• Korean Security Journal
• /
• no.14
• /
• pp.367-388
• /
• 2007

Some of individuals working at various fields of security guard are given the legal right to use a gun to cope with expected risks and crimes. Not only in Korea but also throughout the world, a pistol is being used as a device for the workers of security guard such as the army, the police and intelligence agencies to keep the law and social order. A pistol, which is regarded as the last safety measure of security guard, is easy to carry but, because of its short barrel for high portability, its hit ratio and long-range shooting performance are much lower than ordinary guns. Despite such weak points, a pistol can be a great tool because of its high portability and if the users make steady efforts to improve their skills and, for this reason, it has been being used widely until now. National agency workers' pistol shooting skills depend on several important factors, but for the fast and accurate shooting, the mot important factor is how to aim at the target. Because it takes a relatively longer time to align the sight on the target, the change of the sight alignment method is expected to improve pistol shooting skills a lot. In Korea, however, most of national agency training centers teach the basic aiming method that crosses the foresight and the backsight and aligns the crossing to the target. That is, they teach the sight alignment method for fixed targets. Some agencies in Korea and foreign countries that have used guns more frequently and longer than us are teaching different sight alignment methods as well. Representative ones of them are aiming only with the foresight and pointing shooting. These aiming methods are expected to produce good results against moving targets. While the basic sight alignment method has to cross the foresight and the backsight and then to align the crossing to the target, so takes a longer time than other aiming methods, the other two aiming methods are expected to be effective in fields where both swiftness and accuracy are require. Because domestic agencies are teaching mainly the basic sight alignment method, the present study purposed to examine the effects of different aiming methods on shooting records and ultimately to contribute to national agency workers' operation. For this purpose, we selected 20 policemen from local police commandos under the National Police Agency who were accustomed to pistol shooting and measured their pistol shooting. According to the results, the pointed shooting method showed the best record in 5m short.range shooting. As to hit ratio in 15m shooting, which is relatively long.range for pistol shooting, the basic aiming method showed the best record, but the results of statistical analysis showed that pointed shooting is most superior. Of course, the results were obtained from a group who were used to and skillful in pistol shooting, but they are considered meaningful in that all the police and national agency workers should have such high shooting skills.

• Communications for Statistical Applications and Methods
• /
• v.2 no.2
• /
• pp.166-175
• /
• 1995

When a neutral particle beam(NPB) aimed at the object and receive a small number of neutron signals at the detector without any errors, it obeys Poisson law. Under the two assumptions that neutral particle scattering distribution and aiming errors have a circular Gaussian distributions that neutral particle scattering distribution and aiming errors have a circular Gaussian distribution respectively, an exact probability distribution of neutral particles vecomes a Poisson-power function distribution. We study and prove some properties, such as limiting distribution, unimodality, stochastical ordering, computational recursion fornula, of this distribution. We also prove monotone likelihood ratio(MLR) property of this distribution. Its MLR property can be used to find a criteria for the hypothesis testing problem.

• Archives of Craniofacial Surgery
• /
• v.12 no.1
• /
• pp.1-5
• /
• 2011

Purpose: The management of frontal sinus fractures and frontal sinus outflow tract (=FSOT) injuries is controversial. Traditional treatments include frontal sinus obliteration with a variety of material grafts, which all employ complicated algorithms for treatment planning. A simplified algorithm aiming for frontal sinus ventilation, however, can be achieved through the advanced technology of image guided endoscopic surgery and instruments. The authors explain this simplified treatment algorithm of frontal sinus fractures. Methods: The authors reviewed articles on the management of frontal sinus fractures. Results: Complicated treatment planning algorithms of frontal sinus fractures aiming for obliteration were replaced with a simplified algorithm aiming for ventilation of the frontal sinus. Conclusion: The authors suggest that a simplified algorithm can replace the complicated algorithms in selective cases.

• Journal of Radiation Protection and Research
• /
• v.42 no.1
• /
• pp.21-25
• /
• 2017

Background: We are developing L-band and S-band microwave dielectric absorption systems aiming novel dosimetry using DNAs, such as plasmid DNA and genomic DNA, and microwave technology. Materials and Methods: Each system is composed of a cavity resonator, analog signal generator, circulator, power meter, and oscilloscope. Since the cavity resonator is sensitive to temperature change, we have made great efforts to prevent the fluctuation of temperature. We have developed software for controlling and measurement. Results and Discussion: By using this system, we can measure the resonance frequency, f, and ${\Delta}Q$ (Q is a dimensionless parameter that describes how under-damped an oscillator or resonator is, and characterizes a resonator's bandwidth relative to its center frequency) within about 3 minutes with high accuracy. Conclusion: This system will be expected to be applicable to DNAs evaluations and to novel dosimetric system.

• Journal of Industrial Technology
• /
• v.34
• /
• pp.3-9
• /
• 2014

As importance of quality control in corporate environments is increasing, new methods for quality control have been suggested by various researchers. Based on gamification theory, this study suggests a new method for quality control. Firstly, this paper defines three problems of quality control that can be easily faced with in corporate environments. Secondly, three gamification methods aiming quality improvement are suggested. Finally, a survey is provided to prove the effect of the suggested gamification methods. Comparing the suggested gamification methods with the existing quality control methods, this study found that the suggested gamification methods could improve the level of quality control.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.1
• /
• pp.9-13
• /
• 2015

Objective : To improve pedicle screw placement accuracy with minimal radiation and low cost, we developed specially designed K-wire with a marker. To evaluate the accuracy of thoracolumbar pedicle screws placed using the novel guide-pin and portable X-rays. Methods : Observational cohort study with computerized tomography (CT) analysis of in vivo and in vitro pedicle screw placement. Postoperative CT scans of 183 titanium pedicle screws (85 lumbar and 98 thoracic from T1 to L5) placed into 2 cadavers and 18 patients were assessed. A specially designed guide-pin with a marker was inserted into the pedicle to identify the correct starting point (2 mm lateral to the center of the pedicle) and aiming point (center of the pedicle isthmus) in posteroanterior and lateral X-rays. After radiographically confirming the exact starting and aiming points desired, a gearshift was inserted into the pedicle from the starting point into the vertebral body through the center of pedicle isthmus. Results : Ninety-nine percent (181/183) of screws were contained within the pedicle (total 183 pedicle screws : 98 thoracic pedicle screws and 85 lumbar screws). Only two of 183 (1.0%) thoracic pedicle screws demonstrated breach (1 lateral in a patient and 1 medial in a cadaver specimen). None of the pedicle breaches were associated with neurologic or other clinical sequelae. Conclusion : A simple, specially designed guide-pin with portable X-rays can provide correct starting and aiming points and allows for accurate pedicle screw placement without preoperative CT scan and intraoperative fluoroscopic assistance.

• Journal of the Korean Society of Costume
• /
• v.57 no.3 s.112
• /
• pp.136-149
• /
• 2007

This study researched the costume manufacture process by having the musical 'Christmas Carol' as an example and specifically presented the costume manufacture process of an actually performance work, thus it aimed to be helpful theoretically and realistically, by allowing theatrical costume manufacturers and majors in theatrical costume to be informed of the systematically practical affair process of the theatrical costume manufacture and by exhibiting the research work of costume composition aiming at reproducing a silhouette in the process such as costume composition and sewing, and the effectively manufacturing methods such as the costume composition application and the sewing method development aiming at the activity of performers. In the empirical research, it analyzed the features of characters and arranged the manufacture points while actually manufacturing the performance costume, and clarified the systematically performance costume manufacture process such as a manufacture meeting${\rightarrow}$costume list preparation$\rightarrow$work-instruction sheet preparation$\rightarrow$pattern manufacture$\rightarrow$sewing$\rightarrow$performance and inspection. Through performing the manufacture of the really performance work, it is hoped that this study contributes to the development of performance art circles, by presenting a step and a method of professionally theatrical costume to the performance manufacturers and the theatrical costume manufacturers at present when the theatrical costume is solidifying its position as a professional sphere, in the performance and an, has a meaning as the initially empirical research, which can exhibit as a guide of realistically and empirically educational contents for theatrical costume aiming to bring up professional staff for theatrical costume, and becomes help in the efficiently theatrical costume manufacture realistically.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.315-327
• /
• 2017

In this paper, we present a method for estimating of position and velocity of a moving target by using the range and the bearing measurements from multiple sensors of aiming unit. In many cases, conventional low cost gyro sensor and a portable laser range finder(LRF) degrade the accuracy of estimation. To enhance these problems, we propose two methods. The first is background image tracking and the other is principal component analysis (PCA). The background tracking is used to assist the low cost gyro censor. And the PCA is used to cope with the problems of a portable LRF. In this paper, we prove that our method is robust with respect to low-frequency, biased and noisy inputs. We also present a comparison between our method and the extended Kalman filter(EKF).

• Safety and Health at Work
• /
• v.10 no.2
• /
• pp.180-187
• /
• 2019

Background: There is considerable evidence that leadership influences workplace safety, but less is known about the relative importance of different leadership styles for safety. In addition, a leadership style characterized by an emphasis and a focus on promoting safety has rarely been investigated alongside other more general leadership styles. Methods: Data were collected through a survey to which 269 employees in a paper mill company responded. A regression analysis was conducted to examine the relative roles of transformational, transactional (management-by-exception active; MBEA), and safety-specific leadership for different safety behavioral outcomes (compliance behavior and safety initiative behaviors) and for minor and major injuries. Results: A safety-specific leadership contributed the most to the enhanced safety of the three different kinds of leadership. Transformational leadership did not contribute to any safety outcome over and above that of a safety-specific leadership, whereas a transactional leadership (MBEA) was associated with negative safety outcomes (fewer safety initiatives and increased minor injuries). Conclusion: The most important thing for leaders aiming at improving workplace safety is to continuously emphasize safety, both in their communication and by acting as role models. This highlights the importance for leadership training programs aiming to improve safety to actually focus on safety-promoting communication and behaviors rather than general leadership. Furthermore, an overly monitoring and controlling leadership style can be detrimental to attempts at achieving improved workplace safety.

• Steel and Composite Structures
• /
• v.21 no.5
• /
• pp.1069-1084
• /
• 2016

This paper introduces a new and effective design amplification factor-based approach for reliable optimum design of trusses. This paper may be categorized as in the family of decoupled methods that aiming for a reliable optimum design based on a Design Amplification Factor (DAF). To reduce the computational expenses of reliability analysis, an improved version of Response Surface Method (RSM) was used. Having applied this approach to two planar and one spatial truss problems, it exhibited a satisfactory performance.