• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.660-664
• /
• 2001

Ringbom Stirling engine which is a kind of low temperature difference model Stirling engine is manufactured and its characteristics are measured at some temperature differences. Pressure, displacer position and rotation speed are measured. Displacer position and rotation speed are detected by photo-sensor. The hot side of Ringbom Stirling engine is warmed by electric heater. The cold side of Ringbom Stirling engine is cooled by the air. This result may be useful for further design and manufacture of Ringbom Stirling engine. Also, it would be used as an educational material for mechanical engineering students.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.387-388
• /
• 2003

습식 배연탈황 공정에서는 흡수탑 내에서의 황산화물 흡수율을 높일 목적으로 흡수탑으로 유입되는 배기가스를 약 5$0^{\circ}C$까지 냉각하고, 처리된 배기가스는 연돌에서의 자연 통풍력을 확보하고 연돌 배출 후 수분의 응축으로 인한 백연(white Plume)의 문제를 방지하고자 통상 9$0^{\circ}C$ 이상으로 가온하는 것이 일반적이며 이를 위해 다양한 형식의 열교환기가 설치 운영되고 있다. 탈황공정에서 흔히 GGH(gas to gas heater)라 불리는 Ljungstrom 방식의 열 교환기는 미처리된 고온가스와 처리된 저온 가스가 회전하는 열교환소자로 이루어진 영역을 지나면서 열 교환이 이루어지는 형태로 회전 부위 및 두 가스흐름의 구분 판(sector plate) 등에서 필연적으로 처리가스 흐름 중으로 미처리 가스의 누입이 일어나게 된다. (중략)

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.477-481
• /
• 2002

This paper reports on the development of micro power system component under way at Seoul National University. The need of micro power system is explained and components of micro power system are described. The developments of hydrogen-air micro combustor, micro igniter based poly-silicon heater and micro thruster are described. To manufacture 3-D micro structure the process that manufactures high aspect ratio structures has been developed and optimized. Design, fabrication, and experiment processes are introduced and technical challenges in each phase are described.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2005.10a
• /
• pp.149-153
• /
• 2005

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.313-319
• /
• 1999

간접열식 LPG온풍난방기는 LP(Liquefied Petroleum)가스를 열원으로 한 온풍난방기를 말한다. LP가스는 프로판(Propane, $C_3$H$_{8}$)과 부탄(Butane, $C_4$H$_{10}$)을 주성분으로 하는 혼합물로 에탄, 프로필렌, 부틸렌 등이 약간 포함되어 있는 기체로 액화 및 기화가 쉬우며 기체상태에서는 비중이 공기보다 무겁고 액체상태에서는 물보다 가볍다. 또한, 기화할 때는 다량의 열과 연소시 많은 공기를 필요로 하고 온도에 따라 액체의 부피가 변하는 특성을 가지고 있으며 무색, 무취, 무독하다. LP가스의 발열량은 12,000kcal/kg으로 경유나 보일러등유 보다 약 30% 정도 높아 난방연료로서의 사용 및 취급성이 우수하다. (중략)

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2003.04a
• /
• pp.38-43
• /
• 2003

우리나라의 시설재배면적은 2001년 현재 52,135ha이고 이중가온 재배면적이 12,710ha로 전체 시설재배면적의 25%에 해당하며 또한 난방비용이 경영비 중 차지하는 비중이 시설재배 선진국의 15%에 비하여 25-30%을 차지하고 있어 난방비의 비중이 높다. 온풍난방시 시설내 에너지 절감을 위한 국내의 연구는 주로 보온, 난방기의 위치 및 Duct의 토출구 간격 및 직경(Kim 등, 1994), 난방배관 구조개선(Kwon 등, 1992)등으로 연구되어 왔다. (중략)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.127-133
• /
• 2008

Since the 1960's, exhaust gas recirculation(EGR) has been used effectively in spark ignition(SI) engines to control the exhaust emissions of the oxides of nitrogen(NOx). The most important requirements for the application of EGR systems to conventional SI engines are controllable flow rate and good dynamic response. In order to evaluate the characteristics of the electronic EGR valve, a test bench which is consisted of blower, heater, air flow meter and driving unit for electronic EGR valve was set up to simulate engine operating conditions. During the tests, the valve actuation parameters were controlled and the valve lifts and flow rates were measured to infer the characteristics of EGR valve. The results confirmed the capabilities of mathematical analysis and it seems that the correction for the valve lift and potentiometer output is necessary to achieve precise control of EGR rates.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.3
• /
• pp.127-132
• /
• 2014

The semi-solid metal forming process has been applied to realize a near-net shape fabrication of a high speed tool steel. A complicatedly shaped part out of SKH51 was successfully manufactured by introducing pertinent materials, tooling and processing conditions. A SKH51 billet with globular grains was heated at temperatures between 1300 and $1350^{\circ}C$ using high frequency induction heater to get semi-solid microstructure before high rate injection of mushy metal into a die cavity for the forming process. It was necessary to control the preheating of dies between 300 and $400^{\circ}C$ to maintain the homogeneous microstructure during the semi-solid metal forming process. Significant defects such as pores, high fraction of liquid fraction and segregation could be removed from the part by using air vents.

• Journal of computational fluids engineering
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2016

Atmospheric icing may have significant effects not only on safety of aircraft in air, but also on performance of wind turbine and power networks on ground. Thus, ice protection measure should be developed to protect these systems from icing hazards. A very efficient method is the electro-thermal de-icing based on a process by which ice accretion is melted and blown away through aerodynamic forces. In this computational study, a state-of-the-art icing code, FENSAP-ICE, was used for the analysis of electro thermal de-icing system. Computational results including detailed conjugate heat transfer analysis were then validated with experimental data. Further, the computational model was applied to the DU21 airfoil section of NREL 5MW wind turbine with calculated heater parameters.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1385-1390
• /
• 2009

In this study the purpose is development of passive cooling system for telecommunication cabinet used by latent heat material. This cooling system is not required for electronic power. It was tested for the performance of the telecommunication combined latent heat material with $48^{\circ}C$ of phase changed temperature and heat pipe. At $45^{\circ}C$ of outside temperature, when heater power was 1,000 W and 1,500 W, the inside temperature of the cabinet was $55^{\circ}C$ and $62^{\circ}C$. This system was showed better performance than the other systems.