EGF+IGF-1 이 소 난포란의 체외성숙에 미치는 영향을 규명하기 위하여 실시하였다. 소 난포란의 체외성숙 시 EGF를 농도별 (10, 50 및 100ng/m1)로 첨가하여 실험한 결과 통계학적 유의성은 인정되지 않았으나 24시간 배양 후 성숙율은 대조군에 비하여 높은 경향을 나타내었다. 소난포란의 체외성숙 시 EGF와 IGF-1을 병용 처리하여 실험한 결과, EGF 또는 IGF-1 단독처리 군에 비하여 병용처리군이 유의적으로 높은 체외성숙율을 나타내었다(p〈0.05). 따라서 소난포란의 체외성숙율은 EGF와 IGF-1에 의하여 영향을 받으며 특히 EGF와 IGF-1의 상호작용에 의하여 더 유효한 효과를 나타내는 것으로 사료된다.

  • PDF

Experimental Investigations on Upper Part Load Vortex Rope Pressure Fluctuations in Francis Turbine Draft Tube

  • Nicolet, Christophe;Zobeiri, Amirreza;Maruzewski, Pierre;Avellan, Francois
    • International Journal of Fluid Machinery and Systems
    • /
    • 제4권1호
    • /
    • pp.179-190
    • /
    • 2011
  • The swirling flow developing in Francis turbine draft tube under part load operation leads to pressure fluctuations usually in the range of 0.2 to 0.4 times the runner rotational frequency resulting from the so-called vortex breakdown. For low cavitation number, the flow features a cavitation vortex rope animated with precession motion. Under given conditions, these pressure fluctuations may lead to undesirable pressure fluctuations in the entire hydraulic system and also produce active power oscillations. For the upper part load range, between 0.7 and 0.85 times the best efficiency discharge, pressure fluctuations may appear in a higher frequency range of 2 to 4 times the runner rotational speed and feature modulations with vortex rope precession. It has been pointed out that for this particular operating point, the vortex rope features elliptical cross section and is animated of a self-rotation. This paper presents an experimental investigation focusing on this peculiar phenomenon, defined as the upper part load vortex rope. The experimental investigation is carried out on a high specific speed Francis turbine scale model installed on a test rig of the EPFL Laboratory for Hydraulic Machines. The selected operating point corresponds to a discharge of 0.83 times the best efficiency discharge. Observations of the cavitation vortex carried out with high speed camera have been recorded and synchronized with pressure fluctuations measurements at the draft tube cone. First, the vortex rope self rotation frequency is evidenced and the related frequency is deduced. Then, the influence of the sigma cavitation number on vortex rope shape and pressure fluctuations is presented. The waterfall diagram of the pressure fluctuations evidences resonance effects with the hydraulic circuit. The influence of outlet bubble cavitation and air injection is also investigated for low cavitation number. The time evolution of the vortex rope volume is compared with pressure fluctuations time evolution using image processing. Finally, the influence of the Froude number on the vortex rope shape and the associated pressure fluctuations is analyzed by varying the rotational speed.

전철 탑재용 피뢰기의 설계 및 성능평가 (Design and Performance Evaluation of Surge Arrester for Loading in Railway Rolling Stock)

  • 조한구;한세원;이운용;김석수;장태봉
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마
    • /
    • pp.74-77
    • /
    • 2000
  • The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for AC power system of railroad vehicles. Metal oxide surge arrester for most electric power system applications, electric train and must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of ZnO elements in a surge arrester occurs due to flashover, fault short current flows through the arrester and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock. pressure rise, etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion. The main research works are focused on the structure design by finite element method, pressure relief of module, and studies of performance of surge arrester for electric railway vehicle.

  • PDF

AF궤도회로의 전기적 구분 장치 설치이전에 따른 커패시터 보상으로 LC공진 주파수 대역의 전압특성 분석 (An Analysis of Voltage Characteristics for LC Resonant Frequency Band of Capacitor Compensation According to Moving of Electrical Separation Equipment of AF Track Circuit)

  • 원서연;최재식;박주훈;김희식
    • 전기학회논문지
    • /
    • 제65권8호
    • /
    • pp.1466-1477
    • /
    • 2016
  • This paper analyzes the electrical characteristic such as the impedance(Z), inductance(L), and cable resistance($R_p$) according to the change of cable length in order to move the electrical sorting device for distinguishing between AF non-insulated track circuits from the center of railway to outside railway. The simulation is performed to check the voltage difference between the voltage of sender and the voltage of receiver and determine the possibility of the voltage restoration availability in the frequency filter band through the capacitor compensation. It was applied to the results of the simulation to the sorting devices installed in the actual field. It is proved the availability by checking the measured voltage characteristic according to the capacitor compensating change of $10{\mu}F$ and $16{\mu}F$ before, and after the length of cable is increased with 6 meters. Through this, the prevention of breakdown and damage to facilities and the prevention the safety-related accidents of line workers from the train are expected according to moving the sorting devices of AR non-insulated track circuits to outside railway.

Defect Diagnosis of Cable Insulating Materials by Partial Discharge Statistical Analysis

  • Shin, Jong-Yeol;Park, Hee-Doo;Lee, Jong-Yong;Hong, Jin-Woong
    • Transactions on Electrical and Electronic Materials
    • /
    • 제11권1호
    • /
    • pp.42-47
    • /
    • 2010
  • Polymer insulating materials such as cross linked polyethylene (XLPE) are employed in electric cables used for extra high voltage. These materials can degrade due to chemical, mechanical and electric stress, possibly caused by voids, the presence of extrinsic materials and protrusions. Therefore, this study measured discharge patterns, discharge phase angle, quantity and occurrence frequency as well as changes in XLPE under different temperatures and applied voltages. To quantitatively analyze the irregular partial discharge patterns measured, the discharge patterns were examined using a statistical program. A three layer sample was fabricated, wherein the upper and lower layers were composed of non-void XLPE, while the middle layer was composed of an air void and copper particles. After heating to room temperature and $50^{\circ}C$ and $80^{\circ}C$ in silicone oil, partial discharge characteristics were studied by increasing the voltage from the inception voltage to the breakdown voltage. Partial discharge statistical analysis showed that when the K-means clustering was carried out at 9 kV to determine the void discharge characteristics, the amount discharged at low temperatures was small but when the temperature was increased to $80^{\circ}C$, the discharge amount increased to be 5.7 times more than that at room temperature because electric charge injection became easier. An analysis of the kurtosis and the skewness confirmed that positive and negative polarity had counterclockwise and clockwise clustering distribution, respectively. When 5 kV was applied to copper particles, the K-means was conducted as the temperature changed from $50^{\circ}C$ to $80^{\circ}C$. The amount of charge at a positive polarity increased 20.3% and the amount of charge at a negative polarity increased 54.9%. The clustering distribution of a positive polarity and negative polarity showed a straight line in the kurtosis and skewness analyses.

헬륨 가스 플로우와 가스 펄스 젯에서 할로겐족 원소들의 레이저유도 플라즈마 방출 스펙트럼 (Laser-induced plasma emission spectra of halogens in the helium gas flow and pulsed jet)

  • 이용훈;최대웅;공용득;남상호;나창운
    • 분석과학
    • /
    • 제26권4호
    • /
    • pp.235-244
    • /
    • 2013
  • 할로겐족 원소들의 강한 원자 방출선들은 진공자외선 영역에 존재하여, 공기 중에서 레이저 펄스를 시료에 집속하여 플라즈마 방출 스펙트럼을 얻어 원소 분석을 수행하기 매우 어렵다. 또한 근적외선 영역에 할로겐족 원소들의 들뜬 전자 상태들 사이의 전이에 의한 원자 방출선들이 존재하는데, 이들은 스타크 효과에 의한 선폭 넓어짐 현상이 매우 커서, 공기 중에서 원소 분석에 충분한 신호 대 잡음비를 얻기 어렵다. 헬륨 가스 플로우를 이용하여 근적외선 영역의 할로겐족 원소들의 원자 방출선들은 레이저유도 플라즈마로부터 관측하였다. 특히, 804.374 nm와 905.833 nm의 아이오딘 원자 방출선들은 레이저유도 플라즈마에서 처음으로 관찰된 것이다. 헬륨 분위기에서 스타크 효과에 의한 선폭 넓어짐 현상과 연속 배경복사의 세기는 현저히 억제되었다. 헬륨 가스 플로우의 유량에 따른 원자 방출선의 세기, 플라즈마 온도, 전자 밀도의 변화를 조사하였다. 이 방법을 이용하여 고무의 난연제 성분에 포함된 염소와 불소를 레이저유도 플라즈마 분광법을 이용하여 검출하였다. 마지막으로 레이저유도 플라즈마 분광법을 이용하여 할로젠 원소들을 검출하는데 헬륨 가스 소모량을 줄일 수 있는 가스 펄스 젯 장치를 제안한다.

Influence of climate conditions on yield, chemical component, color difference and starch characteristics of colored rice cultivars

  • Shin, Jong Hee;Kim, Sang Kuk;Kim, Se Jong
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.331-331
    • /
    • 2017
  • This study was conducted to know the influence of air temperature and sunshine duration on yield, chemical component, pigment color difference and starch characteristics of two colored rice cultivars in the plain area of Yeongnam province in Korea. The $L^*$, $a^*$, and $b^*$ value of brown rice in Hongjinju and Josaengheugchal rice cultivars was significantly different at continuous cultivated years, 2015 and 2016. The $L^*$, $b^*$ value of two colored rice was significantly increased in 2016 compared to 2015. The $a^*$ value of Josengheugchal rice cultivar was also significantly higher at 2016 than at 2015. It can be noticed the $a^*$, $b^*$, $L^*$ values in Josaengheugchal varied more than those in Hongjinju. Air temperature during ripening period in 2016 was higher than 2015, especially minimum temperature was too high to proper maturation for rice quality. In Josaengheugchal rice cultivar, sunshine duration after heading was longer in 2016 than in 2015. On the contrary, Hongjinju rice cultivar was ripened under condition of insufficient sunshine duration in 2016. The short growing duration by high temperature and long shiny duration made the lack of pigment for Josaengheugchal brown rice. In Hongjinju rice cultivar, shorten sunshine duration and higher night temperature were the source of the pigment deficiency. The grain size of rice which produced in 2016 was bigger than that of 2015 in both rice cultivars. The 1,000 grain weight of rice from 2016 was also bigger than that of 2015. Head rice ratio was high in the rice cultivars produced in 2015. Protein of milled rice in 2016 was more decreased than that of 2015 in Josaengheugchal rice cultivar, it showed reverse result in Hongjinju rice cultivar. Amylose contents of milled rice in 2016 were more decreased than that of 2015 in Hongjinju rice cultivar. Branch chain length distribution of amylopectin was shown a distinct difference between Josaengheugchal and Hongjinju rice flours by each produced year. Josaengheugchal rice cultivar produced in 2015 had a higher amount of short chains than that of 2016 rice starches. In Josaengheugchal rice cultivar, the pasting temperature and peak, trough, breakdown, final viscosity increased in rice flour which produced at 2016, whereas the setback viscosity and peak time showed lower value than those of rice from 2015. The most pasting properties (except of setback viscosity) of rice starch in Hongjinju rice cultivar grown in 2015 were higher than those of rice cultivar produced in 2016.

  • PDF

벼의 발아후(發芽後) 생육(生育), 세포형태(細胞形態) 및 근세포막(筋細胞膜) 투과성(透過性)에 미치는 BUTACHLOR 와 1,8-NAPHTHALIC ANHYDRIDE 의 영향(影響) (Butachlor and 1,8- Nphthalic Anhydride Effects on Post - Germination Growth, Anatomy and Root - Cell Membrane Permeability of Rice)

  • 전재철;황인택;한민숙
    • 한국잡초학회지
    • /
    • 제5권1호
    • /
    • pp.56-62
    • /
    • 1985
  • 벼의 발아후(發芽後) 생육(生育), 중경(中徑)과 근(根) 세포형태(細胞形態) 및 근(根) 세포막(細胞膜) 투과성(透過性)에 대한 butachlor와 1, 8 - naphthalic anhydride(NA)의 상호작용력(相互作用力)을 검토(檢討)하였다. Butachlor와 NA의 단일처리(單一處理)는 독도(獨度)의 증가(增加)와 함께 벼의 중경(中莖) 및 유근(幼根) 신장(伸長)을 현저히 억제(抑制)시키지만 엽초에 대해서는 영향(影響)을 미치지 않았다. Butachlor + NA 처리(處理)로 엽초 신장(伸長)을 증대(增大)되었지만 중경(中莖) 신장(伸長)은 감소(減少)되었다. Butachlor를 단일처리(單一處理)하면 중경(中莖) 근(根) 세포(細胞)의 피층세포(皮層細胞)가 부분적(部分的)으로 파괴된 세포간공극(細胞間空隙)이 형성(形成)되지만, NA를 동시(同時)에 처리(處理)하면 피층세포(皮層細胞)가 파괴된 세포간공극(細胞間空隙)은 더욱 확대(廓大)되었다. 벼의 근(根) 세포막(細胞膜) 투과성(透過性)은 butachlor와 NA의 처리농도(處理濃度) 증가(增加)로 확대(擴大)되지만, butachlor + NA의 처리(處理)로 감소(減少)되는 경향이었다.

  • PDF

건조방법과 감마선 조사에 따른 포도가공부산물의 색상 변화 및 항산화활성 (Effect of Drying Methods and Gamma Irradiation on the Color Changes and Antioxidant Activity of Grape By-Products)

  • 조지은;육홍선;김경희;백종연;문영자;박성진;장순애
    • 한국식품영양과학회지
    • /
    • 제39권12호
    • /
    • pp.1826-1831
    • /
    • 2010
  • 본 연구는 폐자원인 포도가공부산물을 활용한 기능성 소재 개발의 기초 자료 마련을 위해, 열풍 및 동결건조한 뒤 1~20 kGy의 감마선 조사를 실시한 포도가공 부산물의 품질 특성 및 항산화활성의 변화를 관찰하였다. 색도는 열풍건조 시료의 경우 3 kGy에서 가장 높은 L값과 a값을 나타낸 후 조사선량 증가에 따른 감소를 나타내었고, 동결건조시료의 경우 가장 높은 조사선량인 20 kGy에서 가장 높은 L값과 b값을 나타내어 열풍건조라는 고온의 전처리를 통한 색소의 파괴가 미리 진행되어 감마선 조사에 따른 영향을 나타내지 않았으며, 3 kGy의 감마선 조사는 열풍건조한 포도가공 부산물 시료의 색택에 좋은 영향을 미치는 것으로 나타났다. 총 페놀화합물의 함량을 측정한 결과, 열풍건조시료 메탄올 추출물에서는 3 kGy 조사구에서 가장 높은 함량을 나타내었고 조사선량 증가에 따른 감소를 나타내었으나, 비조사구보다는 조사구에서 더 높은 페놀화합물 함량을 나타냈다. 동결 건조시료 메탄올추출물의 경우, 비조사구에서 가장 높은 함량을 나타내었으나 조사구에서는 3 kGy 조사구가 가장 높은 페놀화합물 함량을 나타내었다. DPPH 및 ABTS를 이용한 라디칼 소거능의 측정 결과 역시 페놀화합물 함량의 측정 결과와 마찬가지로 열풍건조시료의 메탄올추출물에서 3kGy 조사구가 가장 높은 라디칼 소거능을 나타내었다. 환원력은 시료를 1~5 mg/mL의 농도로 희석하여 실험하였으며, 그 결과 열풍과 동결건조시료 모두 3 kGy 조사구에서 가장 높은 활성을 나타내었다. 따라서 본 연구를 통해 3 kGy의 감마선 조사는 포도 가공 부산물의 색택 및 항산화능을 향상시킴을 알 수 있었다. 하지만 가공부산물 활용의 측면에서 볼 때, 감마선 조사에 따른 포도부산물의 항산화 활성 증가는 미약하거나 없는 것으로 나타나 큰 의미를 갖지 못했다.

낙동강 삼각주 말단의 지형 변화 (Landform Changes of Terminal Area of the Nagdong River Delta, Korea)

  • 오건환
    • 한국제4기학회지
    • /
    • 제13권1호
    • /
    • pp.67-78
    • /
    • 1999
  • 낙동강 삼각주 말단은 하중도와 사주 그리고 간석지의 퇴적미지형으로 이루어져 있으며, 이들 미지형들은 해안선에 평행하게 바다쪽으로 향해 하중도군, 제1사주군, 제3사주군, 그리고 제4사주군의 순으로 배열되는 특징을 나타낸다. 하중도군은 을숙도-명호도-신호도로서 1916년 이전에 형성되었고, 제1사주군인 맹금머리등-대마등-진우도는 맹금머리등을 제외하면, 하중도군과 함께 1916년 이전에 출현된 사주들이다. 제2사주군인 백합등-장자도와 제3사주군인 나무싯등-새등은 각각 1970년과 1984년 이전에 형성되었으며 제4사주군인 다대등-도요등은 최근인 1990년 이후에 등장된 사주로서 현재 합성되어 있다. 이러한 사실은 삼각주 말단이 1987년 낙동강 하구둑 건설이후 빠르게 전진 발달하고 있다는 것을 의미하며, 이는 하구둑과 신호공단 및 명지주거지의 조성을 위한 하구 부근의 준설과 인공적인 수로의 변경에 따른 토사의 일시적 재퇴적현상에서 비롯된 것으로 보이며, 그 결과 연구지역의 미지형 변화는 삼각주 말단에서 일어나고 있는 낙동강의 유수와 파랑 그리고 연란류 및 조류의 에너지가 하구둑 건설 이전에 작용했던 것처럼 균형을 이룰 때까지 계속될 것으로 생각된다.

  • PDF