• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.34-45
• /
• 2016

Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.

• Journal of Applied Biological Chemistry
• /
• v.58 no.2
• /
• pp.131-137
• /
• 2015

Commercial greenhouse plant factories are highly efficient for controlling external factors such as floods, drought, insects, air pollution etc. However, they require substantial startup & maintenance investments and experimental research to optimize production. These facilities are especially useful for urban farming where high efficiency in small spaces is required. In this study, we investigated whether light emitting diode (LED) lights with mixed dominant wavelengths (650 nm : 550 nm : 445 nm=8:1:1, 650 nm : 445 nm=6:4) can increase the growth rate and bio-active compound content of carrots in comparison to that of fluorescent light (FL). LED with mixed wavelength (650 nm : 550 nm : 445 nm=8:1:1) increased the total weight and root circumference of carrots compared to FL. However, ${\beta}$-carotene contents were not significant in LED (650 nm : 550 nm : 445 nm=8:1:1). However, LED (650 nm : 445 nm=6:4) increased the ${\beta}$-carotene (FL: 7.27, LED: 10.48 mg/g ${\beta}$-carotene dried weight). These results suggested that using LED light at the ideal wavelength, at the antithesis color of the plant, might enhance plant growth and bio-active compound contents.

• Journal of Distribution Science
• /
• v.10 no.1
• /
• pp.43-52
• /
• 2012

With the slowdown in environmental issues and the change of environmental consciousness, ecotourism is being discussed in various social fields. Ecotourism is being popularized for environmental protection, and now it is becoming a mainstream product from one of mass tourism. Ecotourism's emphasis on sustainable development in the tourism destination's society, economy, and environment, through ecotourism study and education, enable people to understand the core value of the ecological environment. 2011 was nominated as "the Year of World Forest" by the UN. In the recent years, forests are becoming increasingly important with their own values and functions in environment, economy, society, and culture. In particular, the global environmental issues caused by climate change are becoming an international agenda. Forests are the only effective solution for the carbon dioxide that causes global warming. Moreover, forests constitute a major part of ecotourism, and are now most used by ecotourists. For example, Korea, wherein 60% of the land is forest, attracts ecotourists. With the increasing interests in environment, the number of tourists visiting the ecosystem forest, which is highly valued for its conservation, is increasing significantly every year and is receiving considerable attention from the government. However, poor facilities in the forest ecotourism sites and improper market strategies are the reasons for the poor running of these sites. Furthermore, tourists' environmental awareness affects ecology environmental pollution or the optimization of forest ecotourism. In order to verify the relationships among tourist attractiveness, environmental consciousness, charm degrees of the attractions, and attitudes after tours, we established some scales based on existing research achievement. Then, using these scales, the researcher completed the questionnaire survey. From December 20, 2010 to February 20, 2011, after conducting surveys for 12 weeks, we finally obtained 582 valid questionnaires, from a total of 700 questionnaires, that could be used in statistical analysis. First, for the method of research and analysis, the researcher initially applied the Cronbach's (Alpha) for verifying the reliability, and subsequently applied the Exploratory factor analysis for verifying the validity. Second, in order to analyze the demographics, the researcher makes use of the Frequency analysis for the AMOS, measurement model, structural equation model computing, and also utilizes construct validity, convergent validity, discriminant validity, and nomological validity. Third, for the analysis of the ecotourists' environmental consciousness, impacts on tourist attractiveness, charm degrees of the attractions, and attitudes after the tour, the researcher uses AMOS 19, with the path analysis and equation of structure. After the research, researchers found that high awareness of natural protection lead to high tourist motivation and satisfaction and more positive attitude after the tour. Moreover, this research shows the psychological and behavioral reactions of the ecotourists to the ecotourist development. Accordingly, environmental consciousness does not affect the tourist attractiveness that has been interpreted as significant. Furthermore, people should focus on the change of natural protection consciousness and psychological reaction of ecotourists while ensuring the sustainable development of ecotourists and developing some ecotourist programs.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.47-55
• /
• 2005

Roads deeply affect the life of people and keep doing an important role to support economic growth of a country. According to the budget plan of the ministry of construction and transportation of Korea, 8.1 trillion won have been allotted for road investment in the year of 2002 which occupy 61% of the transportation infrastructure special account (13.3 trillion won) and 4.7% of the total national budget (1,740 trillion won). It is true that services generated from road investment such as mobility enhancement and increased accessibility have shown positive effects through shortened travel time and decreased vehicle operating cost. However, it is also notable that many negative effects are gradually being discussed and those are nowadays getting severer due to enhanced people interests about road construction, increased concerns on environment and active public involvement that were evoked by traffic accidents, air pollution & noise and destruction of environment. Road construction processes in Korea are normally governed by administrative sectors (suppliers) not by users. These processes ate very weak to accomodate user s needs and community concerns thus easy to fail finalizing a road project without hassles. A public hearing process is supposed to be held in the processes of detailed design step and the environmental impact analysis. However, it is not enough to grab user's needs and community concerns. Increased public involvement frequencies, optimized public involvement timing and enhanced depth of public involvement magnitude are suggested to improve the current poor public involvement schemes in road planning and design processes. The application of these recommended methods to the road planning and design processes may guarantee the change from the current supplier-oriented schemes to the new user-oriented one. Also, this study suggests to reset objectivity and clarity of road construction process, to make conciliation guidelines based on many practical cases that produced good results, to introduce public involvement techniques in a stepwise basis, and to foster the professionals via education and training programs.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.3
• /
• pp.249-257
• /
• 2009

Surface runoff and erosion are responsible for extensive losses of top soil and agricultural productivity. In this study, a laboratory experiment was conducted to investigate the effects of different polyacrylamides (PAM) on the protection of soil from erosion and turbidity in loamy sand soil. To accomplish this, 10 and 40 kg $ha^{-1}$ of PAM were applied to the soil surface. The effects of rainfall on 10 and 20% slopes were then evaluated in the laboratory using a rainfall simulator. After air drying, the surface was subjected to rain at 30 mm $hr^{-1}$. The silt+clay of the runoff from samples treated with 10 kg PAM $ha^{-1}$ reduced by 43% and 13% when the 10% and 20% slopes were evaluated, respectively, when compared with the tap water without PAM treatment as control. The mean contents of silt+clay were reduced as the amount of PAMs applied increased at both slopes. Specifically, samples treated with 40 kg PAM $ha^{-1}$ showed reductions in the silt+clay of the runoff to 88% and 85% when the 10% and 20% slopes were evaluated, respectively, when compared to control. Furthermore, the mean turbidity of runoff in the 40 kg PAM $ha^{-1}$ treatment was reduced to 94.7% and 84.8% when the samples were subjected to 10% and 20% slopes, respectively, when compared to the control. Taken together, these findings indicate that PAM treatment will improve water pollution and agricultural productivity on sloped land via a reduction in soil erosion.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.333-344
• /
• 2011

Cleaning of foreign matter and corrosion products on surface among conservation treatment of iron artifacts is an important part for looking up a original form. The sand blaster is the most popular equipment when it removes the foreign matter and corrosion products on iron artifacts surface. Current foreign matter and corrosion products equipment, which mostly uses, is sand blaster. Glass dust which sprayed from sand blaster is harmful and causing environmental pollution. In order to solve these problems, we investigated the $CO_2$ snow cleaning that use a eco-friendly equipment to apply for cleaning foreign matter and corrosion products on surface of iron artifacts. It examined by using sand blaster and $CO_2$ snow cleaning to aged steel coupon and iron artifacts. In case of aged steel coupon, the result showed that the sand blaster and $CO_2$ snow cleaning methods were similar to the degrees of cleaning foreign matter and corrosion products, through surface roughness, color measurement and SEM. $CO_2$ snow cleaning applied to aged steel coupons weren't worn out the surface in comparison with sand blaster by SEM. When applied to the iron artifacts, power nozzle of the $CO_2$ snow cleaning was an excellent cleaning effect that surface wern't worn out in comparison with sand blaster. And, it showed that internal structure change of metal was no found before and after cleaning by X-ray radiography. Consequently, we confirmed that cleaning of the sand blaster and power nozzle of $CO_2$ snow cleaning were similar to the effect. But, it's very careful to use this method because of high outlet pressure of power nozzle for applying to the iron artifacts. As a result of experiments, it could be found that the cleaning methods should be selected depending on internal state of the artifacts.

• The Korean Journal of Malacology
• /
• v.29 no.1
• /
• pp.51-63
• /
• 2013

To assess the effect of environmental factors on the sustainability of cultured production shellfish, we investigated the habitat characteristics of tidal flat (Namhae-po in Taean). We measured the physiochemical parameters (temperature, salanity, pH, dissolved oxygen and nutrients) and the geochemical characteristics (chemical oxygen demand, ignition loss, C/N ratio and C/S ratio). Surface sediments were collected from several site of tidal flat to examine the geochemical characteristics of both the benthic environment and heavy metal pollution. The grain size for research area of tidal flat were similar at the ratio of silt and clay in comparison with the other site of it. The C/N ratio was more than 5.0, reflecting the range arising from the mix of marine organism and organic matter. The C/S ratio (about 2.8) showed that survey area had anoxic or sub-anoxic bottom conditions. The enrichment factor (Ef) and index of accumulation rate (Igeo) of the metals showed that those research areas can be classified as heavily polluted, heavily to moderately polluted, or more or less unpolluted, respectively. Adult surf clam (Mactra veneriformis) density was highest at St. 2 (middle part of the Namhae-po), on the other hand, surf clam spat density was highest at St. 3 (lower part of the Namhae-po). Heavy rain, terrigenous suspended clay with fresh water from neighboring agricultural land, and severe high air temperature during summer could be thought as detrimental causes of spat and adult mortality in Namhae-po tidal flat. We suggested that the growth of shellfish in the tidal flat was effected by the various environmental conditions, so an improvement in the cultured method was needed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.275-281
• /
• 2018

It is known that he pollutant emitted from the combustion process of marine fuel oil causes air pollution and harmful effects to the human body. Accordingly, IMO regulates pollutants emitted from ships. However, the regulation of Particulate Matter (PM) is still in the process of debate, so preemptive action is needed. Fundamental research on PM is essential. In this study, the Dimensionless Light Extinction Constant ($K_e$) of fuel oil used in marine diesel engines was measured and analyzed to construct the basic data of the PM generated from marine-based fuel oil. The fuel oil used in the land diesel engine was measured in the same way for character comparison. Both fuel oils differ in sulfur content and density. The $K_e$ was measured via the optical method using a 633 nm laser and was determined by using the volume fraction of PM collected by the gravimetric filter method. The $K_e$ of the PM discharged from marine fuel oil is 8.28, and the land fuel oil is 8.44. The $K_e$ of two fuel oils was similar within the measurement uncertainty range. However, it was found by comparison with the value obtained by the Rayleigh-Limit solution that the light scattering portion could be large. Also, it was found that light extinction characteristics could be different due to the relationship between light transmittance and collected mass.

• Korean journal of applied entomology
• /
• v.46 no.3
• /
• pp.363-373
• /
• 2007

To evaluate environment of farm lands using indicator insects and evaluation indices, the insect abundance of which is one of the major criteria for the evaluation of agricultural environment of farm land in urban areas and industrial complex, three sites (Ansan, Daesan, Suncheon) were designated and monitored from 2004 to 2006. The flora of agricultural land was more than urban areas and industrial complex of that in three sites. Soil, water and air pollution of urban areas and industrial complex were more serious than those of agricultural land in three sites. Overall population of insects were high from June to August in the surveyed three sites. Collected insects in agricultural land were 12 order, 106 family and 166 species, those in urban areas were 11 order, 102 family and 148 species, and in industrial complex were 11 order, 100 family and 152 species. Species and population belonging to Coleoptera was dominant in the surveyed sites. The insect diversity indices of farm land were 2.36 in agricultural land, 1.92 urban areas and industrial complex. And agricultural environment of agricultural land was good, urban areas was common and industrial complex was poor. Based on the major criteria of evaluation items, the criteria were selected as diversity index over 2.1, insect indicator Pheropsophus javanus in agricultural land, diversity index 1.5-2.0, insect indicator Nephotettix cincticeps in urban areas, diversity index below 1.5, insect indicator Pagria signata in industrial complex.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1977.06a
• /
• pp.6.2-7
• /
• 1977

Hoarseness, caused by any condition that interfers with normal phonatory function of larynx, is the most important symtom of the laryngeal disease. The air pollution is the serious social problom today due to irritation of the respiratory mucosa and secondary respiratory disease. It is significant to study whether, in resent years, the patients with complant of hoarseness has being increased or decreased, compare to past years. The authors report a statistical analysis on 400 cases with chief complain of horseness at the Department of Otolaryngology, Hanil Hospital during past 7 years from Jan. I, 1970 to Dec. 31, 1976. The results were as follows; 1) Among total out patients of 14, 731 who visited to the department of otolaryngology, the patients with hoarseness numbered to 400(2.7%). 2) Among total of 400 cases, male were 211 and female were 189. The incidence was slightly higher in male than female with ratio 1.1 to 1 in sex distribution. 3) The uderlying diseases causing hoarseness in order of frequency were Acute Laryngitis (158 cases, 39.5%), Chronic Laryngitis (103 cases, 27.3 %), Vccal Nodule (37 cases, 9.3%), Vocal cord paralysis (34 cases, 8.5%), Laryngeal Polyp (32 cases, 8%), Laryngeal Ca. (13 cases, 3.5%), and Laryngeal Tbc. (9 cases, 2.3%). Particulary, Laryngeal Ca., Laryngeal polyp and Laryngeal Papilloma were extremely high in male but the remainings were equally distributed in sex group distribution. 4) The highest incidence occurred in 3rd decade (113 cases, 28.5%), the next 4th and 2nd decade in the age group distribution. Acute and Chronic Laryngitis were widely distributed in age group distribution but the highest incidence was noted between 3rd and 4th decade (145 cases, 55.5%). The highest incidence was 3rd decade in Laryngeal polyp, 3rd and 4th decade in Vocal Nodule, 4th and 5th decade in Laryngeal Tbc. and Vocal cord paralysis and 5th decade in Laryngeal Ca. 5) The underlying disease causing hoarsness were evenly occurred in monthly distribution but relatively high incidence was observed between April and June (35.5%) compared to winter. 6) In durational distribution, the highest incidence was within 10 days (26%) from onset to consultation. 317 cases (80%) were visited to the clinic within 1 year.