• 한국해안·해양공학회논문집
• /
• 제23권2호
• /
• pp.139-146
• /
• 2011

충격쇄파압은 권파성 파랑이 구조물 전면에 갑자기 충돌할 때 발생하며 접촉면에서 공기포켓의 생성여부에 따라 충격쇄파압의 작용특성이 달라진다. 수괴의 직접적인 충돌에 따른 Wagner형은 접촉면에서 단일 압력 첨두치를 보이는 반면, Bagnold형은 공기포켓의 진동에 의하여 비접촉면에서도 압력의 첨두치를 보이는 특성이 있다. 본 연구에서는 시공 중의 수중터널 벌크헤드의 배면(육측면)에 발생하는 충격쇄파압을 고찰하였다. Navier-Stokes 방정식을 직접 푸는 수치해석을 적용하여 벌크헤드 인근에 발생하는 쇄파를 모의한 결과, 벌크헤드의 배면에서 강한 Bagnold형 충격쇄파압이 발생함을 확인하였다. 본 충격쇄파압의 존재는 동일 조건에 대하여 수행한 수리모형실험에 의해서도 확인되었으며, 실험결과와 수치해석결과가 대체적으로 유사한 성향을 보임을 확인하였다.

• 대한약리학회지
• /
• 제1권1호
• /
• pp.47-52
• /
• 1965

There are several methods used for screening and evaluating anti -inflammatory agents. Among these, 'Granuloma pouch' technic introduced by Hans Selye is considered as a simple and reliable method. The procedure of 'Granuloma pouch' technic is as follows: Rats were used as experimental animals. An air pocket was produced in the subcutaneous tissue of the mid-dorsal portion between the shoulders by the injection of 25ml of the air which was immediately followed by injection of 1 ml of 1% croton oil as irritant. Inflammatory exudate accumulated in the pouch during the succeeding 14 days. After sacrificing the rats on the last day of the experiment, the amount of the exudate in the pouch and the weight of the granuloma tissue was measured. The author observed and compared the anti-inflammatory activities of the several steroid compounds when they are given by different methods. 1. In the control rats, the amount of inflammatory fluid and the weight of the granuloma tissue after 14 days were 9ml and 3gm respectively. 2. Injection of hydrocortisone 1.5mg subcutanenusly, 24 hours prior to pouch formation into the area where the pouch is to be formed, successfully prevented the inflammatory processes. 3. Injection of hydrocortisone 1.5mg in the air pocket formed 24 hours prior to croton oil injection was ineffective. 4. Injection of hydrocortisone into the pouch at a distance of 5mm apart from the pouch formation did not prevent the development of inflammation. 5. Anti-inflammatory activities of hydrocortisone administered systematically(injected intramuscularly into the area which is not related to the area of pouch formation) for 10 days were proportional to the doses of hydrocortisone administered. 6. DOCA, testosterone, and progesterone did not show the anti-inflammatory activity.

• 한국조경학회지
• /
• 제50권6호
• /
• pp.1-14
• /
• 2022

본 연구는 도시화 과정에서 발생한 도시 열섬현상을 완화하기 위해 도시 내에서 시행할 수 있는 생활권 녹지 조성 방법인 근린공원 조성, 소공원 조성, 주차장 녹화, 가로수 식재, 옥상·벽면 녹화 다섯 가지의 유형에 대해 세부 녹화 시나리오를 설정하여 열환경 개선 효과를 정량적으로 분석하는 것을 목표로 한다. 열환경 개선 효과를 확인하기 위해 미기후 시뮬레이션 프로그램인 ENVI-met 4.4.6v 모델을 활용하였다. 분석 결과, 공원의 식재 밀도가 높아질수록 기온이 낮아졌으나 사람이 느끼는 온열 체감 정도인 열쾌적성 지수 PET는 기온과 정비례하지 않았다. 수목이 증가하며 기온은 감소하였으나 상대습도가 소폭 증가 및 풍속이 다소 감소하였으며, 특히 PET에 많은 영향을 미치는 평균 복사온도가 수목 밀도와 정비례하지 않아 PET 역시 기온과 다른 양상을 보였다. 소공원은 한 개소 조성 후 효과를 확인하였을 때 최대 56m 반경까지 기온 저감 영향을 주었고, 250m 간격으로 세 개소를 추가 조성한 경우 기온 저감 범위가 약 12.5% 증가하였다. 기온과 달리 PET는 식재된 수목 영역 인근만 영향을 미쳐 소공원 조성 후 주변 환경의 열쾌적성은 큰 차이를 보이지 않았다. 지표면 포장을 아스팔트에서 잔디블록으로 변경하거나 옥상 및 벽면녹화 시행 등은 직접적인 일사 차양의 역할을 하지 않으나 기온 저감에 긍정적인 효과를 주었고, PET는 세 유형 모두 조성 전후 유의미한 차이를 보이지 않았다. 가로수는 식재 간격이 좁을수록 더 높은 기온 저감 효과를 보였으나, PET는 수목 밀도와 정비례하지 않았다. 가로수 하부 관목 식재의 경우 기온 저감에는 큰 영향을 주지 않으나 열쾌적성 개선에는 긍정적인 영향을 주었다. 본 연구는 도시 열섬현상 해소를 위한 생활권 녹지 조성 전략을 개괄적으로 제시하고 효율적인 열환경 개선을 위한 세부 전략을 수립하는 데에 활용될 수 있을 것으로 판단된다.

• 한국건축시공학회지
• /
• 제2권1호
• /
• pp.139-146
• /
• 2002

This study deals with the characterizing and the application like as insulation materials in the joint part in concrete surface layer and waterproofing sheet especially for roof slabs. Using steel materials and butil-rubber tape to band waterproofing sheet and concrete surface together before this waterproofing system will be applied. It can be expected to both the curability and the watertightness by coating poly-urethane 2 or 3 times with sheet surface. Therefore this waterproofing system can be possible to protect water without the damage when vapor is going out from concrete and without air pockets because of the difference temperature inside and out. This system particularly consists of air bents and elastic waterproofing sheet considering the physical damage while water can cause purely physical damage. This system is one of the most efficient ways of waterproofing system without air pocket.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 추계학술대회 논문집
• /
• pp.261-262
• /
• 2000

항공기나 발전용 가스터빈(gas turbine) 및 대용량 압축기(compressor) 등과 같이 흡입공기의 유량이 매우 클 경우, 유입되는 공기 내부에 함유된 입자상 오염물질은 터빈의 기계적 성능에 큰 장애를 일으킬 수 있다(Klink and Schroth, 1996, Schroth, 1993). 이러한 입자상 오염물질을 효과적으로 제어하기 위해서는 처리기체의 유입구 부분에 대형 공기 정화용 여과시스템이 요구되며, 일반적으로 카트리지형 에어 필터(cartridge air filter)나 포켓형(pocket), 카세트형(cassette) 에어 필터가 적용 현장의 조건에 따라 사용된다. (중략)

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1294-1301
• /
• 2001

In order to reduce the time and cost for assembly, automobile speaker grills have been injection molded with door trims or map pockets in one piece recently. However, several defects such as short shots or air traps can easily occur due to the decreased fluidity of the melting polymer according to the excessive heat transfer to the mold. Therefore, it is necessary to optimize the resin feed system and predict possible defects by CAE analysis. However it is not possible to obtain exact analysis results for the speaker grill by using general shell elements since the heat transfer in the thickness direction which is the dominant factor of the filling stage can not be considered. Therefore, there have been several efforts to simulate the injection molding nature of the speaker grill by using shell elements with an effective thickness which is smaller than the actual thickness of the part. Two empirical values have been recommended for the effective thickness in real practice. One is 50∼70% of the thickness of the speaker grill and another is the gap distance between the adjacent holes. In this paper, CAE analyses of a map pocket with a speaker grill were conducted using shell elements with both of these recommended effective thicknesses, and the predicted flow fronts were compared with the findings from injection molding experiments. The commercial code MOLDFLOW was used for injection molding analysis and an 850 ton injection molding machine was used for experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.835-838
• /
• 2002

An experiment has been performed using a facility, which simulates the safety depressurization system (SDS) and in-containment refueling water storage tank (IRWST) of APR1400, an advanced PWR being developed in Korea, to investigate the dynamic load resulting from the blowdown of steam from a steam generator through a sparser. The influence of the key parameters, such as air mass, steam pressure, submergence, valve opening time, and pool temperature, on frequency and peak toads was investigated. The blowdown phenomenon was analyzed to find out the real cause of the initiation of bubble oscillation and discrepancy in frequencies between the experiment and calculation by conventional equation for bubble oscillation. The cause of significant damping was discussed and is presumed to be the highly tortuous flow path around bubble. The Rayleigh-Plesset equation, which is modified by introducing method of image, reasonably reproduces the bubble oscillation in a confined tank. Right after the completion of air discharge the steam discharge immediately follows and it condenses abruptly to provide low-pressure pocket. It may contribute to the negative maximum being greater than positive maximum. The subsequently discharging steam does not play as at the driving force anymore.

• 한국산업융합학회 논문집
• /
• 제21권1호
• /
• pp.1-8
• /
• 2018

The purpose of this study is to develop a high-strength, high-toughness, thin-walled aluminum shock absorber housing product by applying a high vacuum die casting method to improve internal gas defect and formability. The analysis program dedicated for the casting was used because it was too costly and time-consuming to adopt the gating system design. The final casting plan was designed based on the flow pattern of the material filled into the mold and the result of air pressure and air pocket after the material was completely filled in the mold. Gaty shape was designed as a split type. The runner was designed to have the same shape as the initial inlet curve of the cavity, and the flow of the molten metal was prevented from turbulent flow. The most favorable results were obtained when the injection speed was $V_2=4.0m/s$. Defects on pores were reduced by applying high vacuum level inside the mold.

• 한국조경학회지
• /
• 제40권1호
• /
• pp.12-22
• /
• 2012

최근 들어 서울시를 비롯한 대도시에 건립되는 초고층건물은 주변 공기의 대류를 변화시켜 난류현상을 유발하여 빌딩바람과 도시열섬 및 대기오염 물질 집적 등 주변 환경에 영향을 미치고 있다. 그 중에서도 고층건물의 주변지역의 기온의 공간적 변화는 환경 경사가 심한 것으로 판단된다. 이에 본 연구에서는 서울시 강남구의 초고층건물 지역과 인접 지역의 기온차이를 파악하고자 2008년 3월 16일부터 2009년 3월 15일까지 고정관측과 이동관측을 수행하였다. 타워팰리스(TPL)와 숙명여고(SMG)의 거리는 불과 200m이지만 두 관측지점의 연평균 기온차는 $0.7^{\circ}C$로 관측되었고, TPL의 열대야 일수는 13일, SMG는 5일이었다. TPL의 기온이 다른 곳보다 높은 것은 고층건물에 의한 도로협곡으로 인해 sky view factor가 현저히 낮아 장파복사의 대기 중 방출이 억죄되 도시열섬현상을 가중시키고 냉난방의 단위면적 당 전력 수요가 높아, 이로 인한 인공폐열이 도로협곡에 갇혀 고층건물 지역인 TPL의 열섬현상이 인접 지역보다 높은 것으로 관측되었다.

• 한국의류산업학회지
• /
• 제15권1호
• /
• pp.1-11
• /
• 2013

This study analyzed the expressive characteristics of padding in contemporary fashion. The methodology of this study was quantified through documentaries, fashion collections, and internet news. The results of expressive characteristics and methods were as follow. First, variability showed the creation of dwelling space by air filling, detail mode by zipper, and diversity of recycled filling by zipper pocket. It reflected the pursuit of nomadism and subversion of permanence by change of filling. Second, it was sexual symbolicity that showed the blurred androgynous silhouette by air filling and padding bar design of the chest, stomach, shoulder for the male body silhouette. It emphasized male sexual identity and power through the expression of a modern ideal body. Third, decoration displayed various crafts (such as knitting), various fabric such as polapolis, suedette, corduroy, denim, leather, knit, and spangle. It reflected visual pleasure, scarcity and various interpretations. Fourth, playfulness character forms throug hair filling, unfamiliar fashion items, diversity of silhouette and change of uses. It reflected a pleasant feeling through astonishment and surprise, nostalgia involved in memory and childhood play and disembarrassment from reality. Fifth, simplicity showed the elimination of a sportswear's factor with regular wad quilting, elimination of wad quilting, wad quilting following the structural line of clothes and the structual line of clothes omitted. It reflected disembarrassment from stereotype and an emphasis on essential elements.