• Journal of Biosystems Engineering
• /
• v.32 no.6
• /
• pp.422-429
• /
• 2007

To prevent deterioration of agricultural products during cold transportation, optimized temperature control is essential. Because the control of temperature and thermal uniformity of transported products are mainly governed by cooling air flow pattern in the transportation equipment, the accurate understanding and removal of appearance of stagnant air zone by poor ventilation is key to design of optimized cooling environment. The objectives of this study were to develop simulation model to predict the airflow and heat transfer phenomena in the cold container and to evaluate the effect of fan blowing velocity on the temperature level and uniformity of products using the CFD approach. Comparison of CFD prediction with PIV measurement showed that RSM turbulent model reveals the more reasonable results than standard $k-{\varepsilon}$ model. The increment of fan blowing velocity improved the temperature uniformity of product and reduced almost linearly the averaged temperature of product.

• Journal of Drive and Control
• /
• v.20 no.3
• /
• pp.25-34
• /
• 2023

In this study, we conducted a research on optimizing the spraying performance of agricultural drones and predicted the spraying performance in various flight conditions using the multi-layer perceptron (MLP). Data was collected using a test device for pesticide spraying performance according to the water sensitive paper (WSP) evaluation. MLP training involved supervised learning to achieve a coefficient of variation (CV), which indicates the degree of uniform spraying. The performance evaluation was conducted using R-squared (R²), the test samples showed an R² of 0.80. The results of this study showed that drone spraying performance can be predicted under various flight environments. In addition, the correlation analysis between flight conditions and predicted spraying performance will be useful for further research on optimizing the spraying performance of agricultural drones.

• Journal of Biosystems Engineering
• /
• v.16 no.3
• /
• pp.290-297
• /
• 1991

For the efficient utilization of the solar thermal energy to overcome the time gap between to supply and demand, an efficient heat storage technique, especially high density-latent-heat storage system, is necessary. In this study, the performance of a panel type latent heat storage equipment during heat discharging process was analyzed theoretically and experimentally. In order to find out the performance of the system, computer simulation programs were developed by finite difference method. The governing equations were constructed by two dimensional heat conduction model with moving boundary. The results of the experimental and the theoretical analysis were reasonably well agreed. The efficiencies of the double pipe type and the panel type latent heat storage equipment were compared.

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.413-424
• /
• 2014

Objectives: The purpose of this study was to seek measures for improvement and management of farm work safety and health by conducting questionnaire surveys and on-site investigations to ascertain the present state of occurrence of safety accidents and safety and health management levels among swine farmers. In particular, the purpose of this study is to provide basic data for the establishment of measures for the management of safety and health suitable to the characteristics of related working environments. Methods: Questionnaire surveys were conducted among 223 farmers engaged in swine farming in 14 regions, and 10 farms were visited in order to implement multilateral methods, including in-depth interviews, along with field surveys. Results: The surveys indicated that 26.2% of all respondents experienced farm-work related safety accidents and body-reaction related accidents showed a high ratio at 31.1% of all respondents. With regard to cause materials of safety accidents, work other than that directly related to swine raising showed high ratios of safety accidents, with pigsty facility related accidents at 26.6%. Although most workers recognized the dangers latent in the working environments, their behavior and responses to the prevention of safety accidents were still insufficient due to a lack of understanding of safety and health management. In the survey on the present state of personal hygiene and wearing of protective equipment, workers were found to have been exposed to dangerous and harmful environments both inside and outside pigsties, but the actual states of their wearing protective safety equipment were very poor. Conclusion: Given the results of this study, swine farmers well recognize problems in their control of safety accidents and management of safety and health, but their knowledge about safety and health education and management guidelines was insufficient. Therefore, safety and health education, public relations, and customized personal protective equipment suitable for swine raising work should be developed in order to address the foregoing problem.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1302-1311
• /
• 1993

In the 90 years or so since the beginning of the 20 th century , orchard growing and agricultural fields in Japan have undergone considerable change in terms of production volume, a seen in Fig. 1. as this change in volume progressed, sorting and packing machines have also grown from the first wooden tools, almost too simple to be called " machines" into sophisticated devices that bring together diverse technologies such as machinery , electronics, and optics. Nowadays, Japan/s agricultural industry is facing unprecedentedly serious labor shortage and the rapid aging of its experienced growers and producers, In additions, Japan has changed from a society oriented towards high-volume production and consumption to a more selective society which prefers smaller volume with the tastes of naturally ripended produce. With consumer trends changing there is a new demand on the part of growers for equipment that can not only measure the external quality of produce , but can measure inte nal quality as well.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.246-255
• /
• 1993

The paper presents the experimental studies on the effectiveness of some vibration isolators developed for reducing transmission of vibration from the powered knapsack sprayer to the back and shoulders of the operator. A test rig was used to conduct detailed experimental studies on the powered knapsack sprayer mounted on it and fitted with different vibration isolators. Structural features of vibration isolators have been presented and their effectiveness of isolating transmission of vibration, from the engine-blower of the sprayer to its main frame and the operator, has been presented and discussed. Vibration measurements and analyses made by using B & K equipment have proved that the vibration isolators are quite effective in reducing the vibration transmission. The operators felt much less discomfort when they used the sprayer fitted with the isolators developed for the purposes, as compared to the existing arrangement.

• Korean Journal of Organic Agriculture
• /
• v.21 no.1
• /
• pp.49-59
• /
• 2013

The Purpose of this paper is to analysis on farmer's awareness and satisfaction level of the project for developing large-scale environment-friendly agricultural districts (LSEAD). To analysis farmer's awareness and satisfaction level, a series of farm household surveys were conducted on farmers, take part in the project for developing LSEAD. The sample size of the survey is 80 respectively. As a survey result, awareness and practical use of facilities & equipment shows a little different outcome. Satisfaction level of the project for developing LSEAD is summarized as follows. Influence on disposal of livestock excretions and farmer's consciousness change appears 4.47 and spreading environment-friendly agriculture 4.44, distribution of environment-friendly agricultural product 4.33, and demand of environment-friendly agricultural materials 4.04. In order to sustainable development of LSEAD, a governance system should be established.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.229-234
• /
• 2011

Feasibility assessment for small hydropower plants using diversion weirs located in stream for agricultural purpose has been studied. The model, which can predict flow duration characteristic of stream, was developed to analyze the inflow caused from rainfall. And another model to predict hydrologic performance for small hydropower plants is established. Preliminary survey was performed identifying several candidate sites, and two sites were selected finally for actual site reconnaissance. During the course of site survey, generating capacity, construction and equipment cost, and payback through life time of each sites were calculated for economical feasibility analysis. The results of this study have estimated that the small hydropower plants using diversion weirs for agricultural purpose may offer better opportunities in future with increasing fuel cost and nation's energy policy.

• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.19-28
• /
• 2022

This paper introduces an automatic steering system for straight traveling capable of being mounted on drivable agricultural machinery which user can handle it such as a tractor, a transplant, etc. The modular automatic steering device proposed in the paper is composed of RTK GNSS, IMU, HMI, hydraulic valve, and wheel sensor. The path generation method of the automatic steering system is obtained from two location information(latitude and longitude on each point) measured by GNSS in advance. From HMI, a straight path(AB line) can be created by connecting latitude and longitude on each point and the device makes the machine able to follow the path. During traveling along the reference path, it acquires the real time position data every sample time(0.1s), compares the reference with them and calculates the lateral deviation. The values of deviation are used to control the steering angle of the machine using hydraulic valve mounted on the axle of front wheel. In this paper, Pure Pursuit algorithm is applied used in autonomous vehicles frequently. For the analysis of traveling characteristics, field tests were executed about these conditions: velocity of 2, 3, 4km/h which is applied to general agricultural work and ground surface of solid(asphalt) and weak condition(soil) such as farmland. In the case of weak ground state, two experiments were executed about no-load(without work) and load(with work such as plowing). The maximum average deviations were presented 2.44cm, 7.32cm, and 11.34cm during traveling on three ground conditions : asphalt, soil without load and with load(plowing).

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.107-114
• /
• 2023

Garlic is one of the major seasoned vegetables in Korea along with peppers and onions. Although it is a major cash crop, the aging population of farmers and rising labor and production costs are cited as the reasons for the decreasing production. Accordingly, it is necessary to introduce and spread garlic cultivation mechanization technology to reduce the input labor demand. In this study, conducted a field demonstration in Jeollanam-do using garlic harvesting machinery. In addition, it was intended to improve the mechanization rate of garlic harvesting by deriving factors that can apply to garlic harvesting machines in Jeollanam-do and investigating regional adaptability. As a result of the analysis, it was found that the harvesting performance of the garlic harvester and garlic collector in Jeollanam-do met the agricultural machine test standards. In addition, as a result of calculating the input effect of the mechanized work system compared to the conventional garlic harvesting work system, it was found that there was a labor-saving effect of 96.02%.