• Journal of The Korean Association For Science Education
• /
• v.25 no.7
• /
• pp.773-786
• /
• 2005

This study investigated high school student and chemistry teacher perceptions on the effect of water vapor in the air on evaporation and boiling of water by a questionnaire. In science textbooks evaporation and the boiling of water are related to the vaporization concept, boiling is related to vapor pressure and air pressure, and vapor pressure is related to the vapor concept in the air. High school student and chemistry teacher perceptions on these linkages were compared. Science textbooks were also analyzed for reasons behind these diverse perceptions. Results revealed that a majority of students conceptualized that vapor in the air was related to evaporation and boiling, but were unable to distinguish the evaporation phenomena at the macroscopic level and the evaporation of water molecules at the microscopic level. They also thought that vapor in the air affected vapor pressure and boiling. Although the percentage of teacher scientific conception was higher, a great number of teachers had diverse perceptions on evaporation and boiling just as students had. Common explanations of evaporation and boiling phenomena in science textbooks were at the macroscopic level. Moreover, there were few connections of concepts even if the explanations were at the microscopic level.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.4
• /
• pp.237-246
• /
• 2011

To explore the sources of carbonaceous material in the airborne particulate matter (PM), comprehensive PM sampling was performed (3 to 14 January 2010) at a traffic hot spot site (HS), Farm Gate, Dhaka using several samplers: AirMetrics MiniVol (for $PM_{10}$ and $PM_{2.5}$) and MOUDI (for size fractionated submicron PM). Long-term PM data (April 2000 to March 2006 and April 2000 to March 2010 in two size fractions ($PM_{2.2}$ and $PM_{2.2-10}$) obtained from two air quality-monitoring stations, one at Farm Gate (HS) and another at a semi-residential (SR) area (Atomic Energy Centre, Dhaka Campus, (AECD)), respectively were also analyzed. The long-term PM trend shows that fine particulate matter concentrations have decreased over time as a result of government policy interventions even with increasing vehicles on the road. The ratio of $PM_{2.5}/PM_{10}$ showed that the average $PM_{2.5}$ mass was about 78% of the $PM_{10}$ mass. It was also found that about 63% of $PM_{2.5}$ mass is $PM_1$. The total contribution of BC to $PM_{2.5}$ is about 16% and showed a decreasing trend over the years. It was observed that $PM_1$ fractions contained the major amount of carbonaceous materials, which mainly originated from high temperature combustion process in the $PM_{2.5}$. From the IMPROVE TOR protocol carbon fraction analysis, it was observed that emissions from gasoline vehicles contributed to $PM_1$ given the high abundance of EC1 and OC2 and the contribution of diesel to $PM_1$ is minimal as indicated by the low abundance of OC1 and EC2. Source apportionment results also show that vehicular exhaust is the largest contributors to PM in Dhaka. There is also transported $PM_{2.2}$from regional sources. With the increasing economic activities and recent GDP growth, the number of vehicles and brick kilns has significantly increased in and around Dhaka. Further action will be required to further reduce PM-related air pollution in Dhaka.

• Membrane and Water Treatment
• /
• v.5 no.2
• /
• pp.109-122
• /
• 2014

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.2
• /
• pp.37-44
• /
• 2014

The $Li-O_2$ battery has been attracting much attention recently, due to its very high theoretical capacity compared with Li-ion chemistries. Nevertheless, several studies within the last few years revealed that Li-ion derived electrolytes based on alkyl carbonate solvents, which have been commonly used in the last 27 years, are irreversibly consumed at the $O_2$ electrode. Accordingly, more stable electrolytes are required capable to operate with both the Li metal anode and the $O_2$ cathode. Thus, due to their favorable properties such as non volatility, chemical inertia, and favorable behavior toward the Li metal electrode, ionic liquid-based electrolytes have gathered increasing attention from the scientific community for its application in $Li-O_2$ batteries. However, the scale-up of Li-$O_2$ technology to real application requires solving the mass transport limitation, especially for supplying oxygen to the cathode. Hence, the 'LABOHR' project proposes the introduction of a flooded cathode configuration and the circulation of the electrolyte, which is then used as an oxygen carrier from an external $O_2$ harvesting device to the cathode for freeing the system from diffusion limitation.

• Advances in environmental research
• /
• v.2 no.2
• /
• pp.143-153
• /
• 2013

This study investigated the concentrations of odourous compounds in air, leachate, stream and well in and around Taju-Bello dumpsite. Meteorological parameters (temperature, relative humidity, wind velocity) and six odour families comprising sulphur ($H_2S$), ammonia ($NH_3$), aromatic (benzene, toluene, ethylbenzene, styrene, p-xylene, m-xylene), aliphatic (hexane), oxygenated (formaldehyde, acetaldehyde) and halogenated (tetrachloroethene, trichloroethene, carbontetrachloride) compounds were measured. Meteorological parameters suggested low dispersal of pollutants at L1 with possible perspiration and suffocation from exposure to high temperature, relative humidity and low wind velocity. The trend of abundance of odourous compounds at studied locations is of the order dumpsite (L1) > leachate (L4) > 100 m away from dumpsite (L2) > 200 m away from dumpsite (L3) > stream (L5) > well (L6). $H_2S$, Oxygenated and aromatic compounds were the major contributors to odour strength in these locations. Correlation, factor and cluster analyses of the data revealed similarities of sources as biogenics and xenobiotics inherent in the wastes as the main sources of these odourous compounds.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1717-1722
• /
• 2021

This study is devoted to the ability of carbon fiber material samples impregnated with various amounts of barium iodide and triethylenediamine to remove radioactive methyliodide from air streams. The main sorption characteristics of impregnated UVIS® carbon fiber were determined and the use of this material for purifying of technological gas flows at nuclear power plants was evaluated. The methyliodide trapping efficiency by samples impregnated with barium iodide, TEDA, and their mixture was 83.4 ± 0.8%; 93.1 ± 0.6% and 93.5 ± 0.7% respectively, under the same conditions. The study established a significantly higher capacity (8.3 ± 0.07 mg/cm²) of samples impregnated simultaneously with both chemical compounds toward methyliodide. Under the same test conditions, the values of this parameter for the samples impregnated separately with TEDA and BaI₂ were 2.85 ± 0.05 mg/cm² and 0.86 ± 0.04 mg/cm², respectively.

• Applied Biological Chemistry
• /
• v.37 no.6
• /
• pp.487-491
• /
• 1994

Relative crystallinities, saccharification efficiency, and diazinon(pesticide) residues of rice and rice hull puffed by hot air puffer were investigated. Crystallinities of rice starch in the puffed rice were decreased as compared to those in cooked rice, and those of rice hull were slightly decreased as compared to those in raw hull. By puffing of glutinous rice, the saccharification efficiency treated with malt amylase was higher than in cooked rice, and hydrolysis ratio of rice hull by cellulase was also increased from 14% to 30% by puffing. The residual contents of diazinon of the puffed rice and rice hull were decreased to 42.7% and 47.6%, respectively. In addition, its decreasing rate in nonglutinous rice were higher than that of glutinous rice.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1090-1097
• /
• 1998

Lidocaine compounds have widely been used as local anesthetics. Regarding the molecular mechanism for anesthesia by lidocaine, it is proposed that lidocaine molecules penetrate to the hydrophobic region of cell membrane and expand the membrane volume, producing a change in protein conformation that blocks sodium permeability or lidocaine molecules directly adsorb into lidocaine receptor in the protein channel without expanding the cell membrane. But these proposals have never been proven experimentally. In this study, the expansion of cell membrane by lidocaine compounds was investigated by employing lipid monolayer at the air/water interface as the mimetic system of cell membrane. It was found that oil-soluble lidocaine contracted the area/molecule of lipid in the monolayer of phosphatidyl choline, sphingomyelin, DS-PL95E and lipoid, but expanded the monolayer of phosphatidyl ethanolamine only in a certain range of mixing ratios. On the contrary, water-soluble lidocaine-HCl salt expanded the monolayers of all lipids used in this study.

• Applied Biological Chemistry
• /
• v.38 no.4
• /
• pp.297-301
• /
• 1995

The saccharification ratio and efficiency of alcohol fermentation from hot air puffed and steamed flour of husked rice and barley varieties were compared. Enzymatic hydrolysis of husked rice flour was improved by puffing, and that of glutinous rice was higher than that of nonglutinous one. By puffing of husked rice and barley, alcohol production was slightly increased, but fermentation period was reduced comparing with steam cooked husked rice and barley. Fermentation efficiencies of husked rice by puffing and rice by steam cooking were 90.72% and 87.77%, respectively. Residual reducing sugar of barley mash was higher than that of rice mash. The pH of mash was gradually increased during fermentation and was high in case of puffing treatment.

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.113-121
• /
• 2017

In flight particulate matter particularly emissions generated by incomplete combustion processes has become a subject of global concern due to the health problems and environmental impacts associated with them. This has compelled most countries to set standards for coarse and fine particles due to their conspicuous impacts on environment and public health. This contribution therefore explores forest fire emissions and how its particulates affects air quality, damage to vegetation, water bodies and biological functions as architects for lung diseases and other degenerative illnesses such as oxidative stress and aging. Soot was collected from simulated forest fire using a clean glass surface and carefully transferred into amber vials for analysis. Volatile components of soot were collected over 10 mL dichloromethane and analyzed using a QTOF Premier-Water Corp Liquid Chromatography hyphenated to a mass selective detector (MSD), and Gas Chromatograph coupled to a mass spectrometer (GC-MS). To characterize the size and surface morphology of soot, a scanning electron microscope (SEM) was used. The characterization of molecular volatiles from simulated forest fire emissions revealed long chain compounds including octadec-9-enoic acid, octadec-6-enoic acid, cyclotetracosane, cyclotetradecane, and a few aromatic hydrocarbons (benzene and naphthalene). Special classes of organics (dibenzo-p-dioxin and 2H-benzopyran) were also detected as minor products. Dibenzo-p-dioxin for instance in chlorinated form is one of the deadliest environmental organic toxins. The average particulate size of emissions using SEM was found to be $11.51{\pm}4.91{\mu}m$. This study has shown that most of the emissions from simulated forest fire fall within $PM_{10}$ particulate size. The molecular by-products of forest fire and particulate emissions may be toxic to both human and natural ecosystems, and are possible precursors for various respiratory ailments and cancers. The burning of a forest by natural disasters or man-made fires results in the destruction of natural habitats and serious air pollution.