• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.239-245
• /
• 1993

Xinjiang locates on the Middle Eurasia. Droaght features Xinjiang's climate , especially during the spring sowing season. Therefore, efficiency irrigation system is indispensable to Xinjiang farming. Furrow orborder irrigation system has replaced flooding irrigation. In farmland , new irrigation methods have been developed and introduced to more fields. This article introduce tow sowing machines for new irrigation methods. (1) Furrow or border grain drill : (2) On-firm irrigation drill.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2004년도 춘계학술대회 논문집
• /
• pp.184-189
• /
• 2004

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.746-754
• /
• 1996

Grading and sorting fresh cut flowers are time consuming process. In Korea, cut flowers are sorted mostly by human inspection due to the lack of adequate machinery. In this paper, quality evaluation factors of cut flowers are discussed, and types of sorting machines existing in the market are introduced . Aspects of computer image processing in evaluation the quality of cut flowers are also discussed.

• 제어로봇시스템학회논문지
• /
• 제21권5호
• /
• pp.447-452
• /
• 2015

A hybrid power system was developed for agricultural machines with a 20kW output capacity, and it was attached to a multi-purpose cultivator to improve the performance of the cultivator. The hybrid system combined heterogeneous sources: an internal-combustion engine and an electric power motor. In addition, a power splitter was developed to simplify the power transmission structure. The cultivator using a hybrid system was designed to have increased fuel efficiency and output power and reduced exhaust gas emissions, while maintaining the functions of existing cultivators. The fuel consumption for driving the cultivator in the hybrid engine vehicle (HEV) mode was 341g/kWh, which was 36% less than the consumption in the engine (ENG) mode for the same load. The maximum power take off output of the hybrid power system was 12.7kW, which was 38% more than the output of the internal-combustion engine. In the HEV mode, harmful exhaust gas emissions were reduced; i.e., CO emissions were reduced by 36~41% and NOx emissions were reduced by 27~51% compared to the corresponding emissions in the ENG mode. The hybrid power system improved the fuel efficiency and reduced exhaust gas emissions in agricultural machinery. The hybrid system's lower exhaust gas emissions have considerable advantages in closed work environments such as crop production facilities. Therefore, agricultural machinery with less exhaust gas emissions should be commercialized.

• Journal of Biosystems Engineering
• /
• 제35권3호
• /
• pp.163-168
• /
• 2010

With income growth and "well-being" trends, sales of corn has been increased recently. Corns are processed at processing facilities on the main production site. Corn processing steps include removing bract, steaming, vacuum packing, and storing. To replace manual corn bract removing, some bract removing machines were imported and used. However, the machines were abandoned shortly, because of high damaging ratio of corns. In this research, factors of successful bract removing was studied with rotating rollers and air-injection nozzles to develop corn bract removing system. The test device was composed of a cylindrical roller, an air spray nozzle, a regulator, and a motor. Designing factors were roller type, diameter of air spraying nozzle, spraying angle, and spraying pressure. The measured factors were bract removing rate and damaging rate. It was found that optimum cylindrical roller surface shape was cylindrical roller and linear grove roller. This roller shape produced lowest damaging rate. Test results of the efficacy of preprocessing showed that the air spraying after preprocessing produced highest performance. The rotational speed and inclination of the roller didn't affect the bract removing performance. Optimum injection angle of the air jet nozzle was $70^{\circ}$. To increase bract removing rate and to reduce corn damage, required injection pressure and injection nozzle diameter were decided to less than 0.4 MPa and 2.5 mm, respectively. More than 3 times of nozzle passing produced good bract removing performance and there were no significant difference between the number of passing times.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.134-140
• /
• 2013

This paper proposes a new design of rotor shape of Interior Permanent Magnet Synchronous Motor (IPMSM) used for agricultural electric vehicle (AEV). The distribution of the residual magnetic flux density at the air gap is modified by rotor surface shape and V-type magnet angle. As a result, cogging torque and physical characteristic have been improved, and back electromotive force (back-EMF) of the suggested model has been improved to be closest to sine wave form compared to initial model. The validity of the proposed rotor shape optimization is confirmed by the manufactured IPM rotor core and measured the performance of the cogging torque.

• Journal of Biosystems Engineering
• /
• 제12권3호
• /
• pp.62-72
• /
• 1987

The necessity of using land on slopes for agricultural production has been recognized all arable land resources in plains are decreased. Mechanization is one of the main factors determining the extent of cultivating slope lands and it must be considered as a means of increasing labor productivity. This article discussed some relevent aspects of farm mechanization on slopes. It includes the potential slope land resources which can be tilled for food and forage productions, design characteristics of agricultural machines for use in slope lands, and possible solutions of the problems to be encountered in the mechanization process.

• Journal of Biosystems Engineering
• /
• 제14권1호
• /
• pp.49-57
• /
• 1989

• Journal of Information Technology Applications and Management
• /
• 제29권5호
• /
• pp.27-37
• /
• 2022

This study intends to link agricultural machine history data with related organizations or collect them through IoT sensors, receive input from agricultural machine users and managers, and analyze them through AI algorithms. Through this, the goal is to track and manage the history data throughout all stages of production, purchase, operation, and disposal of agricultural machinery. First, LSTM (Long Short-Term Memory) is used to estimate oil consumption and recommend maintenance from historical data of agricultural machines such as tractors and combines, and C-LSTM (Convolution Long Short-Term Memory) is used to diagnose and determine failures. Memory) to build a deep learning algorithm. Second, in order to collect historical data of agricultural machinery, IoT sensors including GPS module, gyro sensor, acceleration sensor, and temperature and humidity sensor are attached to agricultural machinery to automatically collect data. Third, event-type data such as agricultural machine production, purchase, and disposal are automatically collected from related organizations to design an interface that can integrate the entire life cycle history data and collect data through this.

• Journal of Biosystems Engineering
• /
• 제36권6호
• /
• pp.491-499
• /
• 2011

The objective of this study was to develop the export strategic core technologies for IT fusion next generation agricultural machines by the analysis of comprehensive and cooperative systems of industries, universities, and institutes. In order to achieve the objective of this study, an expert panel was formed and operated. The first survey was conducted by the Delphi method. For this the export strategic core technologies were surveyed and analyzed using the questionnaire. Based on the results of the first survey, the second survey was conducted. The questionnaire used for the second survey was designed by results of the first survey. The results of the second survey was analyzed by AHP method. The third survey was conducted based on the second one, and the final results were analyzed and the export strategic core technologies were developed through the expert meeting. The study results showed six export strategic core technologies as the followings : 1) environment-friendly engine technology for high performance 2) high performance/high efficiency power transmission system technology 3) development of measurement system technology for safety of agricultural products 4) field application of sensor networks 5) large size combine development technology for high performance 6) quality evaluation technology for agricultural products.