• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.1-12
• /
• 2006

In this study, CFD computer simulations by FDS are carried out in order to confirm the performance of the combined operation of both sprinkler system and smoke curtain of 0.54 m depth installed for cooling and blocking the smoke which propagates beneath the sloped ceiling of a stairway corridor of which dimensions are 17.92 m long, 4.00 m wide, and 6.12 m high. It is shown that the response time of sprinklers decreases with fire size and it increases more about 1.1 second in case without smoke curtain than in case with smoke curtain, that the time of smoke transport from the fire source to the stairway outlet decreases considerably with fire size, and that the delay effect of smoke transport is not related to the sprinkler system, whether it is operated or not. This study shows that the combined operation of both sprinkler system and smoke curtain is very effective in smoke cooling, but it is a little for effect on smoke blockage. Although the hazard of skin burn due to radiative heat flux from hot smoke layer is decreased by spray cooling effect, the hazard of smoke suffocation and the weakening of visibility is increased by smoke downdrag and the turbulence of smoke-air mixing due to water spray. These conditions may result in preventing occupants from going out of the stairway during evacuation.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.49-55
• /
• 2009

Our domestic economy has been developed very rapidly after 1960's. Also, it is dramatically increasing traffic on road and surround environmental issues. Especially, rapid economic growth has been induced large construction of pavement, and bigger and higher traffic for transportation. These are making air pollution, traffic noise and vibration. The social requirement against the revealed road environment and traffic sound reduction is being demanded. Traffic noise of city zone is showed over the environmental specification more than 57%. In order to overcome these situations, the social attention is being increased. The quiet pavement is the same format of permeable pavement, but is not same for functional performance. In this research, it has been carried out to evaluate the fundamental-mechanical properties of hot mix asphalt for quiet pavement. Especially, couple of laboratory tests are conducted like marshall stability, resilient modulus, indirect tensile test, and compaction energy analysis with gyratory compaction curve. Also, two-layer pavement system has been adopted for developing of quiet pavement. The basic performance of hot mix asphalt of quiet pavement show a satisfaction of specification of hot mix asphalt.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.21-25
• /
• 2009

The results of a recent case study for material characterizations and structural evaluation to design asphalt overlay thickness of William P Hobby airport in Houston, Texas are presented herein. The existing runway 12R-30L of Hobby airport consisted of thick asphalt overlay over Portland Cement Concrete (PCC) and the localized surface shoving as evident in the closure of surface groove has been observed recently. Using the field cored asphalt concrete mixtures, measurements of percent air voids, asphalt content and aggregate gradation were conducted to find out the causations of surface shoving and groove closure. The FAA layered elastic program, LEDFAA was utilized to evaluate pavement structural conditions for new asphalt overlay. Two different composition assumptions for existing pavement were made to evaluate the pavement as followings: 1) APC, Asphalt Concrete Overlay over PCC pavement and 2) AC, Asphalt Concrete pavement. Based on laboratory testing results, a ratio of percent passing #200 to asphalt content ranged 1.1 to 2.2, which is considered a high ratio and a tendency of tender mix design was observed. Thus, the localized surface shoving and groove closure of the runway 12R-30L could be attributed to the use of excessive fine contents and tender mix design. Based on the structural evaluation results, it was ascertained that the analysis assuming the pavement structure as AC pavement gives more realistic structural life when the asphalt overlay is thicker enough compared to PCC layer because the existing PCC pavement under asphalt overlay acts more like a high quality base material.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.114-120
• /
• 1998

The spawning behavior, development of eggs and larvae of the Korea freshwater goby, Rhinogobius brunneus (Temminck et Schlegel) were studied. The eggs were spawned as a one-layer mass, hanging from the underside of a small pebble, and guarded by one male. The eggs were elliptic, about 1.48 mm in length and 0.65 mm in breadth, with a round top and a somewhat flat base with glutinous fibers. Hatching in the indoor tank with $17.0^{\circ}C$ in mean water temperature started from the 146 hours after fertilization. In the late developing stages, the embryo moved and freely changed its head to face the free tip of the chorion (normal egg) or to the basal end with a boundle of adhesive filaments (agrippa egg). Newly-hatched larvae were $3.10\~3.30$ mm in total length (mean: 3.22 mm), and mouth and anus were not yet open. Melanophores were present on the air- bladder, around the anus, and on the ventral part of the caudal region. The larva $3\~4$ days old transformed to postlarval stage, and they were $3.30\~3.85$ mm in total length (mean: 3.60 mm). As yolk sac and oil globules werw nearly absorbed, mouth and anus were open, and they fed rotifers actively. In $20\~22$ days after hatching the larvae grew to 5.85 mm in 71, and the caudal notochord flex at $45^{\circ}$.

• Korean Journal of Plant Taxonomy
• /
• v.36 no.1
• /
• pp.61-89
• /
• 2006

Algific talus slopes are local cold micro-environmental habitats where cool air escapes through vents and fissures of talus layer, and ice forms in summer. To access the phytogeographical significance and to develop the conservation strategy on vegetation of the algific talus, plant species composition on seven algific talus in South Korea was investigated. As a results, phytogeographically significant northern elements such as Cystopteris fragilis (L.) Bernh., Diplazium sibiricum (Turcz. ex Kunze) Sa.Kurata, Polypodium virginianum L., Vaccinium vitis-idaea L. and Hackelia deflexa (Wahlenb.) Opiz were distributed in these algific talus slopes (below $N37^{\circ}43^{\prime}$). In addition, subalpine species such as Woodsia subcordata Turcz, Rosa suavis willd., Clematis fusca var. coreana ($H.L{\acute{e}}v.$ & Vaniot) Nakai, Calamagrostis langsdorfii (Link) Trin. and Carex vaginata var. petersii (C.A.Mey.) Akiyama were also distributed as typical relictual species of these algific talus (less than alt. 400m). The algific talus slopes in Korean peninsular can be regarded as the insular refugia that northern plant species advanced southward during the latest glacial age have been isolated and adapted in some local microhabitats. Because the algific talus slopes as paleorefugia are very important in terms of phytogeography as well as meteorology ans geology, developments of strategies for in situ and ex situ conservation on these small isolated and threatened populations associated with the algific talus urgently needed.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.461-468
• /
• 2006

Optical characteristics in polymer films of MEH-PPV/DFPP blends were for the first time investigated. DFPP (N, N'-diperfluorophenyl-3,4,9,10-perylenetetracarboxylic diimide) used here was a novel n-type polymer, which had good stability in air and solubility in common solvents. For a 1:9 DFPP:MEH-PPV blend, highly efficient quenching of photoluminescence (PL) was observed. In addition, the photocurrent responses of these MEH-PPV/DFPP photovoltaic cells were measured. When the light intensity was $50mW/cm^2$, short-circuit photocurrent densities were two times higher than those of single layer MEH-PPV devices.

• Journal of Sericultural and Entomological Science
• /
• v.3
• /
• pp.37-43
• /
• 1963

This experimental work was carried out to know the best method in producing the root stock effectively. The major experimental work was carried out by using Kairyo-Nezumigaeshi, and the comparative works were carried out by using Ichi-Hei, Kairyo-Nezumigaeshi, Ro-Soh, Yongchon-Chuwoo and Suwon No. 4. Results obtained from the test are as follows. 1. The larger size of the branch burried, the better live ratio and the quality of the sapling was found, and there was no significant difference between the top part and bottom part of the branch from the point of view of the ratio, but it was found that the top part showed better live ratio and quality. Mean time there was no difference in live ratio between the two sprouts root-stock type and the three sprouts root-stock type. 2. When the live ratio and sapling quality was compared from the aspect of the new root development, the heavy and medium developed root type showed better result than the poor developed one. 3. For the ambushing depth test of the root-stock, the root-stock which was painted with paraffin on the top and exposed in the air was found to have best live ratio. Mean time, even though paraffin was not painted all the top of the root-stock, the one which was exposed the top of it or the one ambushed with thin soil layer, showed better live ratio than the one deep ambushed. 4. There was difference for the live ratio between the perpendicularly ambushed root-stock and the lied ambushed mot-stock, but the former method showed better sapling quality. 5. The soil nature did not show any difference for the live ratio between the sand loam and clay loam, but the former one showed better sapling quality. 6. There was no difference live ratio between the mulberry varieties, but Yongchon-Chuwoo showed best sapling quality. 7. The grafted sapling production cost was 2.30 won and cattage sapling cost was 1.61 won.

• Journal of the Korean earth science society
• /
• v.40 no.1
• /
• pp.24-36
• /
• 2019

In the mid-eastern Yellow Sea, glacio-eustatic sea-level fluctuations and a regional tectonic subsidence have combined to represent an aggradational stacking pattern of sedimentary units during late Pleistocene-Holocene. The accumulated sediments are divisible into two-type units of Type-A and Type-B in high-resolution air-gun seismic profiles and the deep-drilled core of YSDP-105. Type-A unit largely comprises clast-rich coarse-grained sediments of non-marine to paralic origin, whereas Type-B unit consists mostly of tidal fine-grained sediments. Based on a bottom model of the sedimentary units, this study suggested a geoacoustic model of long-coring bottom layers at the YSDP-105 drilling site of the mid-eastern Yellow Sea. The geoacoustic model of 64-m depth below the seafloor with four-layer geoacoustic units was reconstructed in continental shelf strata at 45 m in water depth. For actual modeling, the geoacoustic property values of the models were compensated to in situ depth values below the seafloor using the Hamilton modeling method. We suggest that the geoacoustic model will be used for geoacoustic and underwater acoustic experiments of mid- and low-frequency reflecting on the deep bottom layers in the mid-eastern Yellow Sea.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.864-870
• /
• 2018

The effect of lower bed height on the collapse velocity was investigated for a two-stage bubbling fluidizedbed (0.1 m in diameter, 1.2 m high) connected with a standpipe (0.025 m in diameter) for solid transport. Air was used as fluidizing gas and mixture of coarse (< $1000{\mu}m$ in diameter and $3625kg/m^3$ in apparent density) and fine (< $147{\mu}m$ in diameter and $4079kg/m^3$ in apparent density) particles as solid particles. Mixing ratio of fine particles, height of the lower bed and the distributor of the upper bed were considered as experimental variables. The collapse velocity increased with static height of the lower bed. However, the effect decreased as the mixing ratio of fine particles increased. The effect seemed to be attributed to the increase in height of the dense layer of coarse particles that prevented the gas from flowing into the standpipe, not in pressure drop for the standpipe, as the bed height increased. The collapse velocity decreased a little as the pressure drop of the distributor of the upper bed increased. An improved correlation was proposed for predicting the collapse velocity.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.639-645
• /
• 2020

Among the components of redox flow battery (RFB), the electrode serves as a diffusion layer of an electrolyte and a path for electrons and also is a major component that directly affects the RFB performance. In this paper, chloric/sulfuric mixed acidwas used as a supporting electrolyte in RFB system with Fe2+/Fe3+ and V2+/V3+ as redox couple. The optimum electrode and activation temperature were suggested by comparing the capacity, coulombic efficiency and energy efficiency according to the electrode type and activation temperature. In the RFB single cell evaluation using 5 types of carbon electrodes used in the experiments, all of them showed close to the theoretical capacity to retain the reliability of the evaluation results. GFD4EA showed relatively excellent energy efficiency and charge/discharge capacity. In order to investigate the electrochemical performance according to the activation temperature, GFD4EA electrode was activated by heat treatment at different temperatures of 400, 450, 500, 600 and 700 ℃ under an air atmosphere. Changes in physical properties before and after the activation were observed using electrode mass retention, scanning electron microscope (SEM), XPS analysis, and electrochemical performance was compared by conducting RFB single evaluation using electrodes activated at each temperature given above.